• 전자공학회논문지D
• /
• 제34D권6호
• /
• pp.20-32
• /
• 1997

An optimum parasitic inductance is observed for maximizing the modulation bandwidth of the multiple quantum well (MQW) electro-absorption optical modulator. For 1.1 pF device cpaacitance of the current MQW optical modulator, the optimum parasitic inductances for maximum bandwidth are calculated for different terminating resistors. In ase of 50.ohm. terminating resistor, the 3-dB modulation bandwidth can be increased 45% wider by using the optimum parasitic inductance than nothing parasitic inductance. This calculated optimum inductance can be practically implemented, since the parasitic inductance of bondwires can be accurately analyzed using the method of moments (MoM) and controlled by changing the length and shpae of bondwires.

• 대한전자공학회논문지
• /
• 제20권6호
• /
• pp.58-61
• /
• 1983

본 연구는 피이드백형 음량조절 회로와 이것에 결합한 음향재생 증폭기에 사용되는 라우드니스 제어회로에 관한 것이다. 재생 음계 레벨에 따라 변화하는 라우드니스 보상곡선에 추종하는 특성을 갖도록 브리지 트윈 T회로망과 피이드백 회로에 삽입한 석통의 음량조절용 가변저항기로 라우드니스 제어회로를 구성하였다. 이 새로운 방식에 의한 라우드니스 제어회로를 실현하여 그 특성을 측정하고 또 컴퓨터 시뮬레이션한 것을 비교한 결과 이상에 가까운 보상특성을 얻었다.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.453-456
• /
• 2010

Tantalum oxide ($Ta_2O_5$) films are of considerable interest for a range of application, including optical waveguide devices, high temperature resistors, and oxygen sensors. In this paper, we establish an anode oxidation process of tantalum thin film. The voltage drop in the electrolyte is affected not in voltage change but in current change. If the voltage drop in the electrolyte is same with cathode oxidation voltage, the current changes logarithmically in proportion to the voltage drop in interface of tantalum oxide and electrolyte. As a result of the measurement on the electrical property of tantalum oxide thin film, when the thickness of the insulator film is $1500{\AA}$, the breakdown voltage is 350volts and dielectric constant is 29.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.348-348
• /
• 2008

In recent, the concept of system-on-package (SOP) for highly integrated multifunctional systems has been paid attention to for the miniaturization and high frequency of electronic devices. In order to realize SOP, co-integration of passive devices, such as capacitors, resistors and inductors, and active devices should be achieved. If ceramic thick films can be grown at room temperature, we expect to be able to overcome many problems in conventional fabrication processes. So, we focused on the aerosol deposition method (ADM) as room temperature fabrication technology. ADM is a novel ceramic coating method based on the Room Temperature Impact Consolidation (RTIC) phenomena. This method has a wide range potential for fabrication of co-integration of passive and active devices. In this paper, I will present the future potential of ADM introducing various ceramic dielectric thick films for the integration of electronic ceramics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.481-482
• /
• 2007

This paper describes the design of a l0-bit 100 KSample/S CMOS A/D Converter for biomedical applications such as pulse oximetry, body weight scale, ECG etc. We adopted an asynchronous architecture in the 10-b DAC design and hence reduces the number of switches by 11 and resistors by 64 compared with the conventional l0-b DAC. We also reduced the power consumption compare with the conventional architecture by 0.4mW. Output offset cancellation technique is applied to the design of comparator. The total power consumption of designed circuit is 190uW at the supply voltage of 1.8V with the 0.18um general CMOS technology.

• 대한전기학회논문지
• /
• 제31권11호
• /
• pp.125-132
• /
• 1982

This paper analyzes the transient control characteristics of power system by dynamic braking. This method, one type of network switching, employs the injection of controllable shunt resistors at or near the generator bus after the disturbances. First, the power system is simulated mathematically for applying the dynamic braking. And the electrical transient control characteristics are considered by controlling the brake size and insertion time. Second, the mechanical torque of turbine-generator is calculted for the mechanical characteristics. This analysis results show that the electrical characteristics are improved but the turbine-generator shaft is impacted by brake switching. However, these problems can be solved by controlling the brake dynamically.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1640-1642
• /
• 2000

We were fabricated of NiCr thin film resitors(TFR) on $Al_{2}O_3$ substrates by dc magnetic sputtering, system. The characteristics of electrical resistance by substrates & annealing condition on the resistors were studied by X-ray Diff. and SEM, ESCA.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.608-610
• /
• 2000

The static characteristic of a piezoelectric beam is for finding resonance frequency of the beam. In practice, it is required to analyze the beam with external command circuit including capacitors, inductors, and resistors for control. It means that the proper analysis of a piezoelectric beam with external command circuit is required by a dynamic analysis. We can also got transient and steady-state solution from the analysis. In this paper, the static and dynamic characteristic of the piezoelectric beam using FEM(Finite Element Method) are proposed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2089-2091
• /
• 2000

Pulsed power systems consist of a capacitor bank, an isolated high-voltage charging power-supply, high-current bus-work for charging and discharging and a control system. In such pulsed power systems, the operating-lifetime of the capacitors is closely dependent on the voltage reversal. Hence, most capacitor-discharging systems includes crowbar circuits. The crowbar circuit prevents the capacitor recharging with reverse voltage. Usually it consists of crowbar resistors and high pulse-current diode-stacks connected in series. The requirements for the diode-stacks are fast-recovery time and high-voltage and large-current ratings, which results in the high cost of the pulsed-power system. This paper presents a protection scheme of a charging and discharging system of a 500kJ capacitor bank using a low-cost crowbar circuit and safety-fuses.

• 한국통신학회논문지
• /
• 제9권1호
• /
• pp.25-29
• /
• 1984

연산 증폭기의 능동 보상은 주파수의 증가에 따라 연산 증폭기의 위상천이와 이득의 감소를 보상한 것으로 이 결과를 VCVS와 번전 적분기에 적용하였다. VCVS의 경우 제안된 보상회로의 위상천이는 주파수에 無關하고 보상회로의 궤환저항의 比에 따라서 Soliman에 의해 제안된 보상회로보다 이득특성이 개선되며 Voltage-follower의 경우도 동일한 보상회로로서 주파수에 無關하게 위상이 보상되고 이득특성 또한 개선되었다. 그밖에 반전 적분기에서 Q-factor를 더욱 증가시키는 보상회로도 제시하였다.