• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.126-129
• /
• 2001

LIPCA (LIghtweight Piezo-composite Curved Actuator) is an actuator device which is lighter than other conventional piezoelectric ceramic type actuator. LIPCA is composed of a piezoelectric ceramic layer and fiber reinforced light composite layers, typically a PZT ceramic layer is sandwiched by a top fiber layer with low CTE (coefficient of thermal expansion) and base layers with high CTE. LIPCA has curved shape like a typical THUNDER (thin-layer composite unimorph feroelectric driver and sensor), but it is lighter an than THUNDER. Since the curved shape of LIPCA is from the thermal deformation during the manufacturing process of unsymmetrically laminated lay-up structure, an analysis for the thermal deformation and residual stresses induced during the manufacturing process is very important for an optimal design to increase the performance of LIPCA. To investigate the thermal deformation behavior and the induced residual stresses of LIPCA at room temperature, the curvatures of LIPCA were measured and compared with those predicted from the analysis using the classical lamination theory. A methodology is being studied to find an optimal stacking sequence and geometry of LIPCA to have larger specific actuating displacement and higher force. The residual stresses induced during the cooling process of the piezo-composite actuators have been calculated. A lay-up geometry for the PZT ceramic layer to have compression stress in the geometrical principal direction has been designed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.50-57
• /
• 2013

The high temperature thermal attacks in welding can affect the residual stress of a frame for automotive assembly accompanying frame deformation. Also the residual stress can induce the negative effect on durability performance of the automobile. In order to analyze the frame deformation, the simplified test frame which had the similar shape (form) of the real automotive frame was fabricated. The contactless optical 3D scanner was used for the shape difference measurement of the frame between before and after the welding. The FE-model of the test frame was composed and the deformation and residual stress simulation were performed. The simulated results were compared with the measured results for the reference of the frame design following as the variation of welding sequency. The deformation shape of the frame by simulation was in good agreement with that by the experimental measurement. In addition, the optimized welding sequency with reduced deformation after welding could be achieved through these analyses.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.39-43
• /
• 1996

This paper described on the effect of residual stocks in internal grinding of tungsten carbide materials in order to improve the grinding efficiency as well as grinding accuracy. Though the fundamental investigation is carried out for tungsten carbide materials using electroplated diamond wheel, the residual stock after grinding process is effective to the grinding effciiency. The obtained results are as follows: (1) Under the depth of cut(t) is constant and decreasing the workpiece velocity(Vw), the resiudal stock after grinding is increased, but the difference is little less than the difference by table speed. (2) Increasing the wheel velocity, the residual stock after grinding is decreased. Therefore in order to minimize the residual stock, the wheel velocity should be increased as far as possible. (3) The surface foughness and out-of roundness increased with depth of cut and table speed, and decreased with wheel velocity, but it may as well adopt as much as polssible under the dimensional tolerance which is required for high efficiency grinding. (4) In order to remove residual stock, the spark-out grinding shoule be done, and it also can be improved about 20 .approx. 25% throughout spark-out grinding, and the number of optimal spark-out times were within 10 times.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.127-134
• /
• 2023

Recently, various input shapers have been introduced to reduce residual vibrations of flexible robots. However, there have been no studies on the design of an input shaper that can suppress residual vibration at an arbitrarily specified duration. In this paper, a novel input shaper called an SD (specified-duration) shaper is proposed for an undamped or underdamped system, which can suppress residual vibration at an arbitrarily given specified duration. If the specified duration is larger than a half period, a positive SD shaper composed of all positive impulses is designed, and if the specified duration is smaller than a half period, a negative SD shaper including a negative impulse is designed. As the specified duration is increased every half period after a half period, the number of impulses of the positive SD shaper is increased one by one, and the robustness of the SD shaper to modeling errors is increased. The performance of the SD shaper is analyzed through simulation studies for an undamped and underdamped second-order systems. The validity of the SD shapers is demonstrated experimentally using an experimental device that can generate container transport motions.

• Advances in concrete construction
• /
• v.16 no.1
• /
• pp.1-20
• /
• 2023

This study presents the experimental results performed to evaluate the effects of Polyvinyl-alcohol (PVA) and Polypropylene (PP) fibers on the fresh and residual mechanical properties of the hybrid fiber reinforced SCC before and after the exposure of 250℃, 500℃ and 750℃ temperatures. The compressive and splitting tensile strength, modulus of rupture (MOR), ultrasonic pulse velocity (UPV) as well as toughness and weight loss were investigated at different temperatures. PVA and PP fibers were added into SCC mixtures having only macro steel fiber and also having binary hybridization of both macro and micro steel fiber. The results showed that the use of micro steel fiber replaced by macro steel fiber improved the fresh and hardened properties compared to the use of only macro steel fiber. Moreover, it was emphasized that PVA or PP enhanced the residual flexural performance of SCC, generally, while it negatively influenced the workability, weight loss, UPV and the residual strengths with regards to the use of single steel fiber and binary steel fiber hybridization. Compared to the effect of synthetic fibers, PP had slightly more positive effect in the view of workability while PVA enhanced the residual mechanical properties more.

• Journal of the Microelectronics and Packaging Society
• /
• v.24 no.3
• /
• pp.41-46
• /
• 2017

In this study, rapid cooling method was proposed to improve the anti-scratch performance of anti-reflection film fabricated by nanoimprint lithography. Effects of cooling time on the mechanical properties and optical properties were evaluated. Pencil hardness measurements showed that anti-scratch performance enhanced as the cooling time increased while characterization on the optical property showed that reflectance on scratch increased as the cooling time increased. Therefore, it was concluded that the anti-scratch performance and optical properties are highly influenced by the cooling time. The observed results explained in terms of residual stress and free volume in polymeric materials.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.109-114
• /
• 2016

This paper relates with the performance improvement of CCA (Compact Constellation Algorithm) equalization algorithm by adding the adaptive step size control in order to the minimization of intersymbol interference and additive noise effects that is occurs in the channel for digital radio transmissionl. In general, the fixed step size was used in order to adaptation in equalizer algorithm. But in proposed algorithm, the variable step size were adapted that is proposional to the nonlinear function of error signal for equalization. In order to show the improved equalizatation performance, the output signal constellation of equalizer, residual isi, maximum distortion, MSE and SER were used, then it were compared with the present CCA algorithm. As a result of computer simulation, the adaptive step size CCA has more better performance in the every performance index compared to the fixed step size CCA after in the steay state.

• Journal of Families and Better Life
• /
• v.22 no.6 s.72
• /
• pp.165-175
• /
• 2004

The purpose of this study was to classify the household financial strategies and investigate major determinants of the household financial strategies and financial performance. The data of 3,994 households is from the Korean Labor and Income Panel Stud?. The major findings were as follows. (1) The classified household financial strategies types were Residual ($44.6\%$), Informal Institutional ($13.3\%$), Financial Assets ($16.7\%$), Real Estate ($13.4\%$), and Diversified Portfolio ($12.0\%$). (2) The criteria of classification of the household financial strategies were relative, not absolute. (3) The household financial strategy types changed largely during a short period(1999-2000). (4) In all households, the variables that affected changes in household financial strategies were education, occupation, number of children, residential location and home ownership. (5) Households that employed a diversified portfolio strategy had the greatest financial performance (2,316,000 won net gain). (6) In all households, the variables that had the greatest influence on financial performance were the number of children, assets and debts. 1'he financial performance was significantly different according to changes in the household financial strategy.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.63-70
• /
• 2013

In this paper, we investigated frequency synchronization through computer simulation of digital M/W transmission system in multipath fading channel. we suggested frequency offset correction algorithm against frequency offset between transmitter and receiver, then evaluated the degree of constellation performance enhancement. From the performance evaluation, in case of large frequency offset, although adopting frequency offset correction scheme, residual frequency offset degraded system performance. As a result, according to frequency offset value between transmitter and receiver residual frequency offset affects system performance significantly. The results of this paper should be utilized for frequency synchronization criterion when frequency band of broadcasting system is rearranged.

• Steel and Composite Structures
• /
• v.18 no.1
• /
• pp.273-288
• /
• 2015

As one of the most common failure types of arch bridges, stability is one of the critical aspects for the design of arch bridges. Using 3D finite element model in ABAQUS, this paper has studied the stability performance of an arch bridge with inclined arch ribs and hangers, and the analysis also took the effects of geometrical and material nonlinearity into account. The impact of local buckling and residual stress of steel plates on global stability and the applicability of fiber model in stability analysis for steel arch bridges were also investigated. The results demonstrate an excellent stability of the arch bridge because of the transverse constraint provided by transversely-inclined hangers. The distortion of cross section, local buckling and residual stress of ribs has an insignificant effect on the stability of the structure, and the accurate ultimate strength may be obtained from a fiber model analysis. This study also shows that the yielding of the arch ribs has a significant impact on the ultimate capacity of the structure, and the bearing capacity may also be approximately estimated by the initial yield strength of the arch rib.