• 제목/요약/키워드: Residual space

검색결과 303건 처리시간 0.029초

내부 부상형 저장탱크(IFRT) 화재·폭발사고 원인 분석: OO송유관공사 저유소 화재·폭발사건을 중심으로 (Analysis of Cause of Fire and Explosion in Internal Floating Roof Tank: Focusing on Fire and Explosion Accidents at the OO Oil Pipeline Corporation)

  • 구채칠;최재욱
    • 한국화재소방학회논문지
    • /
    • 제34권2호
    • /
    • pp.86-93
    • /
    • 2020
  • 본 연구는 옥외저장탱크에서 발생한 화재·폭발사고의 근본적인 사례분석을 통해 저장탱크의 안전을 유지할 목적으로 수행되었다. 이 사고는 저장탱크 야드에 사업장 외에서 날아온 풍등이 저장탱크 주변 잔디에 떨어지며 발생한 잔재 화재가 서서히 확산되어 탱크 내부의 유증기와 만나 폭발·화재로 이어진 사고였다. 사고의 원인을 밝혀내기 위하여 CCTV영상분석을 통한 대기확산 조건 도출, 전산유체역학을 이용한 풍향 분석, 플러팅 루프가 최저 위치일 때의 탱크 내부 유증기 발생량, 최고 위치일 때의 탱크 내부 유증기 거동을 통하여 저장탱크의 폭발이 일어난 원인을 밝혀내어 저장탱크의 레벨을 내부부상형 지붕 이하로 유지했을 경우 위험물이 충전되면서 그 공간에 있던 유증기가 내부 부상지붕위에 정체될 가능성이 있으므로 저장탱크의 Low liquid level이 폰튠 서포트 밑에 위치하지 않도록 운전절차를 개선하고, 오픈 벤트에는 화염방지기를 설치하여 화염이 저장탱크로 유입하지 못하도록 하는 대책을 제시하고자 한다.

고기동 안정화 카메라 및 원격제어 셀프카메라를 적용한 캔위성 시스템 개발 (Development of A CanSat System Applying High Agility Camera and Remote Control Camera)

  • 김수현;박재현;김혜인;배기성;채봉건;오현웅
    • 항공우주시스템공학회지
    • /
    • 제12권3호
    • /
    • pp.86-96
    • /
    • 2018
  • 본 논문에서 제안한 캔위성은 2017년 캔위성 경연대회에 출전한 $HA+RC^2S$ CanSat (High Agility and Remote Control Camera System Can Satellite)이다. 주요임무는 수동진동감쇠기인 동흡진기를 사용하여 카메라를 회전시킨 직후에 발생하는 잔류진동을 감쇠하여 고품질의 영상획득이 가능한 고기동 안정화 카메라 시스템을 검증하는 것이다. 부가적으로는 지상국의 조이스틱을 사용하여 무선으로 제어되는 원격 제어 셀프카메라로 캔위성 자체의 이미지데이터를 획득하는 것이다. 본 논문에서는 임무 정의, 시스템 설계, 제작, 기능 및 성능시험, 최종 비행시험을 포함하는 $HA+RC^2S$ CanSat의 개발과정에 대해 서술하였다.

실내압밀시험과 GIS 기법을 이용한 대규모 매립지역의 장기침하량 예측 (A Prediction of Long-Term Settlement in Large Reclamated Sites Using Laboratory Consolidation Tests and GIS Techniques)

  • 박사원;김홍택;박성원;백승철;박상권
    • 한국지반환경공학회 논문집
    • /
    • 제7권3호
    • /
    • pp.5-19
    • /
    • 2006
  • 연약 점토지반에서의 2차 압밀침하량은 일반적으로 전체 압밀침하량에 비해 미소하고 2차 압밀까지의 종료시간도 상당히 길기 때문에 이를 무시하는 경우가 많으나 유기질 또는 고압축성의 점토에서는 비교적 큰 침하량이 발생하기 때문에 중요한 공학적 요소로 간주된다. 이러한, 준설매립지반의 잔류침하량을 저감시키기 위해선 선행재하공법(preloading)이 주로 적용된다. 본 연구에서는 대규모 매립지역의 장기침하량을 보다 합리적으로 결정하기 위하여 실내에서 단계재하 압밀시험 및 surcharging 압밀시험 등을 수행하였다. 서해안(인천) 및 남해안(광양) 일대의 대규모 준설매립지역에서 시료를 채취했으며, 이 지역내 준설점토의 2차 압밀특성치들을 실험으로 규명하여 장기침하량 예측에 필요한 기초자료로 활용하였다. 또한, 지리정보체계(geographic information system, 이하 GIS)의 위치정보(수치지도)에 지반정보(속성자료)를 접목시켜 해당지역의 자료를 D/B화 한 후, GIS의 연산기능 및 공간추정 기능 등을 활용함으로써 대규모 준설매립지역의 2차 압밀침하량을 예측하였다.

  • PDF

대륙붕 2광구 서해분지 북부지역의 3D전산처리 최적화 방안시 고려점 (The Consideration for Optimum 3D Seismic Processing Procedures in Block II, Northern Part of South Yellow Sea Basin)

  • 고승원;신국선;정현영
    • 한국석유지질학회지
    • /
    • 제11권1호
    • /
    • pp.9-17
    • /
    • 2005
  • 2광구의 주요 탐사지역에는 심도 1 km 내외의 부정합면 하부에 대규모 단층이 발달되어 있다. 통상 이 부정합 인근의 탄성파 속도차는 매우 큰 편으로서 강한 다중반사파가 흔하게 발달되었고 탄성파 단면도는 왜곡되어 중합단면의 질적 저하가 예상되었다. 구조 인근의 다중반사파를 제거하고 해상력을 제고하기 위해 15가지 이상의 다양한 전산처리 기법이 적용되었다. 진폭 감소보정, 미약한 F/K 적용으로 일관성 잡음을 감쇠시켰다. 중합전 예측디콘볼루션으로 페그레그 다중반사파를 제거하였고 중합속도를 구하기 위해 매 2 km 간격으로 분석되었다. 잔여 다중반사파도 parabolic 라돈 변형절차를 거쳐 제거되었다. 중합자료를 얻기 위해 곡선파 curved ray Kirchhoff형 알고리즘이 적용되었으며, MVA (migration velocity analysis)가 이용되었다. 결과적으로 자료 취득기간의 기상변화 등 취득시의 문제점으로 지적된 불량한 잡음이 섞인 트레이스는 최초로 CDP gathers에서 제거되었다. 이후 다수의 전산처리 기법을 써서 최적의 전산처리 변수가 구해졌으며 그 결과 서해대륙붕 2광구의 구조 및 층서 해석에 적합한 탄성파 단면도 획득을 위한 인자들을 얻을 수 있었다.

  • PDF

Ultrastructures of Germ Cells and the Accessory Cells During Spermatogenesis in Male Gomphina veneriformis (Bivalvia: Veneridae) on the East Sea of Korea

  • Chung, Ee-Yung;Chung, Chang-Ho;Kim, Jin-Hee;Park, Sung-Woo;Park, Kwan-Ha
    • 한국패류학회지
    • /
    • 제26권1호
    • /
    • pp.51-62
    • /
    • 2010
  • The ultrastructures of germ cells and the accessory cells during spermatogenesis and mature sperm ultrastructure in male Gomphina veneriformis, which was collected on the coastal waters of Yangyang, East Sea of Korea, were investigated by transmission electron microscope observations. The morphology of the spermatozoon has a primitive type and is similar to those of other bivalves in that it contains a short midpiece with four mitochondria surrounding the centrioles. Accessory cells are observed to be connected to adjacent germ cells, they contain a large quantity of glycogen particles and lipid droplets in the cytoplasm. Therefore, it is assumed that they are involved in the supplying of the nutrients for germ cell development, while any phenomena associated with phagocytosis of undischarged, residual sperms by lysosomes in the cytoplasm of the accessory cells after spawning was not observed in this study. The morphologies of the sperm nucleus type and the acrosome shape of this species have a cylindrical and modified long cone shape, respectively. In particular, the axial filaments in the lumen of the acrosome, and subacrosomal granular materials are observed in the subacrosomal space between the anterior nuclear fossa and the beginning part of axial filaments in the acrosome. The spermatozoon is approximately $50-55{\mu}m$ in length including a long sperm nucleus (about $7.80{\mu}m$ in length), an acrosome (about $1.13{\mu}m$ in length) and tail flagellum ($40-45{\mu}m$). The axoneme of the sperm tail flagellum consists of nine pairs of microtubules at the periphery and a pair at the center. The axoneme of the sperm tail shows a 9+2 structure. Some charateristics of sperm morphology of this species in the family Veneridae are (1) acrosomal morphology, (2) the number of mitochondria in the midpiece of the sperm,. The axial filament appears in the acrosome as one of characteristics seen in several species of the family Veneridae in the subclass heterodonta, unlikely the subclass pteriomorphia containing axial rod instead of the axial filament. As some characteristics of the acrosome structures, the peripheral parts of two basal rings show electron opaque part (region), while the apex part of the acrosome shows electron lucent part (region). These charateristics belong to the family Veneridae in the subclass heterodonta, unlikely a characteristic of the subclass pteriomorphia showing all part of the acrosome being composed of electron opaque part (region). Therefore, it is easy to distinguish the families or the subclasses by the acrosome structures. The number of mitochondria in the midpiece of the sperm of this species are four, as one of common characteristics appeared in most species in the family Veneridae.

Bone regeneration capacity of two different macroporous biphasic calcium materials in rabbit calvarial defect

  • Park, Jung-Chul;Lim, Hyun-Chang;Sohn, Joo-Yeon;Yun, Jeong-Ho;Jung, Ui-Won;Kim, Chang-Sung;Cho, Kyoo-Sung;Kim, Chong-Kwan;Choi, Seong-Ho
    • Journal of Periodontal and Implant Science
    • /
    • 제39권sup2호
    • /
    • pp.223-230
    • /
    • 2009
  • Purpose: Synthetic bone products such as biphasic calcium phosphate (BCP) are mixtures of hydroxyapatite (HA) and ${\beta}$-tricalcium phosphate (${\beta}$- TCP). In periodontal therapies and implant treatments, BCP provides to be a good bone reconstructive material since it has a similar chemical composition to biological bone apatites. The purpose of this study was to compare bone regeneration capacity of two commercially available BCP. Methods: Calvarial defects were prepared in sixteen 9-20 months old New Zealand White male rabbits. BCP with HA and ${\beta}$- TCP (70:30) and BCP with Silicon-substituted hydroxyapatite (Si-HA) and ${\beta}$-TCP (60:40) particles were filled in each defect. Control defects were filled with only blood clots. Animals were sacrificed at 4 and 8 week postoperatively. Histomorphometric analysis was performed. Results: BCP with HAand ${\beta}$- TCP 8 weeks group and BCP with Si-HA and ${\beta}$- TCP 4 and 8 weeks groups showed statistically significant in crease (P <0.05) in augmented area than control group. Newly formed bone area after 4 and 8 weeks was similar among all the groups. Residual materials were slightly more evident in BCP with HA and ${\beta}$- TCP 8 weeks group. Conclusions: Based on histological results, BCP with HA and ${\beta}$- TCP and BCP with Si-HA and ${\beta}$- TCP appears to demonstrate acceptable space maintaining capacity and elicit significant new bone formation when compared to natural bone healing in 4 and 8 week periods.

Observation of the Cosmic Near-Infrared Background with the CIBER rocket

  • 김민규;;이형목;;;;;;;;;이대희;;;;;남욱원
    • 천문학회보
    • /
    • 제37권1호
    • /
    • pp.42-42
    • /
    • 2012
  • The First stars (Pop.III stars) in the universe are expected to be formed between the recombination era at z - 1100 and the most distant quasar (z - 8). They have never been directly detected due to its faintness so far, but can be observed as a background radiation at around 1${\mu}m$ which is called the Cosmic Near-Infrared Background (CNB). Main part of the CNB is thought to be redshifted Lyman-alpha from gas clouds surrounding the Pop.III stars. Until now, the COBE (COsmic Background Explorer) and the IRTS (Infrared Telescope in Space) observed excess emission over the background due to galaxies. To confirm the COBE and the IRTS results and pursue more observational evidences, we carried out the sounding rocket experiment named the Cosmic Infrared Background ExpeRiment (CIBER). The CIBER is successfully launched on July 10, 2010 at White Sands Missile Range, New Mexico, USA. It consists of three kinds of instruments. We report the results obtained by LRS (Low Resolution Spectrometer) which is developed to fill the uncovered spectrum around 1${\mu}m$. LRS is a refractive telescope of 5.5 cm aperture with spectral resolution of 20 - 30 and wavelength coverage of 0.7 to 2.0${\mu}m$. After subtracting foreground components (zodiacal light, integrated star light and diffuse galactic light) from the sky brightness of observed five fields, there remained significant residual emission (even for the lower limit case) consistent with the IRTS and the COBE results. In addition, there exists a clear gap at 0.7 - 0.8${\mu}m$ in the CNB spectrum over the background due to galaxies according to recent results (Matsuoka et al. 2011; Mattila et al. 2011). The origin of the excess emission could be ascribed to the Pop.III stars with its active era of z = 7 - 10.

  • PDF

휨인성을 고려한 강섬유보강 숏크리트 거동의 수치해석적 연구 (A Numerical Study on the Behavior of Steel Fiber Reinforced Shotcrete in Consideration of Flexural Toughness)

  • 조병욱;유광호;김수만;임두철;이상돈;박연준
    • 터널과지하공간
    • /
    • 제17권5호
    • /
    • pp.411-427
    • /
    • 2007
  • 타당성 있는 터널의 설계 및 경제적 시공을 위해서는 터널해석의 신뢰성이 확보되어야 한다. 이를 위해서는 암반과 지보재의 상호 작용을 포함하여 시공 전반에 걸친 깊은 이해가 필요하다. 본 논문에서는 파괴 이후에도 지보력을 상실하지 않는 강섬유보강 숏크리트의 거동을 적절히 모델링하는 기법을 소개하였다. 강지보재의 지보 효과를 알아보기 위해 3차원 해석을 수행하였으며, 이를 통하여 새로운 하중분담율이 산정되었다. 소성모멘트한계만을 사용한 경우(PML 모델) 숏크리트에 비정상적으로 발생하던 높은 인장응력을 없앨 수 있었고, 파괴 후의 연성 거동을 모사할 수 있었으나 축력의 영향이 고려되지 못하여 실제 거동과의 괴리를 메우기에는 다소 미흡하였다. 따라서 축력과 모멘트 한계를 동시에 고려할 수 있는 방법이 필요하였는데, FLAC의 내장 모델인 liner 모델을 통하여 이러한 거동이 모사될 수 있었다. Liner 모델에서는 강섬유 보강 숏크리트의 일축압축 강도와 더불어 최대 및 잔류 인장강도도 지정이 가능하다. 이 두 가지 모델을 이용하여 4등급 및 5등급 암반에 굴착되는 2차로 터널에 대하여 해석을 수행하였다. 또한 종래에 사용되던 탄성 beam 모델을 이용한 해석도 병행하여 그 결과를 비교하였다. 탄성 beam 모델을 제외한 두 가지 모델은 탄성 beam 모델에서는 반영될 수 없었던 휨인성을 고려할 수 있었다.

해안매립지 대심도 굴착지역의 불포화 함수특성에 따른 침투류 거동 (Seepage Behavior with Unsaturated Soil-Water Characteristic in Reclaimed Deep Excavation Area)

  • 신방웅;이흥길
    • 한국지반환경공학회 논문집
    • /
    • 제6권4호
    • /
    • pp.47-58
    • /
    • 2005
  • 지하공간의 효율적인 이용을 위하여 여러 분야에서 활발한 연구와 개발이 이루어지고 있으며 최근 들어 해안지역의 대심도 굴착을 통한 지하공간 활용방안에 관한 연구와 시공이 지속적으로 이루어지고 있다. 해안지역 및 매립지반의 침투류 거동은 조위영향에 의한 부정류 흐름이 발생되므로 부정류 흐름해석의 지배인자인 불포화토의 함수특성에 대한 연구가 요구된다. 본 연구에서는 불포화 함수특성에 따른 대심도 굴착지역의 침투류 거동을 분석하기 위하여 해안 준설매립지역 토사에 대한 함수특성시험을 수행하였으며, 불포화 함수특성에 따라 침투류 해석을 수행하여 실제 계측된 침투유량과 비교 분석하였다. 해안 매립지 토사에 대한 함수특성시험 결과 및 함수특성 계수에 대한 분석결과, Fredlund and Xing의 경험방정식이 해안 매립지반 토사에 대하여 높은 정확도로 실험결과 값을 나타내었다. 함수특성을 고려한 침투해석 결과, 부정류해석 결과가 정류해석 결과에 비하여 양수시험 결과 및 실제 계측된 용수량과 근접한 침투유량이 도출되어 해안 준설매립지반과 같이 불포화토 특성이 지배적인 지반에 대해서는 함수특성을 고려한 부정류 침투해석을 적용하여야 할 것으로 판단된다.

  • PDF

천공형 티타늄 막의 조기 노출이 수직 골 형성에 미치는 영향 (The effect of early membrane exposure on exophytic bone formation using perforated titanium membrane)

  • 김은정;허익;권영혁;박준봉;정종혁
    • Journal of Periodontal and Implant Science
    • /
    • 제37권2호
    • /
    • pp.237-249
    • /
    • 2007
  • This study was performed to evaluate the effect of membrane exposure on new bone formation when guided bone regeneration with perforated titanium membrane on atrophic alveolar ridge. The present study attempted to establish a GBR model for four adult beagle dog premolar. Intra-marrow penetration defects were created on the alveolar ridge(twelve weeks after extraction) on the mandibular premolar teeth in the beagle dogs. Space providing perforated titanium membrane with various graft material were implanted to provide for GBR. The graft material were demineralized bovine bone(DBB), Irradiated cancellous bone(ICB) and demineralized human bone powder(DFDB). The gingival flap were advanced to cover the membranes and sutured. Seven sites experienced wound failure within 2-3weeks postsurgery resulting in membrane exposure. The animals were euthanized at 4 weeks postsurgery for histologic and histometric analysis. The results of this study were as follows: 1. There was little new bone formation at 4 weeks postsurgery. irrespectively of membrane exposure. 2. There was significant relationship between membrane exposure and bone graft resorption(P<0.05), but no relation between membrane exposure and infiltrated connective tissue. 3. There was much bone graft resorption on DFDB than ICB and DBB. 4. The less exposure was on the perforated titanium membrane, the more dense infiltrated connective tissue was filled under the membrane when grafted with ICB and DBB. but there was no relationship between the rate of membrane exposure and the percentage of infiltrated connective tissue area and no relationship between the percentage of the area in the infiltrated connective tissue and in the residual bone graft. Within the above results, bone formation may be inhibited when membrane was exposed and ICB and DBB were more effective than DFDB as a bone graft material when guided bone regeneration.