• 제목/요약/키워드: Resonance Test

검색결과 962건 처리시간 0.029초

콘크리트의 탄성계수 및 감쇠비 결정에 대한 충격공진시험 적용 (Application of Impact Resonance Test to the Determination of Elastic Modulus and Damping Ratio of Concrete)

  • 정범석;이재환;권기철
    • 콘크리트학회논문집
    • /
    • 제22권5호
    • /
    • pp.625-632
    • /
    • 2010
  • 콘크리트의 탄성계수 결정을 위해 다양한 시험기법이 사용되고 있다. 충격공진시험(IR: impact resonance test)은 비파괴시험으로서 간편한 시험장치와 단순한 시험방법이며 반복성이 뛰어나다. 또한 충격공진시험은 탄성계수 뿐만 아니라 감쇠비 결정이 가능하다. 이 연구에서는 콘트리트 시편에 대한 충격공진시험의 다양한 영향요소(시편거치 방법, 충격하중원의 특성, 신호획득 속도 등)를 평가하고 최적의 시험조건을 제시하였다. 이 연구에서 적용한 모든 시험조건 범위에서 충격공진시험에서 측정된 결과의 변동량은 공진주파수 결정에 있어서 ${\pm}0.3%$, 감쇠비 결정에 있어서 ${\pm}10.0%$로 나타났다. 충격공진시험에서 결정된 탄성계수와 정적시험에서 결정된 탄성계수를 변형률 크기를 고려하여 비교하면 비교적 서로 잘 일치함을 확인하였다.

아스팔트 콘크리트 탄성계수 결정을 위한 충격공진시험 영향요소 평가 (Evaluation of Effects on Impact Resonance Test for Determining Modulus of Asphalt Concrete)

  • 권기철;이재환
    • 한국도로학회논문집
    • /
    • 제9권2호
    • /
    • pp.89-99
    • /
    • 2007
  • 복소수계수 $E^*$로 표현되는 아스팔트 콘크리트의 탄성계수는 아스팔트 포장설계에서 매우 중요한 입력변수다. 일반적으로 아스팔트 콘크리트의 탄성계수는 동탄성 계수시험 (Dynamic Modulus Test)을 사용하여 평가한다. 그러나 동탄성계수시험은 일상적인 시험법으로 적용하기에는 고가의 시험장비, 복잡한 시험장비, 많은 시험시간 등의 문제가 있다. 이에 반하여 충격공진시험(IR: Impact Resonance test)은 비파괴시험으로서 간편한 시험장치, 단순한 시험방법이며 반복성이 뛰어나다. 본 연구의 주요 목적은 충격하중의 타격위치 시편거치 방법 충격하중원의 특성, 신호획득 속도, 신호처리방법 등을 포함한 IR시험의 시험조건의 영향을 평가하는 것이다. 본 연구에서 적용한 모든 시험조건 범위에서 충격공진시험에서 측정된 결과의 변동은 ${\pm}2.7%$ 이내에 들었다.

  • PDF

주파수 유연화 운영에 따른 발전기 축 비틀림에 관한 연구 (A Study on the Subsynchronous Resonance by Flexible Frequency Operation)

  • 조윤성
    • 조명전기설비학회논문지
    • /
    • 제29권4호
    • /
    • pp.62-68
    • /
    • 2015
  • Subsynchronous Resonance is a condition where the electrical power systems composed of generator and transmission line exchange energy with mechanical turbine-generator system at the frequency of the combined below the subsynchronous frequency. Therefore, the frequency of power systems should be associated with the subsynchronous resonance. This paper describes subsynchronous resonance by flexible frequency operation. It focuses on the characteristics and behavior of subsynchronous resonance. The subsynchronous resonance is being conducted by real-time digital simulator and the IEEE benchmark model for subsynchronous resonance have been utilized for the test systems.

Handymax 급 PC 선 Engine Casing "B" deck 의 진동 저감 (Vibration reduction of the Engine Casing "B" deck in the handymax vessel)

  • 서명갑;정태석;석호일
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.498-503
    • /
    • 2009
  • This paper presents the vibration problem of the Engine Casing (E/C) "B" deck in the handymax vessel and describes a method to avoid resonance. The first ship of the series did not have any vibration issue on the "B" deck. However, resonance condition occurred when additional machine was installed to the following vessels. To understand the dynamic characteristics of the deck, the normal mode analysis and impact test have been performed. Within the normal operating range of the vessel, the $1^{st}$ natural frequency of the E/C "B" deck is close to the main engine's $6^{th}$ order. Based on these analysis, a reinforcement on the deck was suggested and it proved to be effective. Since actual impact test after the reinforcement also confirmed the resonance avoidance.

  • PDF

750kW 풍력발전기 타워 구조의 진동 특성 (Vibration Characteristics of the Tower Structure of a 750kW Wind Turbine Generator)

  • 김석현;남윤수;은성용
    • 한국소음진동공학회논문집
    • /
    • 제15권2호
    • /
    • pp.219-224
    • /
    • 2005
  • Vibration response of the tower structure of a 750kW wind turbine (W/T) generator is investigated by measurement and analysis. Acceleration response of the W/T tower under various operation condition is monitored in real time by the vibration monitoring system using LabVIEW. Resonance state of the tower structure is diagnosed in the operating speed range. Resonance frequency range of the test model is investigated with the wind speed data of the test site. To predict the tower resonance frequency, tower is modeled as an equivalent beam with a lumped mass and Rayleigh energy method is applied. Calculated tower bending frequency is in good agreement with the measured value and the result shows that the simplified model can be used in the design stage of the W/T tower.

Tire Fluid-Structure Interaction Noise 에 관한 연구 (A Study on Tire Fluid-Structure Interaction Noise)

  • 김기전;배철용;이동하
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.204-209
    • /
    • 2004
  • Recently, the various performances of vehicle are rapidly improved. Therefore tire noise is recognized as important noise source because vehicle noise is considerably reduced. This study is performed for the control of the cavity resonance noise that is structure-borne noise, due to fluid(air)-structure interaction. For this investigation, FRF analysis has been carried out using FEM and we found an important factor affecting cavity resonance. The effect of this factor is confirmed by objective noise test. We confirmed that the result of FRF analysis and objective noise test is that the structure control of tire sidewall can reduce cavity resonance noise due to fluid-structure interaction

  • PDF

Resonance Characteristics Analysis of Grid-connected Inverter Systems based on Sensitivity Theory

  • Wu, Jian;Han, Wanqin;Chen, Tao;Zhao, Jiaqi;Li, Binbin;Xu, Dianguo
    • Journal of Power Electronics
    • /
    • 제18권3호
    • /
    • pp.746-756
    • /
    • 2018
  • Harmonic resonance exists in grid-connected inverter systems. In order to determine the network components that contribute to harmonic resonance and the composition of the resonant circuit, sensitivity theory is applied to the resonance characteristic analysis. Based on the modal analysis, the theory of sensitivity is applied to derive a formula for determining the sensitivities of each network component parameter under a resonance circumstance that reflects the participation of the network component. The solving formula is derived for both parallel harmonic resonance and series harmonic resonance. This formula is adopted to a 4-node grid-connected test system. The analysis results reveal that for a certain frequency, the participation of parallel resonance and series resonance are not the same. Finally, experimental results demonstrate that the solving formula for sensitivity is feasible for grid-connected systems.

입형펌프의 공진회피와 안전성 평가 (Resonance avoidance and Safety Evaluation of Vertical Pump)

  • 정우영;송진대
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2013년도 춘계학술대회 논문집
    • /
    • pp.698-702
    • /
    • 2013
  • This paper considers the vertical pumps resonance and soundness. Normally large vertical pump's rotating speed is low, so the low natural mode can make a resonance on the motor and motor stand assembly. The pump resonance makes a very high vibration and trouble on the pump systems. Thus to avoid pump resonance when the pump is on the resonance region, we give the added mass method and evaluate the structure soundness by computer simulation and test on the site. Furthermore we evaluate the modal sensitivity and expect running conditions by the using ISO10814.

  • PDF

충격공진시험을 이용한 노상토의 동결.융해시 강성도 변화 측정 (Stiffness change measurement for subgrade soils at freezing and thawing using impact resonance test)

  • 이재환;권기철
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.686-691
    • /
    • 2009
  • Damage due to frost action in pavement structure system is creating either frost heave or stiffness-weakening of subgrade soil follow melting. The formation of ice lenses requires a frost-susceptible soil, freezing temperatures, and continuous water supply. Eliminating one of these conditions suffices to significantly reduce the intensity of frost action. It is important to know characteristics of subgrade soil in frost susceptibility or decide degree of freezing permission. Also, study on the stiffness variation of subgrade soil during freezing and thawing cycle is very important. In this study, Impact resonance test for subgrade soil at freezing and thawing confirms that is applied for.

  • PDF

How Computed Tomography Contrast Media and Magnetic Resonance Imaging Contrast Media Affect the Changes of Uptake Counts of 201Tl

  • Lee, Jin-Hyeok;Lee, Hae-Kag;Cho, Jae-Hwan;Cheon, Miju
    • Journal of Magnetics
    • /
    • 제19권4호
    • /
    • pp.372-377
    • /
    • 2014
  • The purpose of the study is to investigate how uptake counts of $^{201}Tl$ of radioisotopes in the human body could change, when taking computed tomography and magnetic resonance imaging right after injecting contrast media. $^{201}Tl$ radioisotope substances of iodine contrast medium, which is a computed tomography contrast medium, and paramagnetic contrast medium, which is an magnetic resonance imaging contrast medium, were used as study materials. First, $^{201}Tl$ was put into 4 cc of normal saline in test tube, and then a computed tomography contrast medium of Iopamidol$^{(R)}$ or Dotarem$^{(R)}$, was put into 2 cc of normal saline in test tube. An magnetic resonance imaging contrast medium of Primovist$^{(R)}$ or Gadovist$^{(R)}$ was also put into 2 cc of normal saline in test tube. Each contrast medium was distributed to make $^{201}Tl$ as 3 mCi, with a total of 4 cc. Gamma camera, low energy high resolution collimator, and pinhole collimator were used to obtain images. The uptake count of $^{201}Tl$ was measured with 1000 frames of images, and obtained after 10 times of repetition. This study revealed that the use of Gadovist$^{(R)}$, which is an magnetic resonance imaging contrast medium, showed the smallest number of uptake count, after measuring $^{201}Tl$ uptake count by low energy high resolution collimator. On the other hand, the use of Iopamidol$^{(R)}$, which is a computed tomography contrast medium, showed the biggest difference in uptake count, when measuring $^{99m}Tc$ uptake count by Pinhole collimator. When examining with gamma camera, using contrast medium and $^{201}Tl$, identifying the changes of uptake count is very important for improving the value of diagnosis.