• 제목/요약/키워드: Resistance value

검색결과 2,568건 처리시간 0.022초

$SF_6$ 가스차단기의 아크저항에 관한 연구 (A Study On The Arc Resistance of $SF_6$ Gas Circuit Breaker)

  • 정진교;이우영;김규탁
    • 전기학회논문지
    • /
    • 제56권9호
    • /
    • pp.1566-1570
    • /
    • 2007
  • [ $SF_6$ ] gas circuit breakers are widely used for short circuit current interruption in EHV(Extra High Voltage) or UHV(Ultra High Voltage) power systems. To develop $SF_6$ gas circuit breakers, the arc resistance value is necessary to compare experimental results to numerical ones. The arc resistance value can be obtained from a breaking test with a $SF_6$ gas circuit breaker. The direct testing or synthetic testing facility is widely used to verify the breaking ability for $SF_6$ gas circuit breakers. We employed the simplified synthetic testing facility to test a $SF_6$ gas circuit breaker prototype. The arc resistance characteristic was measured and calculated under the various experimental conditions. This arc resistance value can be used for verifying the numerical results from arc simulation in a circuit breakers.

CGS 잔골재를 사용한 콘크리트의 응결시간 추정시 듀로미터 사용 가능성 분석 (Estimation of Setting Time for Concrete Using CGS Fine Aggregate and Analysis of Durometer)

  • 이혁주;한준희;백승복;신용섭;한민철;한천구
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 추계 학술논문 발표대회
    • /
    • pp.118-119
    • /
    • 2019
  • In this study, we compared the proctor penetration resistance test value of the concrete using CGS for Fine Aggregate and the hardness value of the Durometer. The results are summarized as follows. 1) Surface finish The Durometer C type setting time measurement value was about 45 HD, and the hardness value of the Durometer D type was about 5HD. 2) The proctor penetration resistance test value and the hardness value of the Durometer are highly correlated and are expected to be easy to use.

  • PDF

터널 내화용 시멘트계 재료의 개발 및 성능 평가 (Development and Performance of Cementitious Materials for Fire Resistance of Tunnel)

  • 원종필;최석원;박찬기;박해균
    • 대한토목학회논문집
    • /
    • 제26권4C호
    • /
    • pp.265-273
    • /
    • 2006
  • 본 연구의 터널 내화용 시멘트계 재료의 역학적 특성 및 내화성능을 평가하는 것이다. 이와 같은 목적을 달성하기 위하여 본 연구의 과정은 세단계로 나눌 수 있다. 첫 번째 과정은 서로 다른 종류의 재료를 이용하여 내화시험을 실시한 후 기본 배합비를 결정하는 것이다. 두 번째 과정으로 기본 배합비의 성능을 평가하기 위하여 내화특성 시험을 실시하였다. 세 번째 과정으로 내화용 시멘트계 재료의 성능을 목표성능 및 기존 상용제품과 비교하였다. 개발된 내화용 시멘트계 재료가 목표값을 만족하면 연구를 멈추었고, 만족하지 못한다면 첫 번째 과정으로 돌아가 반복 시험을 실시하였다. 연구결과 개발된 제품 및 상용제품 모두 화재에 의한 폭렬이 발생하지 않았다. 또한 개발된 내화용 시멘트계 재료는 밀도가 큰 골재를 사용하여 우수한 압축강도, 휨강도 및 부착강도를 보여주었으며, 충분한 화재에 대한 저항성을 확보할 수 있었다.

탄소저항체에 대한 $Co^{60}$조사효과에 관한 연구 (Study on irradiation effect by $Co^{60}$ to the carbon resistor)

  • 지철근;조성욱
    • 전기의세계
    • /
    • 제22권4호
    • /
    • pp.7-10
    • /
    • 1973
  • The characteristics of all the instruments and materials used in atomic industry is changed due to radiation damages by the effects of radiation activities. In this study, when the Carbon Resistor, main element of electrical circuits, is irradiated by Gamma-Ray, variations in its electrical properties have been investigated. The following results are obtained: 1) The resistance value in Carbon Resistor is exponentially increased as the quantity of irradiation by Gamma-Ray is increased, but in case of more than 10$^{6}$ R/hr. of quantity of irradiation it has saturated-state value. 2) The rate of change inrestistance value has been independent on the intensity of Gamma-Ray source when Carbon Resistor is irradiated in the same quantity of irradiation. 3) The resistance value in irradiated Carbon Resistor has not been varied with elapse of time. 4) The more the distance from the Carbon Resistor to the Gamma-Ray source the more greatly the resistance value is decreased and that it has been shown that the more quantity of irradiation by Gamma-Ray, the greater the rate of decrease in resistance value. Through the above results it has been concluded that the measurement values obtained by the high-precision instruments in the radiation field have to be corrected with proper consideration to radiation damages.

  • PDF

패션성 향상을 위한 신발갑피용 고강도 면직물 개발 (Development of High-strength Cotton Fabrics for Upper of Shoes to Improve Fashionability)

  • 이재호
    • 한국의류산업학회지
    • /
    • 제21권2호
    • /
    • pp.203-208
    • /
    • 2019
  • This paper considers the moisture permeability and fashion in the upper fabrics of cotton fabric shoes woven into various tissues and properties measured to examine the use as upper fabrics. We measured the tissues of the manufactured upper fabric are 1/3 twill, $4{\times}4$ weft rib, Maya, Triple, Deformed twill design (DTD), Diamond tissues and tear strength, tensile strength, breaking elongation, stretching under load at 100N, stitch tear resistance, and fastness. In the case of $4{\times}4$ weft rib, the tear strength and tensile strength were excellent; however, the elongation and stitch tear resistance at 100N load were less than the standard value. DTD fabrics are characterized by physical properties in the warp direction that are superior to those in the weft direction; however, the tear strength and tensile strength in the weft direction are less than the standard value. The 1/3 twill fabrics showed high tensile strength value and stitch tear resistance value in the warp direction; however, toughness, the main property of the shoe upper, was below the standard value. Triple and diamond fabrics, which have a significant effect on the performance of the shoe upper fabric, also had less than the standard value of tear strength. Maya upper fabric for shoes has better properties than other upper fabrics except for the elongation at break, and the stitch tear resistance has a value of 178% in the warp direction and 214% in the weft direction compared to the standard value. Therefore, the Maya fabric showed the possibility of being used as an upper textile for shoes.

가상현실 환경에서의 다차원적 혁신저항 구조와 혁신 제품 사용의 결정요소 (A Multi-dimensional Structure for User Resistance with the Determinants of Innovative Product Use on Virtual Reality)

  • 박현정;신경식;최재원
    • 한국전자거래학회지
    • /
    • 제21권2호
    • /
    • pp.97-119
    • /
    • 2016
  • 가상현실 상황에서 모션인식 사용자 인터페이스는 사용자 경험의 현실감을 향상시킨다. 본 연구는 모션인식 인터페이스로 활용되는 제품인 '립모션'에 대한 잠재고객들의 혁신저항 및 수용 메커니즘을 지각된 위험 이론을 기반으로 연구하였다. 기존 혁신저항 및 제품 수용에 관련된 연구들은 지각된 위험의 결과 또는 지각된 가치가 수용의도에 미치는 영향을 단면적으로 다루어 왔다. 본 연구는 수용과 저항의 다차원적 관점을 기반으로 선행연구를 종합적으로 검토하여 지각된 위험 및 가치에 영향을 미치는 선행요인들을 제시하고 지각된 위험과 가치가 혁신저항에 미치는 복합적인 역학관계를 다루고자 하였다. 분석 결과, 기존의 수용 관점 모형에 포함되었던 선행요인들이 지각된 위험을 감소시킬 수 있고, 지각된 가치가 높으면 혁신저항이 감소한다는 점을 발견하였다.

올레인산 및 프로필렌글리콜이 피부의 전기적 성질에 미치는 영향 (The Effect of Oleic Acid and Propylene Glycol on the Electrical Properties of Skin)

  • 오승열
    • Journal of Pharmaceutical Investigation
    • /
    • 제24권4호
    • /
    • pp.281-287
    • /
    • 1994
  • The effects of oleic acid, propylene glycol and 5% (w/w) oleic acid in propylene glycol on the electrical properties of hairless mouse skin were studied and the results were compared. The complex electrical impedance was measured as a function of frequency, and resistance and capacitance were determined from the Nyquist plot. Immediately after the treatment with oleic acid, resistance was 145% of the pretreatment value. However it decreased with time and, after 20 hours, it was about 25% of its pretreatment value. Capacitance increased; immediately after the treatment, it was about 125% of pretreatment value and it seemed to increase slowly with time. When the skin was treated with propylene glycol, resistance decreased about 5O% and capacitance increased about 65%. Similar results were observed when the skin was treated with 5% (w/w) oleic acid in propylene glycol, except that the magnitude of resistance drop was much larger. Oleic acid acted synergistically with propylene glycol. Together with the flux data in the literature, the results obtained in this work indicate that electrical resistance is closely related to the permeability of drug molecules through the skin. The results are discussed in terms of the mechanism of action of these penetration enhancers. Overall, this work provided further mechanistic insight into the role of SC lipids in skin resistance and capacitance.

  • PDF

Factors Influencing Post-Adoption Resistance to Self-Order Kiosks at Fast-Food Restaurants: A Focus on the New-Silver Generation

  • Hwaran Lee;Eunkyung Kang;Kyung Young Lee;Minwoo Lee;Sung-Byung Yang
    • Journal of Smart Tourism
    • /
    • 제3권2호
    • /
    • pp.23-36
    • /
    • 2023
  • Due to the phenomenon of aging, a new consumer segment known as the "new-silver generation" is emerging. Unlike the previous silver generation, this generation possesses significant economic power and consuming willingness, attracting attention from consumer goods companies. However, both the new-silver generation and the elderly face challenges in adopting contactless or self-service technologies such as self-order kiosks, resulting in negative reactions. Therefore, this study aims to investigate the attitude and response of the newsilver generation towards kiosks, as well as the factors influencing their resistance to such technology. By applying theoretical perspectives from the innovation resistance model, technostress theory, and the value-based model, this study identifies influencing factors for innovation resistance among the new-silver generation when using contactless technologies implemented in fast-food restaurants. The findings indicate that a lower awareness of new technologies and services corresponds to decreased adoption resistance, while a higher perceived value leads to more positive behaviors and attitudes among the new-silver generation utilizing kiosks at fast-food restaurants.

혈청 농도가 다제내성 억제제 BIBW22의 nucleoside 수송에 미치는 영향 (Effect of Serum Concentration on Inhibition of Nucleoside Transport by Multidrug Resistance Inhibitor BIBW22)

  • 이동권
    • Biomolecules & Therapeutics
    • /
    • 제3권2호
    • /
    • pp.116-121
    • /
    • 1995
  • Some multidrug resistance inhibitors have been known to be influenced by the serum concentration. In this study, effect of serum concentration on inhibition of nucleoside transport by BIBW22, a new multidrug resistance inhibitor derived from dipyridamole (DPM), was studied. When 5% or 100% (v/v) of fetal bovine serum (FBS) was contained in the culture, DPM dose for which nucleoside transport was inhibited by 50% (lD$_{50}$) was 0.42 $\mu$M or 1.17 $\mu$M, respectively. BIBW22 also showed the same trend as DPM did in response to increase of FBS concentration. However, ID$_{50}$ value for DPM in the absence or presence of human plasma was 0.007 $\mu$M or 1.02 $\mu$M respectively showing 145 times increase of ID$_{50}$ value. ID$_{50}$ value for BIBW22 in the presence of human plasma was 0.028 $\mu$M showing only 5 times increase in ID$_{50}$ value. This result suggests that potency of BIBW22 was much less affected by the plasma concentration and BIBW22 could be a good candidate for a clinical use in multidrug resistance treatment.treatment.

  • PDF

전기콘센트의 사용환경과 전류값에 따른 열적특성 및 절연저항 분석 (Analysis of Thermal Characteristics and Insulation Resistance based on Usage Environment and Current Value of Electrical Socket Outlet)

  • 김경천;김두현;김성철
    • 한국안전학회지
    • /
    • 제34권5호
    • /
    • pp.22-30
    • /
    • 2019
  • In 2018, overload, overcurrent, insulation aging, and a contact failure caused 659 electric fires. There is almost no failure of electrical socket outlets during their manufacturing or installation period. After several months or several years, overload or overcurrent of electrical socket outlets leads to a contact failure or short circuit which causes an electric fire. Therefore, this paper analyzed for thermal characteristics based on a current value and the change in insulation resistance along with a temperature rise caused by electrical socket outlets and the state of laboratory use in workplaces. As a results, regarding the thermal characteristics based on the current value of each installation year, a temperature increase was related to a current value, an installation year, and whether the contact unit is corroded. Insulation resistance began to decrease when a temperature increased to a certain level. With a lapse of installation year, the temperature at which insulation resistance began to decrease was lowered. This paper can be applicable for the survey data about electrical socket outlet induced fire accidents and management guidelines.