• 제목/요약/키워드: Residual water content

검색결과 188건 처리시간 0.031초

Fermentation Quality of Italian Ryegrass (Lolium multiflorum Lam.) Silages Treated with Encapsulated-glucose, Glucose, Sorbic Acid and Pre-fermented Juices

  • Shao, Tao;Zhanga, L.;Shimojo, M.;Masuda, Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제20권11호
    • /
    • pp.1699-1704
    • /
    • 2007
  • This experiment was carried out to evaluate the effects of adding encapsulated-glucose, glucose, sorbic acid or prefermented juice of epiphytic lactic acid bacteria (FJLB) on the fermentation quality and residual mono- and disaccharide composition of Italian ryegrass (Lolium multiflorum Lam) silages. The additive treatments were as follows: (1) control (no addition), (2) encapsulated-glucose addition at 0.5% for glucose, (3) glucose addition at 1%, (4) sorbic acid addition at 0.1%, (5) FJLB addition at a theoretical application rate of $2.67{\times}10^5$ CFU (colony forming unit) $g^{-1}$, on a fresh weight basis of Italian ryegrass. Although control and encapsulated-glucose treatments had higher contents of butyric acid (33.45, 21.50 g $kg^{-1}$ DM) and ammonia-N/Total nitrogen (114.91, 87.01 g $kg^{-1}$) as compared with the other treated silages, the fermentation in all silages was clearly dominated by lactic acid. This was well indicated by the low pH (4.38-3.59), and high lactic acid/acetic acid (4.39-22.97) and lactic acid content (46.85-121.76 g $kg^{-1}$ DM). Encapsulated-0.5% glucose and glucose addition increased lactic acid/acetic acid, and significantly (p<0.05) decreased ammonia-N/total nitrogen, and the contents of butyric acid and total volatile fatty acids (VFAs) as compared with the control. However, there were higher butyric acid and lower residual mono-and di-saccharides on the two treatments as compared with sorbic acid and FJLB addition, and their utilization efficiency of water soluble carbohydrates (WSC) was lower than that of both sorbic acid and FJLB additions. Sorbic acid addition showed the lowest content of ethanol and ammonia-N/total nitrogen, and the highest content of residual fructose and total mono-and disaccharides as well as the higher lactic acid/acetic acid value. Sorbic acid addition decreased the loss of mono-and disaccharides, and inhibited the activity of clostridial and other undesirable bacteria, and greatly increased the utilization efficiency of fermentable substrates by epiphytic LAB. FJLB addition had the lowest pH value and the highest lactic acid content among all additive treatments, with the most intensive lactic acid fermentation occurring in FJLB treated silage. This resulted in the faster accumulation of lactic acid and faster pH reduction. Sorbic acid and FJLB addition depressed clostridia or other undesirable bacterial fermentation which decreased the WSC loss and saved the fermentable substrate for lactic acid fermentation.

동절기 댐저수지 수색변동에 영향을 미치는 인자 및 원인물질 분석 (Analysis of Origin Matter of Blackish Water in Dam Reservoir During Winter)

  • 이요상;신현상;이혜숙;박재충
    • 환경영향평가
    • /
    • 제16권1호
    • /
    • pp.69-77
    • /
    • 2007
  • This study has been conducted to assess blackish-water phenomena in Dam reservoir. To searching for the reason, we survey physical changes in reservoir and analyze metal and organic content in particulate materials and water. The blackish-water phenomena in lake A are occurred with turbidity increases in turnover season irregularly. It was reported on 6 Jan. 2005 weakly and the water column mixed with 35~40m depth and water temperature shows $7^{\circ}C$. The turbidity of AD and AM site increased up to 20NTU. Especially, AN site shows 27NTU, such a result makes that Dam manager conclude it to blackish-water phenomena. The results of sequential extraction analysis show that over 80% of Al, Cr and Fe is existed in residual form in sediment. On the other hand, the most part of Mn shows exchangeable and carbonates form, which have a good possibility of release to water column. Mn contents in pore waters of the sediment samples are also found to be ~4 times higher than Fe contents. The metal contents in pore water of different dam sites are in order of AN (Fe: 9.98, Mn: 40.6) > AD(8.33, 37.5) > DD(1.91, 2.55). According to the results of extracted organic materials from sediment, humic substances is occupied with over 85% in total organic carbon including 23~45% of humic acid (HA) and 0.9~8.5% of fulvic acid (FA). However, HA content in pore water is not detectable while FA contents, acid-soluble humic fractions is higher than that of sediment(10~15%). which indicating that FA is a main humic components affecting water color. The color unit per DOC of FA in pore waters of different dam sites are found to be higher in lake A than lake D. From the results, it could be suggested that blackish-water phenomena of lake A are mainly arise from higher concentration of Mn and water soluble organic fractions (e.g., FA) released from sediments as well as the strength of turnover in Dam reservoir.

해수용 기준전극 개발을 위한 겔 타입 내부전해질 제조 및 잔류염소 측정장치에의 적용 (Fabrication of Gel-type Electrolyte for the Development of Reference Electrode for Sea Water and Application to Measuring Equipment for Total Residual Oxidants)

  • 김유진;이해돈;김대원
    • 공업화학
    • /
    • 제28권2호
    • /
    • pp.153-157
    • /
    • 2017
  • Hydroxyethyl-cellulose (HEC) 함량별로 겔 타입 내부전해질을 제작하여 이온전도도와 내구성 측정 실험을 수행하였다. 이온전도도 측정결과 HEC 함량이 증가할수록 이온전도도가 감소하여 12% 함량의 겔 타입 내부전해질은 기준전극에 적용이 어려울 것으로 판단하였다. HEC 함량별 내구성 실험결과, HEC의 함량이 감소할수록 carrier density가 증가하여 다공성 막을 통해 유출되는 전해질(KCl)의 양이 증가하였다. 따라서 선박평형수 처리장치와 같이 장시간 사용하기 위해 겔 타입 내부전해질을 HEC 10%로 선정하였다. HEC 10%의 겔 타입 내부전해질을 이용하여 기준전극과 TRO (total residual oxidants) 센서를 제작하여 TRO 분리능 실험을 수행하였다. TRO 센서에 50 mV의 전위를 30 s 동안 동일하게 인가하여 전류변화를 비교한 결과 0.2~30 PSU 조건에서 0~15 mg/L의 TRO 농도가 분리됨을 확인하였다. 따라서 HEC를 이용한 겔 타입 내부전해질을 TRO 센서에 적용할 수 있으며, 이를 이용하여 담수뿐만 아니라 해수 조건에서 TRO를 측정할 수 있음을 확인하였다.

감 착즙액 첨가량과 가수량에 따른 감막걸리의 특성 (Characteristics Of Persimmon Makgeolli Based On The Amount Of Water And Persimmon Juice Added)

  • 권예슬;서예진;강주연;최현진;최한석
    • 현장농수산연구지
    • /
    • 제25권4호
    • /
    • pp.158-164
    • /
    • 2024
  • With the steady growth in the scale of the domestic traditional liquor industry, the interest in makgeolli has also been increasing. As the demand for makgeolli increases, interest in manufacturing differentiated makgeolli by adding additional raw materials such as fruits is increasing. In this study, makgeolli with low storage persimmon juice was manufactured, and the sweet taste of persimmon was imparted without adding sweeteners. Unsweetened, high-quality persimmon makgeolli with an alcohol content of 15% or more was manufactured and its quality characteristics were analyzed. Yeast was selected after producing fermented yeast by treating domestic isolated yeast and commercial yeast. Upon producing fermented yeast, persimmon makgeolli was manufactured by varying the amount of persimmon juice added to the fermented yeast. As a result of analyzing the quality characteristics of persimmon makgeolli, the pH was 4.02-4.25, the total acid (citric acid, %) was 0.30-0.43, the amino acidity (glycine, %) range was 0.05-0.15, and the alcohol content (%) was 15.64-18.48.(p<0.05). Reducing sugar (%) was 1.82-12.68 and total sugar (%) was 1.41-10.42, exhibiting a tendency to increase as the amount of reducing sugar and total sugar and the amount of juice added increased (p<0.05). Considering the sensory characteristics, a sample with 50% persimmon juice added showed a significantly higher residual sugar content, and the residual sugar content had a positive effect on the sensory characteristics. Therefore, 50% persimmon juice was added when making persimmon makgeolli. It is suitable for high-quality, non-sweetened persimmon makgeolli that preserves the taste of persimmon, which suits the consumers'taste.

Recovery of ultrafine particles from Chemical-Mechanical Polishing wastewater discharged by the semiconductor industry

  • Tu, Chia-Wei;Wen, Shaw-Bing;Dahtong Ray;Shen, Yun-Hwei
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
    • /
    • pp.715-718
    • /
    • 2001
  • This study uses traditional alum coagulation and sedimentation process to treat CMP wastewater from cleaning after polishing. The primary goal is to successfully recycle both solid fines and water for semiconductor manufacturing. Results indicated that CMP wastewater may be successfully treated to recover clean water and fine particles by alum coagulation. The optimum operating conditions for coagulation are as fellowing: alum dosage of 10 ppm, pH at 5, rapid mixing speed at 800 rpm, 5 min rapid mixing time, and long slow mixing time. The treated water with low turbidity and an average residual aluminum ion concentration of 0.23 ppm may be considered for reuse. The settled sludge after alum coagulation contains mainly SiO$_2$particle with a minor content of aluminum (1.7 wt%) may be considered as raw materials for glass and ceramic industry.

  • PDF

Improvement of Absorption Performances of Superabsorbent Hydrogel Nanocomposites Using Clay Mineral

  • Kim, Dong Hyun
    • Elastomers and Composites
    • /
    • 제54권3호
    • /
    • pp.201-208
    • /
    • 2019
  • Superabsorbent hydrogel (SAH) is a lightly crosslinked hydrophilic functional polymer material comprising a flexible chain structure, which can absorb and retain high amounts of water or aqueous fluids even under high pressure. Therefore, it is important to improve their characteristics such as absorption performance, residual monomer content, and water permeability. SAH nanocomposites were prepared using clay mineral as an inorganic filler and the influence of post-treatment processes such as quenching and aging process on their properties was studied. In addition, surface-crosslinking process was applied to improve the absorption performance associated with mechanical properties and water permeability. The structure of the SAH was characterized using attenuated total reflectance Fourier transform infrared spectroscopy, X-ray diffraction analysis, and scanning electron microscopy.

Polyethersulfone (PES) ultrafiltration (UF) membranes loaded with silver nitrate for bacteria removal

  • Basri, H.;Ismail, A.F.;Aziz, M.
    • Membrane and Water Treatment
    • /
    • 제2권1호
    • /
    • pp.25-37
    • /
    • 2011
  • PES UF membranes containing silver were prepared to impart antibacterial properties for waste water treatment. Asymmetric membranes for antibacterial application were prepared from polyethersulfone (PES) and silver nitrate ($AgNO_3$) (PES/$AgNO_3$=15/2 by weight) solution in N-Methyl-2-pyrrolidone (NMP) via simple wet phase inversion technique. These membranes were characterized by polyvinylpyrrolidone (PVP) and polyethylene glycol (PEG) of different molecular weights (1000 ppm in water) at room temperature and on operating pressure of 5 bars. It was observed that the water flux of PES-$AgNO_3$ membrane is slightly lower than virgin PES but still increased linearly with the increment of pressure applied. The morphology of the resulting membranes was examined using Field-Emission Scanning Electron Microscope (FESEM) coupled with Energy Dispersive Spectroscopy (EDS). Elemental analysis using EDS proved that silver is successfully loaded on the membrane surfaces. Due to the success of loading silver on membrane surfaces, antibacterial activities were evaluated via agar diffusion method against Escherichia coli (E.coli) and Staphylococcus aureus (S.aureus) culture. By incorporating 2 wt% of silver nitrate, PES-$AgNO_3$ showed significant inhibition ring on both E.coli and S.aureus. Filtration of E.coli solution (OD 0.31) showed satisfactory rejection data with ~100% inhibition growth after 24 hours incubation at $37^{\circ}C$. Resultant membranes also exhibit better tensile strength (compared to virgin PES) up to 71% may be due to the suggested interactions. The residual silver during fabrication was measured using ICP-MS and result showed that the residual silver content of PES-$AgNO_3$ membrane was only ~1% of the original silver added in the polymer solution. These studies have shown that PES-$AgNO_3$ UF membranes are potential in improving the filtration in water treatment.

Fall cone test의 함수비를 이용한 잔적토의 풍화도 측정 (Estimation of Degree of Weathering in Residual Soil Using Water Content from Fall Cone Test Result)

  • 손영환;장병욱;김성필
    • 한국지반공학회논문집
    • /
    • 제23권12호
    • /
    • pp.13-23
    • /
    • 2007
  • 풍화토는 암석으로부터 풍화되어 그 산물로 나타난다. 또한, 풍화정도에 따라 연암, 풍화암, 잔적토에 이르기까지 그 산물은 다양하다. 일반적으로 풍화정도의 결정은 화학적 방법이나 표준관입시험의 N-value를 이용한다. 그러나 이러한 방법은 약간의 단점을 가지고 있으며, 이에 본 연구에서는 교란시료와 물리적인 방법인 Fall cone test를 이용하여 풍화정도를 결정할 수 있는 방법을 제시하였다. Fall cone test 결과, 동일한 지역에서 풍화정도의 차이를 확인할 수 있었으며, 관입량에 따른 화학적풍화지수(CWI)와 함수비의 관계는 하나의 방정식으로 표현할 수 있었다.

버섯 재배용 배지 재료로 수입한 농업부산물에서 중금속, 잔류농약, 영양성분 조사 (Investigation of Heavy Metals, Residual Pesticides and Nutrient Component from Agricultural By-products Imported as Medium Substrates for Mushroom Cultivation)

  • 김준영;이근식;이찬중;김성환
    • 한국환경농학회지
    • /
    • 제36권3호
    • /
    • pp.217-221
    • /
    • 2017
  • BACKGROUND: For the food safety of cultivated mushroom, information on the safety of agricultural by-products imported as medium substrates for mushroom cultivation is urgently needed. Therefore, this study was performed to detect the presence of heavy metals, residual pesticides, and nutrient component in the imported medium substrates. METHODS AND RESULTS: Six kinds of medium substrates imported from nine countries from 2015 to 2017 were investigated. A mercury analyzer MA-2000 and an inductively coupled plasma spectrometer OPTIMA 7000DV were used to analyze mercury, lead, arsenic, copper, nickel and cadmium. All of these heavy metals were detected at lower level than heavy metal tolerance standard level of by-product fertilizer in Korea. When 246 kinds of residual pesticides were examined by GC and HPLC, imidacloprid, thiamethoxam and carbendazim were detected from Egyptian beet pulp, Indian cottonseed meal and cottonseed hull, respectively. The content of nutrient components (water, crude ash, crude fat, crude protein and crude fiber) varied among imported countries and the medium substrates. CONCLUSION:The presence of heavy metals and residual pesticides in imported medium substrates for mushroom cultivation was confirmed. For the safe production of mushroom, this study shows that imported medium materials for mushroom cultivation need to be managed through continuous monitoring.

토양내 총 NAPL과 공기접촉 NAPL의 측정을 위한 분별 NAPL 분배 추적자 기술의 개발

  • 최경민;김헌기
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2004년도 임시총회 및 추계학술발표회
    • /
    • pp.29-32
    • /
    • 2004
  • Gaseous partitioning tracer test has been used for determining the volume and spatial distribution of residual non-aqueous phase liquid (NAPL) in the unsaturated soils. In this study, an experimental method for measuring the content of gas-exposed NAPL as well as that of total NAPL in a sand during air sparging was developed. Two different gaseous phase NAPL-partitioning tracers were used; n-pentane, with very low water solubility, was used as the tracer that partitions into NAPL that is only in contact with the mobile gas, and chloroform, with fairly good water solubility, was selected for detecting total NAPL content in the sand. Helium and difluromethanewere used as the non- reactive tracer and water-partitioning tracers, respectively. Using n-decane as a model NAPL (NAPL saturation of 0.018), 25.6% of total NAPL was detected by n-pentane at the water saturation of 0.68. Oniy 9.1% of total NAPL was detected by n-pentane at the water saturation of 0.84. This result implies that the quantity of gas-exposed NAPL increased about three times when the water saturation decreased from 0.84 to 0.68. At the water saturation of 0.68, more than 90% of total NAPL was detected by chloroform while 65.8% of total NAPL was detected by chloroform at the water saturation of 0.84. Considering that the removal rate of NAPL during air sparging for NAPL-contaminated aquifer is expected to be greatly dependent upon the spatial arrangement of NAPL phase with respect to the mobile gas, this new approach may provide useful information for investigating the mass transfer process during air-driven remedial processes fer NAPL-contaminated subsurface environment.

  • PDF