• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.31 no.3
• /
• pp.243-248
• /
• 2009

Purpose: Rehabilitation of the edentulous posterior maxilla with dental implants often poses difficulty because of insufficient bone volume caused by pneumatization of the maxillary sinus and by crestal bone resorption. Sinus grafting technique was developed to increase the vertical height to overcome this problem. The present study was designed to evaluate the sinus floor augmentation with anorganic bovine bone (Bio-$cera^{TM}$) using histomorphometric and clinical measures. Patients and methods: Thirteen patients were involved in this study and underwent total 14 sinus lift procedures. Residual bone height was ${\geq}2mm$ and ${\leq}6mm$. Lateral window approach was used, with grafting using Bio-$cera^{TM}$ only(n=1) or mixed with autogenous bone from ramus and/or maxillary tuberosity(n=13). After 6 months of healing, implant sites were created with 3mm diameter trephine and biopsies taken for histomorphometric analysis. The parameters assessed were area fraction of new bone, graft material and connective tissue. Immediate and 6 months after grafting surgery, and 6 months after implantation, computed tomography (CT) was taken and the sinus graft was evaluated morphometric analysis. After implant installation at the grafted area, the clinical outcome was checked. Results: Histomorphometry was done in ten patients.Bio-$cera^{TM}$ particles were surrounded by newly formed bone. The graft particles and newly formed bone were surrounded by connective tissue including small capillaries in some fields. Imaging processing revealed $24.86{\pm}7.59%$ of new bone, $38.20{\pm}13.19%$ connective tissue, and $36.92{\pm}14.51%$ of remaining Bio-$cera^{TM}$ particles. All grafted sites received an implant, and in all cases sufficient bone height was achieved to install implants. The increase in ridge height was about $15.9{\pm}1.8mm$ immediately after operation (from 13mm to 19mm). After 6 months operation, ridge height was reduced about $11.5{\pm}13.5%$. After implant installation, average marginal bone loss after 6 months was $0.3{\pm}0.15mm$. Conclusion: Bio-$cera^{TM}$ showed new bone formation similar with Bio-$Oss^{(R)}$ histomorphometrically and appeared to be an effective bone substitute in maxillary sinus augmentation procedure with the residual bone height from 2 to 6mm.

• Clinical and Experimental Pediatrics
• /
• v.46 no.3
• /
• pp.259-264
• /
• 2003

Purpose : We have performed an analysis on patients who received Rastelli operation in our institute and reviewed their progress postoperatively. Various factors with suspected relationship to the outcome have been considered to help in future treatment and follow-up. Methods : We analyzed retrospectively 43 patients who either received Rastelli operation in Yonsei University Cardiovascular Center from March 1995 to April 1997 or who received post-procedural cardiac catheterization and follow-up echocardiography in the out-patient department after the procedure. Results : No statistically valid relationships were found between the age of the patient, their body weight, preoperative pulmonary arterial index and pressure, presence of pulmonary branchial stenosis and postoperative results. Cases with atrioventricular concordance showed lower age and body weight, and discordant cases exhibited lower ejection fraction 3 days postoperatively. Upon follow up, lower NYHA score was seen in patients with severe residual stenosis. In the group that received cardiac catheterization after the procedure, residual stenosis and right ventricular pressure measurement in echocardiography showed good correlation with the catheterization data. Conclusion : In cases where conduit insertions of the right ventricular outflow tract are required to achieve total correction in complex cardiac deformity, early operation does not seem to provide a clear risk to the patient. In patients with atrioventricular discordance, careful postoperative observation of the ventricular function seems to be needed. Also, echocardiography appears to be a sound method in follow-up of patients after the correctional procedure.

• Economic and Environmental Geology
• /
• v.43 no.2
• /
• pp.123-136
• /
• 2010

In order to remediate heavy metal contaminated Nong island, Maehyang-ri shooting range soils through the batch reactor scale washing were evaluated. The experiment texture soil of N3 in the Nong island at north side incline was (g)mS containing 12.9% gravel, 47.0% sand, 35.1% silt and 5.0% clay. And the N3 soil area was contaminated with Cd($22.5\pm1.9$ ppm), Cu($35.5\pm4.0$ ppm), Pb($1,279.0\pm5.1$ ppm) and Zn($403.4\pm9.8$ ppm). The EDTA(ethylene diamine tetra acetic acid, $C_{10}H_{16}N_2O_8$) in the N3 soil was observed as most effective extractants among the 5 extractants(citric acid, EDTA, phosphoric acid, potassium phosphate and oxalic acid) tested. And chemical partitioning of heavy metals after washing N3 soil with EDTA was evaluated. Removal efficiency of residual fractions was higher than that of non-residual fractions. To choose EDTA extractant which is the most effective in soil washing technology using batch reactor process cleaning Pb and Zn contaminated sits; Pb and Zn removal rates were investigated 92.4%, 94.0% removal(1,000 mM, soil:solution=5, $20^{\circ}C$, 24 hour shaking, pH=2, 200 RPM), respectively. The results of the batch test showed that the removal efficiency curve was logarithmic in soil was removal. Thus, EDTA washing process can be applied to remediate the Pb and Zn contaminated soil used in this study.

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.281-295
• /
• 2010

This paper deals with magnetic susceptibility, mineralogy, soil properties (pH, EC, CEC, loss on ignition), iron and manganese oxides, the content and partitioning of heavy metals (As, Cd, Cr, Cu, Ni, Pb, Zn), and their mutual relationship in the soil samples of an unpolluted, abandoned mine area, and industrial complex area. The various minerals derived from weathered bedrock were identified by X-ray diffraction in the unpolluted soil samples, except for the magnetic minerals. XRD analysis also revealed the existence of hematite and magnetite related to mine tailings and waste rocks in the abandoned mine area samples. The industrial complex area samples had carbonate minerals, such as calcite and dolomite, that might be due to anthropogenic deposition. The sum of the reducible, oxidizable, and residual fractions was over 80% for the abandoned mine area samples and over 50% for the industrial complex area samples using the sequential extraction method. The industrial complex area samples had a relatively high carbonate fraction that was associated with carbonate minerals. The content of aqua regia-extractable Fe, Mn, As, and Zn had a high positive correlation with the content of the dithionite-citrate-bicarbonate (DCB)-extractable method related to Fe/Mn oxide phases. The 54% and 58% of aqua regia-extractable Fe and As content, respectively, acted together with the concentrations of the DCB-extractable phases. Magnetic susceptibility values of total samples ranged from 0.005 to $2.131{\times}10^{-6}m^3kg^{-1}$. The samples including iron oxide minerals, such as hematite and magnetite, had a high magnetic susceptibility. The magnetic susceptibility showed a significant correlation with the heavy metals, Cd (r=0.544, p<0.05), Cr (r=0.714, p<0.01), Ni (r=0.645, p<0.05), Pb (r=0.703, p<0.01), and Zn (r=0.496, p<0.01), as well as Fe (r=0.608, p<0.01) and Mn (r=0.615, p<0.01). The aqua regia-extractable Fe and Mn content had a significant positive correlation with Cd, Cr, Cu, Ni, and Zn. However, the DCB-extractable Fe and Mn content had a significant positive correlation with As and Ni, indicating that the heavy metals were associated with Fe and Mn oxide minerals.

• Journal of Chest Surgery
• /
• v.36 no.9
• /
• pp.646-650
• /
• 2003

Many surgical techniques for ischemic mitral regurgitation (IMR) have been used with their excellent results and advantages. Here, we report our simple posterior annuloplasty techniques using vascular graft strip with their early results. Material and Method: Twenty two patients (13 male) underwent the operations for IMR (excluding the papillary muscle rupture) from December 2001 to January 2003. Preoperative risk factors were low ejection fraction (<35％, n=9), hypertension (n=13), diabetes (n=9), and renal failure (Cr>2.5, n=4). The wide dissection beneath the both vena cavae and interatrial groove after bicaval cannulation enabled the easy exposure of mitral valve even in the small left atrium. After eight or nine interrupted sutures in posterior annulus for anchoring the 6 mm width vascular graft strip, symmetric (n=8) or asymmetric (n=14) annuloplasty were done. Combined surgeries were CABG (n=21), Dor procedures (n=3), tricuspid valve annuloplasty (n=1), Maze operation (n=1), and aorto-right subclavian artery bypass (n=1). Result: Except for one surgical mortality, all the patients were doing well and the mean grade of regurgitation was decreased from 2.95 to 0.88, however the ejection fraction had not changed significantly just before discharge. Post-operative valve function evaluated before discharge revealed no residual regurgitation in 8 (including 1 patient with mild stenosis due to over reduction), minimal in 11, mild in 2, and mild to moderate regurgitation in 1. One patient who had ischemic cardiomyopathy and renal failure died of the arrhythmia during the hemodialysis. Conclusion: These observations suggest that the annuloplasty with vascular graft strip could be a safe and cost effective techniques for ischemic mitral regurgitation. However, the long term evaluation for the mitral valve function should be defined for the final conclusion.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.1
• /
• pp.39-52
• /
• 2007

Quantitative analysis on release behavior of the $^{85}Kr\;and\;^{14}C$ fission gases from the spent fuel material during the voloxidation and OREOX process has been performed. This thermal treatment step in a remote fabrication process to fabricate the dry-processed fuel from spent fuel has been used to obtain a fine powder The fractional release percent of fission gases from spent fuel materials with burn-up ranges from 27,000 MWd/tU to 65,000 MWd/tU have been evaluated by comparing the measured data with these initial inventories calculated by ORIGEN code. The release characteristics of $^{85}Kr\;and\;^{14}C$ fission gases during the voloxidation process at $500^{\circ}C$ seem to be closely linked to the degree of conversion efficiency of $UO_2\;to\;U_3O_8$ powder, and it is thus interpreted that the release from grain-boundary would be dominated during this step. The high release fraction of the fission gas from an oxidized powder during the OREOX process would be due to increase both in the gas diffusion at a temperature of $500^{\circ}C$ in a reduction step and in U atom mobility by the reduction. Therefore, it is believed that the fission gases release inventories in the OREOX step come from the inter-grain and inter-grain on $UO_2$ matrix. It is shown that the release fraction of $^{85}Kr\;and\;^{14}C$ fission gases during the voloxidation step would be increased as fuel burn-up increases, ranging from 6 to 12%, and a residual fission gas would completely be removed during the OREOX step. It seems that more effective treatment conditions for a removal of volatile fission gas are of powder formation by the oxidation in advance than the reduction of spent fuel at the higher temperature.

• Korean Journal of Environmental Agriculture
• /
• v.35 no.2
• /
• pp.152-157
• /
• 2016

BACKGROUND: Since bottom ash (BA) contains considerable amounts of CaO and MgO, it could be a useful amendment to increase soil pH and to immobilize cadmium (Cd). This study was conducted to evaluate effect of BA application in reducing Cd phytoavailability.METHODS AND RESULTS: Bottom ash was applied at the rate of 0, 20, 40, and 80 Mg/ha to Cd contaminated soil, and then lettuce was cultivated under field condition. soil pH and net negative charge increased slightly with increasing BA application; however, there was no statistical difference among the rates. Water soluble, exchangeable+acidic, reducible, and oxidizable fraction of Cd decreased with increasing bottom ash application rate, whereas residual fraction of Cd increased with increasing bottom ash application rate. Lettuce yield increased with rate of bottom ash up to 40 kg/ha. Visual evidences of cadmium toxicity and growth inhibition were not found during lettuce cultivation.CONCLUSION: Bottom ash was effective to reduce phytoextractability of Cd and to increase lettuce yield. Conclusively, BA could be a good soil amendment to reduce Cd phytoavailability in contaminated arable soil.

• Economic and Environmental Geology
• /
• v.39 no.1 s.176
• /
• pp.63-74
• /
• 2006

In order to identify the Pb pollution and its sources in continental shelf and slope areas, Pb concentration and Pb isotope ratios ($^{207}Pb/^{206}Pb\;and\;^{208}Pb/^{206}Pb$) were determined far 6 box corer sediments collected from the southern East/japan Sea. Pb concentration, and $^{207}Pb/^{206}Pb\;and\;^{208}Pb/^{206}Pb$ ratios were constant at around $25\pm5 ppm$ and 0.842 and 2.092 from 1700 to 1930 year, respectively and increased steadily up to $40\pm5 ppm$ and 0.867 and 2.123 at the beginning of 1990s', respectively. The increase of concentration and isotope ratios in the labile fraction (leached by 2M HC1+0.5M $HNO_3$) explains their increase in bulk sediments, while Pb concentration and isotope ratios in the residual fraction were nearly constant during 300yrs. Temporal variation of Pb isotope ratios was explained by simple two end-members mixing of geo-genic and anthropogenic sources because isotope ratios and the inverse of Pb concentration showed the good linear relationships. Using Pb isotope ratios, we can constrain two Pb sources in the study area. The one is atmospheric particulates, compared with mean values of isotope ratios in atmospheric particulates collected at Jeju and Oki ;stands, based on the history of Pb emmission in Korea and China, and judged by oceanographic processes capable of homogenizing many sources. The other is local sources related to iron mills, refineries of Pb ore and of petroleum located at the coast of the study area. Isotope ratios of anthropogenic Pb can be estimated using two end-members mixing equation and were $0.879\pm0.005\;and\;2.144\pm0.008$ before 1950s' while they increased up to $0.900\pm0.008\;and\;2.162\pm0.011$ after 1980s', respectively.

• Applied Biological Chemistry
• /
• v.15 no.2
• /
• pp.111-142
• /
• 1972

An experimental Chung-Kook-Jang was prepared using the strain Bacillus subtilis sp. isolated by the author Samples were taken in 12 hrs interval during the fermentation and the oligopeptides were separated by the method of molecular sieving using the ion exchange resin column of Dowex-50. Only the X-16 fraction of oligopeptides was taken and the components of oligopeptides were developed in two dimensional thin layer chromatograms. The each peptide spot was eluted and each peptide was isolated. The pattern and kinds of amino acids, and N and C-terminal amino acids were studied. Fourteen different oligopeptides could be detected by the two dimensional thin layer chromatography, all of which were consisted of $4{\sim}9$ kinds of amino acids. No dipeptides and no tripeptides could be found. The N and C-terminal amino acids and the residual component amino acids of all these 14 peptides could be summarized as the follows. [P]-I. Pro (Cys Ala Asp Trp Ile Val) Glu [P]-II. Val (His Arg Glu Thr Ala Met) Asp [P]-III. Glu (Cys Lys Asp Thr Met) Ala [P]-IV. Glu(His Ser Ala) Met) [P]-V. Ile (Cys Asp Arg Gly Pro T.p Phe) His [P]-VI. Gly(Asp ser) Lys [P]-VII. Thr(Pro Tyr Phe) Asp [P]-VIII. Phe(Tyr Leu Ile) Val [P]-IX. Trp (Phelle) Thr [P]-X. Ile (Arg Leu) Phe [P]-XI. Asp (Lys His Ser Gly Glu Pro) Ala [P]-XII. Glu (Cys Asp Gly) Ser [P]-XIII. Ala (Arg Tyr) Glu [P]-XIV. Met (Glu Ala) His It appears that the protease of the Bacillus subtilis K-27 syrain has rather wider range of specificity than proteases of Aspergoillus soya, pepsin, chymotrypsin, and trypsin.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.906-914
• /
• 1994

Plastic behavior of two-phase intermetallic compounds based on $LI_{2}$-type $(Al, Cr)_3$ Ti was investigated using compression test at R.T. and 77K. $LI_{2}$ single phase alloys and two-phase alloys consisting of mainly $LI_{2}$ phase and a few or 20% second phases were selected from AI-Ti-Cr phase diagram. In general, compared with Llz single phase, two-phase alloys consisting of 20% second phase showed relatively high yield strength and poor ductility. Among the alloys, however, AI-21Ti-23Cr alloy consisting of 20% $Cr_{2}Al$ phase showed available ductility as well as high yield strength. Plastic behavior of $LI_{2}$ single phase alloys and two-phase alloys consisting of a few% $Cr_{2}Al$ was also investigated. Homogenization of arc melted ingots substantially reduced the amount of second phases but introduced extensive pore. When Cr content increased in $Ll_{2}$ single phase alloys after the homogenization, the volume fraction of pore in the alloys decreased, and no residual pore was observed in two-phase alloys consisting of a few% $Cr_{2}Al$ phase. Environmental effect on the ductility of the alloys was investigated using compression test at different strain rates($1.2 \times 10^{-4}/s$ and $1.2 \times 10^{-2}/s$). Environmental embrittlement was least significant in A1-25Ti-10Cr alloy consisting of LIZ single phase among the alloys tested in this study. However, based on the combined estimation of the pore formation, environmental embrittlement and ingot cast structure, AI-21Ti-23Cr alloy consisting of 20% $Cr_{2}Al$ as the second phase is expected to show the best tensile elongation behavior.