• 대한소아치과학회지
• /
• 제33권2호
• /
• pp.165-172
• /
• 2006

오랜 기간동안 다양한 약제를 통한 직접 치수복조술이 시도되어 왔다. 그 중 가장 보편적으로 사용된 약제는 수산화칼슘이다. 하지만 유치에서 수산화칼슘을 이용한 직접 치수복조술의 성공률은 생활치수절단술에 비해 낮다고 보고되어 왔다. 수산화칼슘의 단점으로 인해 다른 치수복조제를 찾기 위한 많은 연구가 있었으며 최근 여러 연구가들은 치수복조제로 접착용 레진의 이용을 제안하였다. 그들은 노출된 치수에 접착용 레진이 적용되었을 때 임상적 증상이 없이 염증이나 치수괴사가 없다고 주장하였다. 이 연구의 목적은 유치에서 기계적으로 노출된 생활치수에 치수복조제로써 수산화칼슘과 접착용 레진을 적용하여 단 기간동안의 예후를 비교해 보고, 또한 각각의 직접 치수복조술을 시행한 유치에 있어 생리적인 치근흡수 유무에 따른 예후의 차이를 비교해보기 위함이다. 와동형성 중 기계적으로 치수가 노출되어 생활 치수인 유치 41개를 대상으로 하였다. 그중 접착용 레진으로 치수복조제로 사용한 치아 21개를 1군으로 하였고, 수산화칼슘을 이용한 치아 20개를 2군으로 하였다. 그리고 제 1군과 2군의 치아들은 치근단방사선 소견을 통해 생리적인 치근흡수의 유무여부에 따라 다시 세분되었다. 모든 치아는 복합 레진으로 수복하였으며, 시술 3개월 후 타진반응, 냉 검사, 전기치수검사 등의 치수 생활력검사와 치근단방사선 소견으로 성공여부를 판단하였다. 결과는 다음과 같다. 1. 1군과 2군 사이의 성공률에는 유의한 차이가 없었다. 2. 각 군에서 생리적인 치근흡수가 없는 유치보다 있는 유치에서 성공률이 현저히 높았다. 3. 전치와 구치사이의 성공률에는 유의한 차이가 없었다.

• 대한치과보철학회지
• /
• 제49권1호
• /
• pp.49-56
• /
• 2011

연구 목적: 최근 지르코니아가 전부도재관의 코어로 많이 사용되고 있다. 지르코니아와 레진 시멘트의 결합 강도를 높이기 위한 기계적, 화학적인 표면 처리 방법들이 연구되고 있다. 이 연구에서 여러 표면 처리 방법에 따른 지르코니아와 레진 시멘트의 전단결합강도를 알아보고자 한다. 연구 재료 및 방법: 80개의 지르코니아 (Lava, 3M ESPE, St. Paul, MN, USA) 시편과 80개의 지르코니아/알루미나 복합체 (Zirace, Acucera Co Inc, Korea) 시편을 디스크형태로 제작하여 에폭시레진에 매립하였다. 이들을 각각 4개의 군으로 나누어 $50\;{\mu}m$ $Al_2O_3$ sandblasting, $110\;{\mu}m$ $Al_2O_3$ sandblasting, $50\;{\mu}m$ $Al_2O_3$ sandblasting과 프라이머 (Z-PRIME Plus, Bisco Inc, Schaumburg, IL, USA) 사용, $110\;{\mu}m$ $Al_2O_3$ sandblasting과 프라이머 (Z-PRIME Plus) 사용 군으로 나누었다. 표면 처리한 지르코니아 표면에 2가지 레진 시멘 (Calibra, Panavia F)으로 접착하였다. 그 후 증류수 ($37^{\circ}C$)에 24시간 보관 후 전단 결합 강도 실험을 시행하였고, SEM을 사용하여 표면 처리한 표면과 전단강도 실험 후 파절양상을 관찰하였다. 결과: ANOVA분석에 따르면, 두 가지 종류의 시편 모두에서, 프라이머 (Z-PRIME Plus)를 사용하여 표면 처리한 군들이 전단 결합 강도가 높았다 (P < .05). 결론: 기계적 결합 강도와 함께 새로운 프라이머를 사용하는 것이 지르코니아와 레진 시멘트의 접착 강도를 증가시킨다.

• Restorative Dentistry and Endodontics
• /
• 제24권3호
• /
• pp.465-472
• /
• 1999

The aim of this study was to determine the shear bond properties of four dentin bonding systems to internal cervical dentin, and to investigate the effect of the pretreatment for removing smear layer and position of dentin on shear bond strength of dentin bonding agents. The materials tested in this study were consisted of four commercially available dentin bonding systems[Allbond 2(AB), Clearfil Linerbond 2(CL), Optibond FL(OP), Scotchbond Multi-purpose(SB)], a restorative light-cured composite resin[Z100]J and a chelating agent[RC-prep(RC)]. Fifty-six freshly extracted human molars were used in this study. Dentin specimens were prepared by first cutting the root of the tooth 1mm below the cementoenamel junction with a diamond bur in a high speed handpiece under air-water coolant, and then removing occlusal part at pulp horn level by means of a second parallel section, The root canal areas were exposed by means of cutting the dent in specimens perpendicular to the root axis. Dentin specimens were randomly assigned to two groups(pretreated group, not-pretreated group) based on the pretreatment method of dentin surface. In pretreated group, RC was applied to dentin surface for 1minute and then rinsed with NaOCl. In not-pretreated group, dentin surface was rinsed with saline Each groups were subdevided into four groups according to dentin bonding systems. Four dentin bonding systems and a restorative resin were applied according to the directions of manufacturer. The dentin-resin specimens were embedded in a cold cure acrylic resin, and were cut with a low speed diamond saw to the dimension of $1{\times}1mm$. The cut specimens were divided into three groups according to the position of internal cervical dentin. The shear bond properties of dentin-resin specimens were measured with Universal testing machine (Zwick, 020, Germany) with the cross head speed of 0.5mm/min. From this experiment. the following results were obtained : 1. In case of shear bond strength, there was no significant difference among dentin bonding systems in not-pretreated groups, whereas in pretreated groups, the shear bond strengths of AB and of SB were statistically significantly higher than those of CL and of OP. 2. The shear bond strengths of AB and of SB in pretreated groups were significantly higher than those in not-pretreated groups. 3. The shear bond strengths of radicular layer of OP were higher than those of occlusal layer of OP in not-pretreated groups, and of AB in pretreated groups. The shear bond strengths of radicular layer of AB and of CL in not-pretreated groups were higher than those in pretreated group.

• 한국추진공학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2017

항공기 엔진 배기노즐 표면으로부터 적외선 방사를 낮추기 위한 연구의 일환으로 스테인리스 스틸 표면을 구리입자/메타 아라미드 수지 복합재료로 도포하여 $320^{\circ}C$에서 적외선 방사율을 측정하였다. 일반적인 충전제 입자 바인더 합성수지의 경우 $300^{\circ}C$이전에서 대부분 열분해를 일으키지만 메타 아라미드 수지는 $320^{\circ}C$에서도 열안정성을 보여 구리입자 분산 내열성 매트릭스 수지로 적합한 것으로 나타났다. 본 연구에서는 첨가한 구리입자 함량은 부피기준으로 0 ~ 70% 까지 변화시켰다. 구리입자/메타아라미드 복합재료 수지로 도포된 시편은 $320^{\circ}C$에서 적외선 방사율 측정 실험 후에 접착력이 우수하였다. 그리고 구리입자 함량이 부피 기준으로 50%인 구리입자/메타 아라미드 수지를 도포함으로써 시편의 $320^{\circ}C$ 적외선 방사율을 0.6 까지 낮출 수 있었다.

• 한국염색가공학회지
• /
• 제4권3호
• /
• pp.116-121
• /
• 1992

This paper is on for a material to replace the petroleum-based resins used as adhesives for the fiber in rubber composite materials. The study limited to the reaction properties of tannin with formaldehyde. Tannin-formaldehyde(TF) reactions were carried out in aqueous media. Rates of reaction were strongly dependent on concentration, temperature, pH, and the mole ratio of tannin to formaldehyde. Viscosities of reaction mixtures were followed up to gelation. The reactivity of tannin-formaldehyde resins was greater than that of resorcinol-formaldehyde resins. To formulate an adhesive, a styrene-butadiene-vinyl pyridine terpolymer latex(L) was added to the TF. This preliminary results suggest that the condensed tannins have considerable promise as substitutes for resorcinol used in resin formulation for bonding of fiber to rubber.

• 한국세라믹학회지
• /
• 제33권8호
• /
• pp.935-941
• /
• 1996

Two-dimensional carbon/carbon preforms made of PAN-based carbon yarn and phenolic resin were densified with pyrolysis of propane by pulse chemical vapor infiltration where repeated the cycle of gas introduction residence and evacuation. Maximim density increment was 14% when infiltration temperature and time were 100$0^{\circ}C$ and 21.25 hrs respectively. The distribution of deposits of pyrocarbon by this process has been occurred uniformly in the bottom middle and top of carbon/carbon composite preform Pulse CVI with residence is most effective in increasing density and shortening infiltration time among isothermal CVI and pulse CVI with and without residence.

• 대한심미치과학회지
• /
• 제12권2호
• /
• pp.31-38
• /
• 2003

Amelogenesis imperfecta patients suffered common clinical problems of poor esthetics, teeth sensitivity, and loss of occlusal vertical dimension. Amelogenesis imperfecta is a group of inherited disorders primarily affecting dental enamel. Variants of amelogenesis imperfecta generally classified hypoplastic, hypocalcified, or hypomaturation types based on the primary enamel defects. The mildest problems were found in the pitted hypoplastic type whereas the most severe problems were encountered in the hypocalcified type amelogenesis imperfecta. Management stragies include composite resin veneer and jacket crowns for anterior teeth as well as steel crowns for posterior teeth. Knowledge of the clinical features and dental complications of each variants if amelogenesis impecta helps in the diagnosis of the condition and allows institution of early preventive measures. The objective of this paper is to provide a review of the current concepts of the wide spectrum of etiological factors involved in the pathogenesis of this significance clinical entity in the primary dentition.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.285-286
• /
• 2008

Recently, epoxy based nano-composites are being increasingly investigated for their electrical properties, since the introduction of nano fillers demonstrate several advantages in their properties when compared with the similar properties obtained for epoxy systems with micrometer sized fillers. We calculated scale and shape parameter using dielectric strength. In this paper, it is investigated that the allowable' breakdown probability of specimens is stable at some value using Weibull statistics. Therefore we found that breakdown probability of specimens is stable until 20 [%].

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.38-50
• /
• 1996

Recently carbon fiber reinforced plastic (CFRP) has been used structural materials in corrosive environment such as for water, chemical tank and pipes. However, mechanical properties of such materials may be change when CFRP and exposed to corrosive environment for long periods of time. The degradation behavior of carbon fiber/epoxy resin composite material in distilled water is investigated using acoustic emission (AE) technique, Fracture toughness tests are performed on the compact tension specimens that are pilled by two types of $[O_2/9O_2]_{3s}$ and $[O/9O]_6s$. During the testes, AE test was carried out to monitor the damage of CFRP by moisture absorption. The data was treated by 2-parameter Weibull distribution and the fracture surface was observed by scanning electron microscope.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2003년도 제120회 추계학술대회 제 5차 한ㆍ일 치과보존학회 공동학술대회
• /
• pp.609-609
• /
• 2003

I. Objectives The purpose of this study was to evaluate the effect of adhesive property on microtensile bond strength and to determine the failure mode. II. Materials and Methods Flat occlusal dentin surfaces were prepared using low-speed diamond saw. The dentin was etched with 37% phosphoric acid. The following adhesives were applied to the etched dentin according to manufacturer's directions；Scotchbond Multi-Purpose in group 1, Primer＆Bond NT in group 2, Scotchbond Multi-Purpose followed by Tetric-flow in group 3. After adhesive application, a cylinder of resin-based composite was built up the occlusal surface.(omitted)