• 상하수도학회지
• /
• 제21권1호
• /
• pp.113-122
• /
• 2007

Experimental studies were performed to investigate speciation and leaching potential of heavy metals(Cu, Cd, Pb Zn, Ni) in ten sediment samples collected from Nakdong River. Acid Volatile Sulfide (AVS) and Simultaneously Extractable Metals (SEM) measurements were used to estimate heavy metals that can be leached under anaerobic conditions. Sequential Extraction Procedure (SEP) and Toxicity Characteristic Leaching Procedure (TCLP) were used to characterize speciation and leaching potential of heavy metals under aerobic conditions. The results show that total concentrations of Cu, Zn and Ni were relatively high in the sediments from points Seongseo industrial complex stream (upper stream) (D), Seongseo industrial complex stream (midstream) (E), Dalseo stream (F), and Nakdong river estuary (J), and that Cd concentrations were higher in all sampling points except for Goriung Bridge (G) and Soosan Bridge (H). SEM and AVS analyses reveal that samples from points Ilsun Bridge (A), Namgumi Bridge (C), and Soosan Bridge (H) have potential of heavy metals leaching, although leachable concentrations are relatively low. The leaching potential of heavy metals in other points was low because of higher concentrations of AVS than SEM. SEP results show that more than 50% of Cu, Zn and Ni were present in residual fraction, which means these metals are less amenable to leaching in anaerobic conditions. On the other hand, more than 50% of Pb and Cd were extracted during the first through third step of the SEP, which means substantial fraction of these metals can be leached upon changing of redox conditions. TCLP tests predict that leaching potential of heavy metals was generally low, which is consistent with the results obtained by AVS and SEM measurements.

• Steel and Composite Structures
• /
• 제28권6호
• /
• pp.759-766
• /
• 2018

Friction Stir Welding (FSW) is a solid-state process, where the objects are joined together without reaching their melting point. It has been shown that this method is a suitable way to join dissimilar aluminium alloys. The current article employed hole drilling technique to measure the residual stress distribution experimentally in different zones of dissimilar aluminium alloys AA6061-T6 and AA7075-T6 Butt welded using FSW. Results are compared with those of similar AA6061-T6 plates joined using a conventional fusion welding method called tungsten inert gas (TIG). Also, the evolution of the residual stresses in the thickness direction was investigated, and it was found that the maximum residual stresses are below the yield strength of the material in the shoulder region. It was also revealed that the longitudinal residual stresses in the joint were much larger than the transverse residual stresses. Meanwhile, Vickers micro hardness measurements were performed in the cross-section of the samples. The largest hardness values were observed in the stir zone (SZ) adjacent to the advancing side whereas low hardness values were measured at the HAZ of both alloys and the SZ adjacent to the retreating side.

• 한국레이저가공학회지
• /
• 제16권1호
• /
• pp.15-19
• /
• 2013

For numerical simulation of the deformation and residual stress development in metals during laser peening, the constitutive equations describing material behavior at various strain rates and plastic properties at high strain rate impact conditions are prerequisite. However, these parameters are often unknown for various engineering materials. In this study, the parameters of Johnson-Cook constitutive equation of duplex stainless steel were determined by comparing the residual stress profile predicted by numerical simulation using trial values and the measured residual stress profile with x-ray diffraction.

• 한국안전학회지
• /
• 제8권4호
• /
• pp.194-200
• /
• 1993

Al합금 7075에 대해서 공작물 이송속도, 연삭깊이 및 유제 공급방법이 잔류응력에 미치는 영향을 실험적으로 행하였다. 가공 변질층에 형성된 잔류응력을 측정하기 위해 X선 회절법을 사용하였다. 개발된 노즐 공급방법 (Guide noazle)은 인장 잔류응력 및 연삭저항, 표면조도 부분에서 기존 노즐보다 좋은 효과를 가져 왔다. 연삭깊이 및 공작물 이송속도를 감속시키고 아울러 스파크 아웃을 행하면 잔류응력 및 표면 조도를 감소시킬 수 있다.

• Journal of Welding and Joining
• /
• 제22권3호
• /
• pp.45-49
• /
• 2004

Generally, it is used the compensation spring to compensate the inaccuracy of screen image induced by thermal deformation in CRT monitor. Its mechanism is hi-metallic system made of heterogeneous metals and these springs are bonded by laser welding. But laser welding induces a non-uniform temperature distribution, and residual stress is yielded locally by these temperature deviation. Therefore, this study measures the curvature constant to assess functions of the compensation spring of shadow mask with respect to increment temperature and estimates the effect of residual stress on the performance of tri-metal used to compensation spring.

• 자원환경지질
• /
• 제34권5호
• /
• pp.461-470
• /
• 2001

시흥광산은 1973년 폐장되었으며 1990년 초에 선광장 및 광미야적장에 있던 광미들을 제거한 후 그 자리에 소각장을 건설하는 폐광 복원사업을 실시하였다. 그러나 현재에도 광미가 완전히 제거되지 않았으며 광산 가동기간동안 많은 양의 광미가 주변 토양 및 논으로 이동, 퇴적된 것이 확인되는 바 광미와 물 반응으로 인한 침출수 형성과 주변 지하수 토양의 중금속 오염이 예상된다. 된 연구는 잔류광미와 물 반응에 따른 광산배수의 지구화학적 진화과정을 분석하고 주변 지하수 · 토양 오염 가능성을 평가하고자 하였다. 광미에서 추출한 공극수는 깊이에 따라 그 농도가 증가함을 보여 광미-불 반응을 통하여 지속적으로 중금속이 용출됨을 시사한다. 광미 중금속 용출은 공극수뿐 아니라 표면과 심부에서 각자 채취한 광미시료들간의 화학성분 차이에서도 확인된다. 광산 배수 기원지역과 하부 지역의 지하수 시료를 거리에 따라 채취, 분석한 결과 Cd, Pb 및 Zn 등은 국내 및 미국환경청 음용수 기준을 초과하며 광산배수의 영향을 받은 결과로 해석된다. 실내 회분식 시험 결과 원소들은 농도가 급격히 감소하는 것과 비교적 일정한 농도를 보이는 두 가지 양상을 보였으며 이는 일부 원소들이 평형농도에 도달하고 있기 때문으로 생각된다 회분식 시험에 사용한 증류수의 평균 pH는 6.5∼7.0의 범위로 이를 pH 4로 조정한 결과 원소들의 용출량이 급격히 증가하였다. 본 지역의 잔류광미는 지속적으로 주변의 지하수와 토양을 오염시킬 것으로 판단되며 이는 산성비등의 영향으로 인하여 급격히 증가할 것이다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권6호
• /
• pp.111-116
• /
• 2015

The soil sample obtained from shooting area contaminated with Pb, Cu, and Zn was investigated to determine the chemical forms of heavy metals with Tessier’s sequential extraction method, which is constituted of five fractions such as ‘exchangeable’, ‘bound to carbonate’, ‘bound to oxide’, ‘bound to organic matter’, and residual fractions. The amount of organic matter was measured by loss on ignition (LOI) and then the results of ‘bound to organic matter’ and LOI were compared. The sequential extraction results show that 4.7%-45% of Pb, 6.2%-25.9% of Cu and 3.9%-15.3% of Zn belong to the ‘bound to organic matter’ fraction, but LOI result shows that only 1.0%-2.8% of organic matter exists in the soil sample. In heavy medium separation tests, because Pb and Cu extracted in ‘bound to organic matter’ and residual fractions were removed, the heavy metals in the fractions would exist as heavier forms. These results suggest that the part of heavy metal extracted in ‘bound to organic matter’ fraction would result from the oxidation of metallic forms by hydrogen peroxide and nitric acid used in the fraction, and, consequently, that the ‘bound to organic matter’ fraction should be investigated in detail to determine the removal method and treatment capacity when the Tessier’s sequential extraction method is used to examine heavy metal contaminants resulted from elemental metal like bullets.

• 자원리싸이클링
• /
• 제11권1호
• /
• pp.9-18
• /
• 2002

폐 컴퓨터 기판(Printed Wiring Boards, PWBs)은 다양한 종류의 금속 및 합금류, 각종의 유기 및 무기화합물 등으로 구성되어 있다. 따라서 폐 기판에 포함된 유가물을 경제적인 방법으로 분리 회수하면 2차 자원으로써 활용가치가 매우 클 것으로 판단되어, 물리적인 선별기술에 의하여 유가금속을 분리 회수하는 데에 따른 특성 연구를 행하였다. 본 연구에는 폐 컴퓨터 기판에 탑재된 소켓류와 칩류를 탈리한 다음 소켓류, 칩류 및 보드류로 분리하여 각각의 산출물의 특성에 따른 적절한 물리적 분리선별 기술을 적용하였다. 소켓류를 파쇄하여 입자크기를 -2.36 mm/+1.18 mm 범위로 조절한 다음 건식 자력선별을 실시하였을 때, 자성산물의 약 97 wt%가 금속류였다. 칩류의 경우에는 -2.36 mm1+0.15 nun의 크기로 분쇄하고 공기분급 및 건 식 자력선별을 행하여 Fe-Ni 97%, Cu 95%를 각각 회수할 수 있었다. 보드류의 경우에는 금속류가 얇게 프린트 된 상태이기 때문에 가능한 단체분리 효과를 향상시키기 위하여 ball mill로 분쇄하였으며, 공기 분급기에 의한 정밀 분급을 행하여 Cu 77%를 회수할 수 있었다.

• 한국물환경학회지
• /
• 제25권6호
• /
• pp.979-983
• /
• 2009

The mean pH of wastewater discharged from the plating process is 2, so a less amount of alkali is required to raise pH 2 to 5. In addition, if sodium sulfite is used to raise pH 5 to 9 in the secondary treatment, caustic soda or slaked lime is not necessary or only a small amount is necessary because sodium sulfite is alkali. Thus, it is considered desirable to use only $FeSO_4{\cdot}7H_2O$ in the primary treatment. At that time, the free cyanide removal rate was highest as around 99.3%, and among heavy metals, Ni showed the highest removal rate as around 92%, but zinc and chrome showed a low removal rate. In addition, the optimal amount of $FeSO_4{\cdot}7H_2O$ was 0.3g/L, at which the cyanide removal rate was highest. Besides, the free cyanide removal rate was highest when pH value was 5. Of cyanide removed in the primary treatment, the largest part was removed through the precipitation of ferric ferrocyanide: $[Fe_4(Fe(CN)_6]_3$, and the rest was precipitated and removed through the production of $Cu_2[Fe(CN)_6]$, $Ni_2[Fe(CN)_6]$, CuCN, etc. Furthermore, it appeared more effective in removing residual cyanide in wastewater to mix $Na_2SO_3$ and $Na_2S_2O_5$ at an optimal ratio and put the mixture than to put them separately, and the optimal weight ratio of $Na_2SO_3$ to $Na_2S_2O_5$ was 1:2, at which the oxidative decomposition of residual cyanide was the most active. However, further research is required on the simultaneous removal of heavy metals such as chrome and zinc.

• 한국버섯학회지
• /
• 제18권4호
• /
• pp.387-392
• /
• 2020

국내 유통 중인 건조 목이 8건(국내산 3건, 중국산 5건)을 수집하여 잔류농약 321종, 중금속 7종, 방사능 3종의 유해물질 잔류성분을 조사하였다. 잔류농약 검사결과 국내산 3건에서는 검출되지 않았으나, 중국산 5건 중 4건에서 Chlorpyrifos, Isoprocarb, Mepiquat chloride, Carbendazim이 검출되었다. 농산물 농약 잔류허용기준에 의하면 목이는 Mepiquat chloride(0.5 mg/kg 이하)만 기준치가 설정되어 있다. 또한 중금속 검사결과는 모든 건조 목이에서 미량의 중금속이 검출되었으나, 기준치 이하로 낮게 나타났다. 다만 국내산 시료 1건에서 납 함량이 기준치(0.3 mg/kg)보다 높게 나타나 정확한 원인 규명을 위해서는 톱밥배지, 지하수, 보관·유통 과정에 대한 추가적인 조사가 필요할 것으로 보여진다. 방사능 조사결과에서는 모든 건조 목이에서 방사능 농도가 MDA값 이하로 불검출 수준으로 나타났다. 국내산과 중국산의 평균 방사능 농도는 요오드(131I)와 세슘(134Cs)은 비슷한 수준으로 나타났으며, 세슘(137Cs)은 국내산보다 중국산에서 다소 높게 나타났다. 방사성 세슘(137Cs)은 버섯류에 잘 농축되는 것으로 알려져 있는데 이번 조사에서는 국내 유통 중인 건조 목이는 방사능에 안전하게 나타났다.