• 한국위성정보통신학회논문지
• /
• 제9권3호
• /
• pp.104-108
• /
• 2014

한국형발사체의 표면에 장착되는 UHF-대역 안테나의 표면에 발생하는 결빙을 모델링하고, 이러한 결빙이 안테나의 공진주파수, 반사손실 및 방사패턴 등의 주요 특성에 미치는 영향을 분석하였다. 안테나 표면결빙을 모델링하기 위해 $-180^{\circ}C$의 얼음층에 대한 비유전율을 추출하였고 추출된 비유전율을 이용하여 안테나 표면결빙 모델을 제안하였다. 중심주파수가 UHF-대역인 안테나 표면에 1mm의 결빙이 되었을 경우의 표면결빙 모델을 적용하여 시뮬레이션 한 결과, 표면결빙에 의해 안테나의 공진주파수가 21MHz 하향 되었고, 방사패턴도 전 방향에 대해 전체적으로 10dB 이상의 성능저하가 발생되었다. 따라서 실제 안테나 표면에 결빙이 발생할 경우 안테나 성능에 심각한 영향을 미칠 것으로 판단된다.

• 한국소음진동공학회논문집
• /
• 제17권9호
• /
• pp.847-852
• /
• 2007

Design aspects of a bearing casing system of a power plant are mainly focused on the strength and weight of itself to have a more stable system. Since the rotor speed often passes through the critical speed region when the operation begins, the relation between the rotating frequency of the rotor and natural frequency of the casing is very important for a prevention of resonance. However, harmonic components above the rotating frequency have often been overlooked the design for the resonance avoidance. In this paper, it is revealed that resonance vibration is generated when the natural frequency of a bearing casing is close to the one of harmonics of basic rotating frequency(1x), and as a consequence, sensing qualify of seismoprobes attached to the bearing casing structure can be seriously damaged. In order to reduce the resonance vibration, some stiffeners are added to the casing structures. Significant reduction in the magnitude of vibration corresponding to 2x harmonic of basic rotating frequency is observed from both FE analysis and experiment.

• 한국음향학회지
• /
• 제22권6호
• /
• pp.512-518
• /
• 2003

본 논문에서는 차량시스템의 진동효과를 고려하는 내구평가를 위한 공진내구해석이 수행된다. 공진내구해석을 수행하는데 있어서 주파수응답과 주파수영역의 동하중이 사용된다. 다물체 동역학해석, 유한요소해석 및 피로수명예측기법이 가상내구 평가를 위해 적용된다. 주파수응답과 동하중이력을 얻기 위해 차량 다물체 모델을 이용하여 전형적인 파트홀과 벨지안로를 통과하는 컴퓨터 시뮬레이션을 수행한다. 공진내구해석기법을 사용하여 승용차의 후방 현가장치에 대한 내구평가를 수행하고 그 결과를 준정적내구해석결과와 비교한다. 본 연구를 통하여 차량 시스템의 공진주파수를 고려한 피로수명을 초기설계 단계에서 효과적으로 평가할 수 있다는 것을 알 수 있다.

• 비파괴검사학회지
• /
• 제13권3호
• /
• pp.14-23
• /
• 1993

가시화 시험을 통하여 시험편에 부착된 초음파 진동자의 공진주파수의 측정을 시도하였다. 그 결과 시험편에 부착되어 있는 진동자의 공진주파수는 진동자 자체만의 공칭 공진주파수 보다 훨씬 낮게 나타났고, 그 정도는 주파수가 높은 진동자일수록 심하게 나타나는 것을 볼 수 있었는데, 이론적인 해석에 의한 검증 결과 그 원인이 진동자 보호용 알루미늄 판재의 공진에 의한 것으로 판명되었다.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.227-236
• /
• 2002

We have performed two kinds of experimental modal analyses fur a radial tire for passenger car under free-suspension. One is the modal analysis to obtain three-dimensional modes of tire using accelerometers and the other is the one to identify cavity resonance frequency using a pressure sensor. From the first analysis, we have obtained the three-dimensional natural modes, which makes it possible to grasp the features of the modes and to classify the vibrational modes into symmetric, non-symmetric, and antisymmetric modes in a simple way by using the experimental results. From the first and the second experimental analyses we have identified the cavity resonance frequency and its three-dimensional mode shape.

• 한국포장학회지
• /
• 제21권3호
• /
• pp.91-96
• /
• 2015

Fruit and vegetables are subjected to complex dynamic stresses in the transportation environment. During a long journey from the production area to customers using parcel delivery service, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serous fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonance frequency. The determination of the resonance frequencies of the fruit and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. Instrumentation and technologies are described for determining the vibration response characteristics of the fruits with frequency range 3 to 150 Hz. The resonance frequency of the pear ranged from 53 to 102 Hz and the amplitude at resonance was between 1.08 and 2.48 G. The resonance frequency and amplitude at resonance decreased with the increase of the sample mass, and they were slightly affected by mechanical properties such as bioyield deformation and rupture deformation. Regression analysis was performed among the relatively high correlated parameters from the results of correlation coefficient analysis.

• The Journal of Advanced Prosthodontics
• /
• 제3권1호
• /
• pp.10-15
• /
• 2011

PURPOSE. This study investigated the influence of bone quality and surgical technique on the implant stability quotient (ISQ) value. In addition, the influence of interfacial bone quality, directly surrounding the implant fixture, on the resonance frequency of the structure was also evaluated by the finite element analysis. MATERIALS AND METHODS. Two different types of bone (type 1 and type 2) were extracted and trimmed from pig rib bone. In each type of bone, the same implants were installed in three different ways: (1) Compaction, (2) Self-tapping, and (3) Tapping. The ISQ value was measured and analyzed to evaluate the influence of bone quality and surgical technique on the implant primary stability. For finite element analysis, a three dimensional implant fixture-bone structure was designed and the fundamental resonance frequency of the structure was measured with three different density of interfacial bone surrounding the implant fixture. RESULTS. In each group, the ISQ values were higher in type 1 bone than those in type 2 bone. Among three different insertion methods, the Tapping group showed the lowest ISQ value in both type 1 and type 2 bones. In both bone types, the Compaction groups showed slightly higher mean ISQ values than the Self-tapping groups, but the differences were not statistically significant. Increased interfacial bone density raised the resonance frequency value in the finite element analysis. CONCLUSION. Both bone quality and surgical technique have influence on the implant primary stability, and resonance frequency has a positive relation with the density of implant fixture-surrounding bone.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.339-344
• /
• 2007

Statement of problem. Various anodic oxidation techniques can be applied to dental implant surfaces. But the condition for optimal anodized surfaces has not been described yet. Purpose. The purpose of this investigation was to compare an implant that was oxidized by another method with $TiUnite^{TM}$ through resonance frequency analysis and histomorphometry. Material and methods. Turned (control), $TiUnite^{TM}$ and another oxidized fixtures, which used $Ca^{2+}$ solution for anodic oxidation, were placed in the tibiae of 5 New Zealand White rabbits. The bone responses were evaluated and compared by consecutive resonance frequency analysis once a week for 6 weeks and histomorphometry after a healing period of 6 weeks. Results. At the first week, both oxidized implants showed significantly higher implant stability quotient (ISQ) values than the control. No significant differences in resonance frequency analysis were found between the two oxidized groups for 6 weeks. The means and standard deviations of bone-to-implant contact (BIC) ratios were $71.0{\pm}4.2$ for $TiUnite^{TM}$, $67.5{\pm}10.3$ for the $Ca^{2+}$-based oxidation fixture, $22.8{\pm}6.5$ for the control. Both oxidized implants were significantly superior in osseointegration to the turned one. There was, however, no statistically significant difference between the two oxidized implants. Conclusion. $TiUnite^{TM}$ and the $Ca^{2+}$-based oxidation fixture showed superior early bone response than the control with respect to resonance frequency analysis and histomorphometry. No significant differences between the oxidized groups, however, were found in this investigation using the rabbit tibia model.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.187-191
• /
• 2016

Retrieving the equivalent electromagnetic parameters (permittivity and permeability) plays an important role in the research and application of metamaterials. Frequency dispersion of magnetic permeability has been theoretically predicted in a metamaterial composed of cut wire pairs (CWP) separated by dielectric substrate on the basis of circuit theory. Magnetic resonance resulting from antiparallel currents between the CWP is observed at the frequency of minimum reflection loss (corresponding to absorption peak) and effective resonator size can be determined. Having calculated the circuit parameters (inductance L, capacitance C) and resonance frequency from CWP dimension, the frequency dispersion of permeability of Lorentz like magnetic response can be predicted. The simulated resonance frequency and permeability spectra can be explained well on the basis of the circuit theory of an RLC resonator.

• 풍력에너지저널
• /
• 제9권4호
• /
• pp.57-64
• /
• 2018

To maximize power generation and reduce the construction cost of a commercial utility-grade wind turbine, the size of the wind turbine should be large. The initial design of the 12 MW University of Ulsan(UOU) Floating Offshore Wind Turbine(FOWT) was carried out based on the 5 MW National Renewable Energy Laboratory(NREL) offshore wind turbine model. The existing 5 MW NREL offshore wind turbines have been expanded to 12 MW UOU FOWT using the geometric law of similarity and then redesigned for each factor. The resonance of the tower is the most important dynamic responses of a wind turbine, and it should be designed by avoiding resonance due to cyclic load during turbine operations. The natural frequency of the tower needs to avoid being within the frequency range corresponding to the rotational speed of the blades, 1P, and the blade passing frequency, 3P. To avoid resonance, vibration can be reduced by modifying the stiffness or mass. The direct expansion of the 5 MW wind turbine support structure caused a resonance problem with the tower of the 12 MW FOWT and the tower length and diameter was adjusted to avoid a match of the first natural frequency and 3P excitation of the tower.