• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.151-160
• /
• 2006

This study was conducted to investigate the genetic characteristics of growth stages in Hanwoo, to provide useful information in farm management decisions. Data were taken from the nucleus herds of three farms, Namwon, Daegwalyong and Seosan, comprising 27,647 cows, 14,744 bulls, and 1,290 steers in between 1980 and 2004. According to the growth curve by year, the residuals for cows and bulls were 68.49 and 54.29, respectively, under the Gompertz model. The values were lower than in other years. Parameters, A, b and k were estimated as 423.6±5.8, 2.387±0.064 and 0.0908±0.0033 in cows and 823.3±15.3, 3.584±0.070, 0.1139±0.0032 in bulls, respectively. The fitness was higher under the Gompertz model than under the logistic model: monthly and daily estimation for cows were 379.3±7.509, 2.499±0.057, 0.114±0.0045 and 367.1±1.9003, 2.3983±0.012, 0.004±0.00003, respectively. Estimated residual mean squares were 31.85 and 998.4 in their respective models. Monthly and daily estimation of bulls were 834.6±22.00, 3.319±0.062, 0.104±0.0037 and 796.0±6.128, 3.184±0.014, 0.003±0.00003, respectively. Estimated residual mean square were 66.18 and 2106.5. Monthly and daily estimation of steers were 1049.1±144.2, 3.024±0.008, 0.067±0.0096 and 1505.1±176.6, 2.997±0.067, 0.001±0.0001, relatively. Squares, 186.0 and 1119.1. In terms of growth characteristic estimated by Gompertz model, body weight for cows and bulls were 139.53kg and 307.03kg, and the daily gains were 0.52kg and 1.04kg, respectively. Body weight for steers was 385.94kg at the inflection point. Body weight gain was 0.84kg in both models. Our results showed that cows had lower mature weight and daily weight gain, and reached the inflection point earlier than bulls or steers.

• Clean Technology
• /
• v.17 no.4
• /
• pp.306-313
• /
• 2011

Flux or solder is used in soldering process for manufacturing electronic parts such as printed circuit boards (PCB). After soldering process, residual flux and solder paste on the parts should be removed since their residuals could cause performance degradation or failure of parts due to their corrosion and electric leakage. Ozone depletion substances such as 1,1,1- trichloroethane (TCE) and HCFC-141b have widely been using for removal of residual flux and solder paste after soldering process In manufacturing of electronic parts until now. In this study, non-aqueous cleaning agents without flash point were developed and applied to industrial field for replacement of cleaning agents with ozone depletion. In order to develop non-aqueous cleaning agents without ethers, esters, fluoride- type solvents. And their physical properties and cleaning abilities were evaluated, and they were applied to industrial fields for cleaning of flux and solder on the PCB. And vacuum distillation apparatus were operated to determine their operating conditions and recycling yields for recycling of used cleaning agents formulated in this study. As a result of physical properties measurement of our formulated cleaning agents, they were expected to have good wetting and penetrating power since their surface tensions were relatively low as 18.0~20.4 dyne/$cm^2$ and their wetting indices are relatively large. And some cleaning agents holding fluoride-type solvents as their components did not have any flash point and they seemed to be safe in their handling and storage. The cleaning experimental results showed that some cleaning agents were better in their cleaning of flux and solder paste than 1,1,1-TCE and HCFC-141b. And industrial application results of the formulated cleaning agents for cleaning PCB indicated that they can be applicable to industry due to their good cleaning capability in comparison with HCFC-141b. The recycling experiments of the used formulated cleaning agents through a vacuum distillation apparatus also showed that their 91.9~97.5% could be recycled with its proper operating conditions.

• Geophysics and Geophysical Exploration
• /
• v.10 no.3
• /
• pp.183-190
• /
• 2007

The site effects of seismic stations were evaluated by conducting a simultaneous inversion of the stochastic point-source ground-motion model (STGM model; Boore, 2003) parameters based on the accumulated dataset of horizontal shear-wave Fourier spectra. A model parameter $K_0$ and frequency-dependent site amplification function A(f) were used to express the site effects. Once after a H/V ratio of the Fourier spectra was used as an initial estimate of A(f) for the inversion, the final A(f) which is considered to be the result of combined effect of the crustal amplification and loca lsite effects was calculated by averaging the log residuals at the site from the inversion and adding the mean log residual to the H/V ratio. The seismic stations were classified into five classes according to $logA_{1-10}^{max}$(f), the maximum level of the site amplification function in the range of 1 Hz < f < 10 Hz, i.e., A: $logA_{1-10}^{max}$(f) < 0.2, B: 0.2 $\leq$ $logA_{1-10}^{max}$(f) < 0.4, C: 0.4 $\leq$ $logA_{1-10}^{max}$(f) < 0.6, D: 0.6 $\leq$ $logA_{1-10}^{max}$(f) < 0.8, E: 0.8 $\leq$ $logA_{1-10}^{max}$(f). Implication of the classified result was supported by observing a shift of the dominant frequency of average A(f) for each classified stations as the class changes. Change of site classes after moving seismic stations to a better site condition was successfully described by the result of the station classification. In addition, the observed PGA (Peak Ground Acceleration)-values for two recent moderate earthquakes were well classified according to the proposed station classes.

• Korean Journal of Ichthyology
• /
• v.26 no.4
• /
• pp.310-321
• /
• 2014

Change in fish species composition after the Hebei Spirit oil spill in December 2007 off Taean were determined by analysis of samples collected in Mailpo beach, 10 km south from the oil spill site and polluted by the crude oil. Fish samples were collected by a beach seine in the shallow water at Malipo beach during the low tide of the new moon from February 2008 to December 2009. Five seine hauls were made during the day and the night in each sampling time. Monthly day and night samples did not show the significant differences in species composition. A total of 21 species, 1,032 individuals and 6,544 g of fish were collected in 2008, and 31 species, 4,206 individuals and 35,659 g of fish in 2009. The species collected were composed of the small-sized fish or juveniles. Abundant fishes were the resident species in coastal water, and the migrants were low in abundance. Among the fish occurred, Chelon haematochelius, Sebastes schlegelii, Takifugu niphobles and Pleuronectes yokohamae were predominated in abundance of both years. Monthly fish abundance and species diversity in 2008 were significantly lower than those in 2009. A few number of resident fish were collected from February to June 2008 showing the lowest in May 2008, and fish abundance increased from July 2008. The number of species and abundance of fish in 2009 were increased in spring as the temperature raised, showed a peak in summer and decreased in autumn. This monthly variation in fish species composition and abundance was similar to those in the non-polluted water in other temperate waters. Low fish abundance during several months after oil spill was considered to be related to the residual oil in the water and habitat disturbance due to oil cleaning activity in the beach. Monthly fish species compositions after September 2008 were similar to those of 2009 suggested that the impact on the shallow water fish by the oil residuals was not too significant at least to the fish species composition after September 2008.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.123-131
• /
• 2012

This study was conducted to estimate correlation structure between Hanwoo steer growth traits - body weights at 6 month, 12 month, 18 month and 24 month of age, average daily gain, carcass traits, body size traits at 18 months of age. Hanwoo progeny test data(body weight, body size traits) collected from 2004 to 2008 on a total of 1,838 steers at Hanwoo Improvement Main Center(NACF) were analyzed. Carcass traits were used to score the 24 months of age and slaughter. Correlation analyses were performed with observed scales of the traits and with residuals considering fixed effects in generalized linear models. The correlated coefficient estimated between live weight at slaughter(24 months of age) and cold carcass weight was high at 0.92. Correlation between beef yield index values and backfat thickness was estimated to be high and negative at -0.92. Hip height and wither height was found to be highly correlated(0.89). Chest width and chest depth also was found to be highly correlated at 0.73. Rump width was highly correlated with chest depth(0.75) and chest width(0.74). Correlation between pelvic width and rump width was estimated to be 0.74. Hipbone width was shown to be highly correlated with chest depth(0.73), chest width(0.70), rump width(0.75), or pelvic width(0.75). Correlation between wither height and carcass weight was 0.48 in observed scale. Chest girth was phenotyically (residual correlation) correlated with carcass weight (0.51), the estimates of which were some higher than than with the other carcass traits. This study will be utilized for Hanwoo Steers genetic evaluation.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.4
• /
• pp.353-358
• /
• 2021

BACKGROUND: Prochloraz has been widely used as an imidazole fungicide on fruits and vegetables in Korea. Analytical approaches to evaluate prochloraz residues in herbal medicine are required for their safety management. In this study, we developed a GC-ECD method for quantitative determination of prochloraz in Platycodi Radix. The metabolite 2,4,6-trichlorophenol (2,4,6-T) was used as a target compound to evaluate total prochloraz residues as it is categorized to a representative residue definition of prochloraz. All residues containing 2,4,6-T were converted to 2,4,6-T and subjected to GC-ECD. METHODS AND RESULTS: In order to verify the applicability, the method was optimized for determining prochloraz and it metabolite 2,4,6-T in Platycodi Radix. Prochloraz and its metabolite 2,4,6-T residuals were extracted using acetone. The extract was diluted with and partitioned directly into dichloromethane to remove polar co-extractives in the aqueous phase. The extract was decomposed to 2,4,6-T, and then the partitioned ion-associate was finally purified by optimized aminopropyl solid-phase extraction (SPE). The limits of quantitation of the method (MLOQs) were 0.04 mg/kg and 0.02 mg/kg, respectively for prochloraz and 2,4,6-T, considering the maximum residue level (MRL) of prochloraz as 0.05 mg/kg in Platycodi Radix. Recovery tests were carried out at two levels of concentration (MLOQ, 10 MLOQ) and resulted in good recoveries (82.1-89.7%). Good reproducibilities were obtained (coefficient of variation < 2.8%), and the linearities of calibration curves were reasonable (r² > 0.9986) in the range of 0.005-0.5 ㎍/mL. CONCLUSION(S): The method developed in this study was successfully validated to meet the guidelines required for quantitative determination of pesticides in herbal medicine. Thus, the method could be useful to monitor prochloraz institutionally in herbal medicine.

• Journal of Korean Society of Forest Science
• /
• v.110 no.4
• /
• pp.648-657
• /
• 2021

This study was conducted to estimate the volume growth by forest type and major species using the national forest resource inventory and to predict the final age of maturity by deriving the mean annual increment (MAI) and the current annual increment (CAI). We estimated the volume growth using the Chapman-Richards model. In the volume estimation equations by forest type, coniferous forests exhibited the highest growth. According to the estimation formula for each major species, Larix kaempferi will grow the highest among coniferous tree species and Quercus mongolica among broad-leaved tree species. And these estimation formulas showed that the fitness index was generally low, such as 0.32 for L. kaempferi and 0.21 for Quercus variabilis. In the analysis of residual amount, which indicates the applicability of the volume estimation formula, the estimates of the estimation formula tended to be underestimated in about 30 years or more, but most of the residuals were evenly distributed around zero. Therefore, these estimation formulas have no difficulty estimating the volume of actual forest species in Korea. The maximum age attained by calculating MAI was 34 years for P. densiflora, 35 years for L. kaempferi, and 31 years for P. rigida among coniferous tree species. In broad-leaved tree species, we discovered that the maximum age was 32 years for Q. variabilis, 30 years for Q. acutissima, and 29 years for Q. mongolica. We calculated MAI and CAI to detect the point at which these two curves intersected. This point was defined by the maximum volume harvesting age. These results revealed no significant difference between the current standard cutting age in public and private forests recommended by the Korea Forest Service, supporting the reliability of forestry policy data.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.477-483
• /
• 2020

We constructed a stand yield table for Chamaecyparis obtusa based on data from an actual forest. The previous stand yield table had a number of disadvantages because it was based on actual forest information. In the present study we used data from more than 200 sampling plots in a stand of Chamaecyparis obtusa. The analysis included theestimation, recovery and prediction of the distribution of values for diameter at breast height (DBH), and the result is a valuable process for the preparation ofstand yield tables. The DBH distribution model uses a Weibull function, and the site index (base age: 30 years), the standard for assessing forest productivity, was derived using the Chapman-Richards formula. Several estimation formulas for the preparation of the stand yield table were considered for the fitness index, and the optimal formula was chosen. The analysis shows that the site index is in the range of 10 to 18 in the Chamaecyparis obtusa stand. The estimated stand volume of each sample plot was found to have an accuracy of 62%. According to the residuals analysis, the stands showed even distribution around zero, which indicates that the results are useful in the field. Comparing the table constructed in this study to the existing stand yield table, we found that our table yielded comparatively higher values for growth. This is probably because the existing analysis data used a small amount of research data that did not properly reflect. We hope that the stand yield table of Chamaecyparis obtusa, a representative species of southern regions, will be widely used for forest management. As these forests stabilize and growth progresses, we plan to construct an additional yield table applicable to the production of developed stands.

• Analytical Science and Technology
• /
• v.35 no.3
• /
• pp.136-142
• /
• 2022

According to media reports, the carcasses of euthanized abandoned dogs were processed at high temperature and pressure to make powder, and then used as feed materials (meat and bone meal), raising the possibility of residuals in the feed of the anesthetic ketamine and dexmedetomidine used for euthanasia. Therefore, a simultaneous analysis method using QuEChERS combined with high-performance liquid chromatography coupled with electrospray ionization tandem mass spectrometry was developed for rapid residue analysis. The method developed in this study exhibited linearity of 0.999 and higher. Selectivity was evaluated by analyzing blank and spiked samples at the limit of quantification. The MRM chromatograms of blank samples were compared with those of spiked samples with the analyte, and there were no interferences at the respective retention times of ketamine and dexmedetomidine. The detection and quantitation limits of the instrument were 0.6 ㎍/L and 2 ㎍/L, respectively. The limit of quantitation for the method was 10 ㎍/kg. The results of the recovery test on meat and bone meal, meat meal, and pet food showed ketamine in the range of 80.48-98.63 % with less than 5.00 % RSD, and dexmedetomidine in the range of 72.75-93.00 % with less than 4.83 % RSD. As a result of collecting and analyzing six feeds, such as meat and bone meal, prepared at the time the raw material was distributed, 10.8 ㎍/kg of ketamine was detected in one sample of meat and bone meal, while dexmedetomidine was found to have a concentration below the limit of quantitation. It was confirmed that the detected sample was distributed before the safety issue was known, and thereafter, all the meat and bone meal made with the carcasses of euthanized abandoned dogs was recalled and completely discarded. To ensure the safety of the meat and bone meal, 32 samples of the meat and bone meal as well as compound feed were collected, and additional residue investigations were conducted for ketamine and dexmedetomidine. As a result of the analysis, no component was detected. However, through this investigation, it was confirmed that some animal drugs, such as anesthetics, can remain without decomposition even at high temperature and pressure; therefore, there is a need for further investigation of other potentially hazardous substances not controlled in the feed.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.622-629
• /
• 2022

The study aim was to derive a stem taper equation for Phyllostachys pubescens, a type of bamboo in South Korea, and to develop a stem volume table. To derive the stem taper equation, three stem taper models (Max & Burkhart, Kozak, and Lee) were used. Since bamboo stalks are hollow because of its woody characteristics, the outer and inner diameters of the tree were calculated, and connecting them enabled estimating the tree curves. The results of the three equations for estimating the outer and inner diameters led to selection of the Kozak model for determining the optimal stem taper because it had the highest fitness index and lowest error and bias. We used the Kozak model to estimate the diameter of Phyllostachys pubescens by stem height, which proved optimal, and drew the stem curve. After checking the residual degree in the stem taper equation, all residuals were distributed around "0", which proved the suitability of the equation. To calculate the stem volume of Phyllostachys pubescens, a rotating cube was created by rotating the stem curve with the outer diameter at 360°, and the volume was calculated by applying Smalian's method. The volume of Phyllostachys pubescens was calculated by deducting the inner diameter calculated volume from the outer diameter calculated volume. The volume of Phyllostachys pubescens was only 20~30% of the volume of Larix kaempferi, which is a general species. However, considering the current trees/ha of Phyllostachys pubescens and the amount of bamboo shoots generated every year, the individual tree volume was predicted to be small, but the volume/ha was not very different or perhaps more. The significance of this study is the stem taper equation and stem volume table for Phyllostachys pubescens developed for the first time in South Korea. The results are expected to be used as basic data for bamboo trading that is in increasing public and industrial demand and carbon absorption estimation.