• 제목/요약/키워드: Resistivity

검색결과 4,015건 처리시간 0.034초

해수침투지역에서 단일 시추공을 이용한 전기비저항 토모그래피 탐사의 적용성 (Application of Electrical Resistivity Tomography Using Single Well in Seawater Intrusion Areas)

  • 송성호
    • 지구물리와물리탐사
    • /
    • 제10권4호
    • /
    • pp.369-376
    • /
    • 2007
  • 해수침투가 우려되는 해안지역의 소유역에 설치된 모니터링용 관측정을 이용하여 전기비저항 토모그래피 탐사를 수행하였다. 전기비저항 탐사는 지하 매질의 전기비저항 분포를 통해 지반상태 및 층서구조 등을 밝히는 효과적인 방법이지만, 매질의 전기전도도가 매우 높은 해안지역에서는 신호대 잡음비가 가장 높은 배열법을 사용하는 경우에도 관측정 주변의 전기비저항 특성 파악이 힘들다. 따라서 본 연구에서는 해수침투 관측을 목적으로 설치된 해안지역의 서로 다른 두 곳의 관측정 주변 대수층에 대하여, 신호대 잡음비가 낮아 시추공 주변의 대수층 특성 파악이 어려운 지표 전기비저항 탐사의 한계를 극복하기 위하여 시추공-지표간 전기비저항 토모그래피 탐사를 수행하였다. 탐사자료를 이용한 역산 결과는 각 시추공의 시추 주상도, 전기전도도 검층 및 노말 전기비저항 검층 자료를 이용하여 시추공 주변의 파쇄구간과 비교하여 검증하였다. 또한 이들 중 한 곳의 관측정 주변 대수층에 대하여는, 동일한 탐사 방법을 이용하여 간조와 만조시에 각각 탐사를 실시하였다. 탐사 결과 관측정 주변 대수층에 대하여 높은 해상도의 전기비저항 분포 단면을 획득할 수 있었으며, 조석에 의한 대수층을 통한 해수침투와 관련된 수리특성 파악이 가능함을 확인하였다. 따라서 본 연구에서 사용된 시추공-지표간 전기비저항 토모그래피 탐사 결과를 시추 주상도, 전기전도도 검층 및 노말 전기비저항 검층 결과와 함께 분석하는 경우, 해안지역의 관측정 및 그 주변 대수층의 수리지질 구조를 효과적으로 파악할 수 있는 것으로 나타났다.

전기비저항탐사결과와 터널막장 암반분류의 상관성 검토 (A study on the correlation between the result of electrical resistivity survey and the rock mass classification values determined by the tunnel face mapping)

  • 최재화;조철현;류동우;김학규;서백수
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.265-272
    • /
    • 2003
  • In this study, the rock mass classification results from the face mapping and the resistivity inversion data are compared and analyzed for the reliability investigation of the determination of the rock support type based on the surface electrical survey. To get the quantitative correlation, rock engineering indices such as RCR(rock condition rating), N(Rock mass number), Q-system based on RMR(rock mass rating) are calculated. Kriging method as a post processing technique for global optimization is used to improve its resolution. The result of correlation analysis shows that the geological condition estimated from 2D electrical resistivity survey is coincident globally with the trend of rock type except for a few local areas. The correlation between the results of 3D electrical resistivity survey and the rock mass classification turns out to be very high. It can be concluded that 3D electrical resistivity survey is powerful to set up the reliable rock support type.

  • PDF

농경지 오염탐사를 위한 비저항콘의 적용성에 관한 연구 (A Study on the Applicability of Resistivity Cone for Contaminant Investigation in Farm Land)

  • 유찬;윤춘경
    • 농촌계획
    • /
    • 제5권1호
    • /
    • pp.45-55
    • /
    • 1999
  • The applicability of resistivity cone for contaminant investigation in farm land was examined in laboratory and in-situ. To verify the resistivity variations in sand with contaminants, laboratory experiment used soil resistivity test box was performed. Heavy metal and others ions were appeared steep variations in low concentration. Pilot test results were the same as laboratory test results. In the in-situ test used resistivity cone, resistivities of waste landfill layer were low than the common soil layers and resistivities had been difference with concentration of contaminant components. Therefore contaminant investigation in farm land using resistivity cone was expected very effective.

  • PDF

A COMPARATIVE ANALYSIS BETWEEN GROUND SUBSIDENCE AT ABANDONED UNDERGROUND COAL MINE AND ELECTRICAL RESISTIVITY SURVEY RESULTS USING GIS

  • Ahn, Seung-Chan;Lee, Sa-Ro;Kim, Ki-Dong
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
    • /
    • pp.728-731
    • /
    • 2006
  • Ground subsidence near abandoned underground coal mines has become a serious social problem in Korea. The purpose of this study is to perform a comparative analysis between the ground subsidence area and the electrical resistivity measured by field survey at Samcheok City. A raster database composed of ground subsidence areas and electrical resistivity data was constructed for GIS. To analyze correlation between the two constructed raster datasets, we used a frequency ratio model. The results show that low and high electrical resistivity anomaly zones coincide with the existing subsidence areas. We infer that the high anomaly zone means saturated and low anomaly zone means vacant. It suggests that electrical resistivity might be a useful factor for analyzing ground subsidence hazard zone.

  • PDF

Monitoring of artificial infiltration using electrical resistivity method

  • Nakazato Hiroomi;Kuroda Seiichiro;Okuyama Takehiko;Takeuchi Mutsuo;Park Mikyung;Kim Hee Joon
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.362-369
    • /
    • 2003
  • A infiltration experiment of river water has been conducted to evaluate the applicability of electrical resistivity monitoring methods in an area containing gravelly deposits in Nagaoka, Japan. Apparent resistivity data, which are inverted to obtain the resistivity distribution, are measured with a newly developed system. This system can collect 490 data in an hour and be controlled with PC to store the data. Subsurface resistivity sections, which are obtained from two-dimensional nonlinear inversion of time-lapse apparent resistivity data, enable us to estimate the direction of the flow and the rate of infiltration. The infiltration rate is estimated to be $4.4{\times}10^4m/s$ in the early stage of the experiment when the infiltration process is dominant.

  • PDF

RF와 DC 스퍼터링에 의한 질화 텅스텐 박막의 비저항 특성 (The resistivity properties of tungsten nitride films deposited by RF and DC sputtering)

  • 이우선;정용호;유병수;김남오
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1994년도 추계학술대회 논문집
    • /
    • pp.160-163
    • /
    • 1994
  • Tungsten and Tungsten Nitride thin films deposited by RF and DC sputtering and the resistivity of these films was measured. We deposited tungsten and tungsten nitride films by RF and DC sputtering at various conditions and derived equations that determines the resistivity and sheet resistivity by stabilizing the basic theory. We investigated properties of the resistivity and sheet resistivity of theme films under various conditions like temperature of substrate, flow rate of the argon gas and content of nitrogen from nitrogen-argon mixtures

반도전 재료를 이용한 Resistivity grading 방식의 XLPE절연 전력케이블용 시험단말에 관한 연구 (A study on the application of testing termination for XLPE Power Cable by Resistivity Grading Method Using Semi-conductive material)

  • 이창영;신두성;;김동욱;박완기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.1105-1107
    • /
    • 1999
  • The purpose of termination for high voltage tests of XLPE power cable is to prevent flashover during the breakdown test of specimen as well as to withstand the specified voltage between its conductor and screen without failure. For easier treatment and simpler construction of testing termination, resistivity grading method using semi-conductive material was employed. Based on the fundamental theory, its failure characteristics by changing the resistivity of semi-conductive material on the insulation surface was investigated. With two layers construction by difference resistivity on their surfaces, much improved result than that of one resistivity was obtained through the experiment for MV cable.

  • PDF

북서 태평양의 반원양성 점토 퇴적물의 음파전달속도와 전기 비저항에 관한 연구 (Compressional Wave Velocity and Electrical Resistivity in Hemipelagic Clay-rich Sediment, Northwestern Pacific)

  • 김대철;김기현
    • 한국해양학회지
    • /
    • 제23권3호
    • /
    • pp.146-157
    • /
    • 1988
  • 북서 태평양에 분포하는 반 원양성 점토의 심해저 시추 코어를 이용한 공극율, 음파전달속도, 속도 비등방성, 전기비저항, 비저항 비등방성에 대한 성질이 측정 되었다. 음파속도와 비저항은 퇴적물 깊이에 따라 증가하고 반대로 공극율은 감소한다. 깊이에 따른 속도와 비저항의 비등방성의 변화양상은 거의 비슷하다. 수평방향으로 발달된 얇고 긴 공극과 일정한 방향성을 가지고 배열하는 점토광물이 속도의 비등방성의 원인이 될 수 있음이 제시되었다.

  • PDF

역전과 알고리즘(BP)을 이용한 대지저항률 추청 방법에 관한 연구 (A Study on Methodology of Soil Resistivity Estimation Using the BP)

  • 류보혁;위원석;김정훈
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제51권2호
    • /
    • pp.76-82
    • /
    • 2002
  • This paper presents the method of sail-resistivity estimation using the backpropagation(BP) neural network. Existing estimation programs are expensive, and their estimation methods need complex techniques and take much time. Also, those programs have not become well spreaded in Korea yet. Soil resistivity estimation method using BP algorithm has studied for the reason mentioned above. This paper suggests the method which differs from expensive program or graphic technology requiring many input stages, complicated calculation and professional knowledge. The equivalent earth resistivity can be presented immediately after inputting apparent resistivity through the personal computer with a simplified Program without many Processing stages. This program has the advantages of reasonable accuracy, rapid processing time and confident of anti users.

A Study on Electrical Resistivity Behaviors of PAN-based Carbon Nanofiber Webs

  • Park, Soo-Jin;Im, Se-Hyuk;Rhee, John-M.;Lee, Young-Seak
    • Carbon letters
    • /
    • 제8권1호
    • /
    • pp.43-48
    • /
    • 2007
  • The influences of various carbonization temperatures on electrical resistivity and morphologies of polyacrylonitrile (PAN)-based nanofiber webs were studied. The diameter size distribution and morphologies of the nanofiber webs were observed by a scanning electron microscope. The electrical resistivity behaviors of the webs were evaluated by a volume resistivity tester. From the results, the volume resistivity of the carbon webs was ranged from $5.1{\times}10^{-1}\;{\Omega}{\cdot}cm$ to $3.0{\times}10^{-2}\;{\Omega}{\cdot}cm$, and the average diameter of the fiber webs was varied in the range of 310 to 160 nm with increasing the carbonization temperature. These results could be explained that the graphitic region of carbon webs was formed after carbonization at high temperatures. And the amorphous structure of polymeric fiber webs was significantly changed to the graphitic crystalline, resulting in shrinking the size of fiber diameters.