• Journal of Magnetics
• /
• 제18권3호
• /
• pp.326-330
• /
• 2013

Magnetic treatment of surface vessels and submarines (Deperm) is required to camouflage them against magnetic detection from enemy marine force. So far, deperm has been accomplished by applying an alternating magnetic field of which amplitude decreases linearly. However, the reduction of the residual flux density in the direction of magnetic field is not linear in the case of the linear protocol, since the ferromagnetic material used to construct a surface vessel, mainly Fe-C, shows a nonlinear behavior in an alternating magnetic field. This is one of main reasons to make an ordinary deperm protocol inefficient. In this paper, we propose the exponential deperming protocol and compare the exponential protocol to conventional linear protocol within the framework of deperm performance. We found out that step number could be reduced in the exponential protocol compare with in the linear protocol, because the larger numbers of deperm steps are dedicated in the irreversible domain process region on the magnetic hysteresis.

• Nuclear Engineering and Technology
• /
• 제53권8호
• /
• pp.2610-2615
• /
• 2021

The prediction of irradiation-induced transition temperature shift for RPV steels is an important method for long term operation of nuclear power plant. Based on the irradiation embrittlement data, an irradiation-induced transition temperature shift prediction model is developed with machine learning method XGBoost. Then the residual, standard deviation and predicted value vs. measured value analysis are conducted to analyze the accuracy of this model. At last, Cu content threshold and saturation values analysis, temperature dependence, Ni/Cu dependence and flux effect are given to verify the reliability. Those results show that the prediction model developed with XGBoost has high accuracy for predicting the irradiation embrittlement trend of RPV steel. The prediction results are consistent with the current understanding of RPV embrittlement mechanism.

• 한국해안·해양공학회논문집
• /
• 제26권4호
• /
• pp.253-266
• /
• 2014

광양만 권역의 해수 순환 양상과 섬진강 하천수 유입으로 발생하는 밀도류 이동 양상을 3차원 수치모델링 실험을 통해 연구하였다. $120m^3/s$의 섬진강 연평균 유량을 부과하여 실험을 진행하였다. 조위와 유속장, 염분장에 대해 각각 스킬분석(skill analysis)을 이용하여 모델을 검증하였으며, 그 결과 대부분 90%가 넘는 재현율을 보였다. 모델은 조류, 담수유입에 의한 염분장의 변화를 잘 재현하였다. 창낙조시의 유속장의 분포는 1~2.5 m/s의 범위를 보였다. 특히 노량과 대방, 그리고 창선수로에서 2.0 m/s 이상의 강한 흐름이 발생하는 것으로 나타났다. 지형적 요인에 의해 좌우되는 조석잔차류의 크기는 1~21 cm/s의 범위를 보였고, 섬진강 담수 유입으로 인해 형성된 표층의 밀도류는 여수해만으로 진행하는 12 cm/s의 이하의 남향류와 노량수로로 진행하는 4 cm/s 이하의 동향류가 발생한다. 특히 여수해만에서의 밀도류 흐름은 서쪽 해안에 편향되어 남하하는 양상을 보였다. 모델 내 경계면에서의 체적 수송량과 밀도류 분포를 분석한 결과, 평수기시 섬진강으로부터 광양만 권역에 유입된 담수는 $97.4m^3/s$ (81.5%)가 여수해만으로 유입되며 $22.1m^3/s$ (18.5%)가 진주만으로 유입되는 양상을 보였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.51-51
• /
• 2010

Recently just as in the automobile industry, shipbuilders also try to reduce material consumption and weight in order to keep operating costs as low as possible and improve the speed of production. Naturally industry is ever searching for welding techniques offering higher power, higher productivity and a better quality. Therefore it is important to have a details research based on the various welding process applied to steel and other materials, and to have the ability both to counsel interested companies and to evaluate the feasibility of implementation of this process. Submerged-arc welding (SAW) process is usually used about 20% of shipbuilding. Similar to gas metal arc welding(GMAW), SAW involves formation of an arc between a continuously-fed bare wire electrode and the work-piece. The process uses a flux to generate protective gases and slag, and to add alloying elements to the weld pool and a shielding gas is not required. Prior to welding, a thin layer of flux powder is placed on the work-piece surface. The arc moves along the joint line and as it does so, excess flux is recycled via a hopper. Remaining fused slag layers can be easily removed after welding. As the arc is completely covered by the flux layer, heat loss is extremely low. This produces a thermal efficiency as high as 60% (compared with 25% for manual metal arc). SAW process offers many advantages compared to conventional CO2 welding process. The main advantages of SAW are higher welding speed, facility of workers, less deformation and better than bead shape & strength of welded joint because there is no visible arc light, welding is spatter-free, fully-mechanized or automatic process, high travel speed, and depth of penetration and chemical composition of the deposited weld metal. However it is difficult to application of thin plate according to high heat input. So this paper has been focused on application of the field according to SAW process for thin plate in ship-structures. For this purpose, It has been decided to optimized welding condition by experiments, relationship between welding parameters and bead shapes, mechanical test such as tensile and bending. Also finite element(FE) based numerical comparison of thermal history and welding residual stress in A-grade 3.2 thickness steel of SAW been made in this study. From the result of this study, It makes substantial saving of time and manufacturing cost and raises the quality of product.

• 한국지구과학회지
• /
• 제21권2호
• /
• pp.128-136
• /
• 2000

반폐쇄된 무안만에서 동계와 하계 동안 부유물질의 변동 및 이동양상을 규명하기 위해 염분과 조류, 부유물질의 특성이 조사되었다. 무안만에서 부유물질 함량은 계절적으로 크게 변하여 동계에 낮고 수직적으로 균질한 반면, 하계에 높고 수직적으로 성층화되는 경향을 보였다. 특히, 하계에는 영산강하구언의 갑문조작에 따라 유입되는 담수와 부유물질이 남쪽을 따라 흐르던 연안류가 약화되면서 북측으로 확산되는 경향을 보였다. 또한, 부유물질의 잔여이동은 서측 만입구에서는 하구언과 방조제 건설에 따라 창조류의 지속시간이 길어지면서 계절에 무관하게 만 내로 유입되는 경향을 보인 반면, 남측 만입구에서는 낙조우세와 서측 만입구에서 조석의 비대칭 현상에 의해 만 외부로 유출되는 경향을 보인다. 부유물질의 잔여이동량은 서측 만입구에서 0.0078kg/m ${\cdot}$ sec, 남측 만입구에서 -0.0955kg/m ${\cdot}$ sec로 무안만이 전반적으로 침식되는 경향을 보였으며, 이와 같은 침식현상은 만 내의 조간대를 중심으로 진행된 것으로 여겨진다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.7-7
• /
• 2000

A high $T_c$ SQUID system is developed for the application to biological immunoassay. In this application, magnetic nanoparticles are used as magnetic markers to perform immunoassay, i.e., to detect binding reaction between an antigen and its antibody. The antibody is labeled with ${\gamma}-Fe_2O_3\;(or\;Fe_3O_4)$ nanoparticles, and the binding reaction can be magnetically detected by measuring the magnetic field from the nanoparticles. Design and set up of the system is described. The system consists of (1) SQUID magnetometer or gradiometer made of 30-deg. bicrystal junctions, (2) field and compensation coils to apply the magnetic field of about 1 mT, (3) special Dewar to realize a 2 mm-distance between the SQUID and the sample, (4) two layers of cylindrical shielding to reduce the extemal magnetic noise to about 1/100, and (5) an electric slider to move the sample with a speed of 10 mm/sec. The sensitivity of the system is studied in terms of detectable magnetic flux. For the measurement bandwidth from 0.2 Hz to 10 Hz, minimum-detectable amplitude of the magnetic flux is $0.8\;m\;{\Phi}_o$ and $0.25\;m{\Phi}_o$ for the magnetometer and the gradiometer, respectively, when the magnetic field of 1 mT is applied. The difference between them is due to the residual environmental noise, and the applied magnetic field does not increase the system noise. The corresponding weight of the magnetic markers is 1 ng and 310 pg, respectively. An experiment is also conducted to measure antigen-antibody reaction with the present system. It is shown that the sensitivity of the present system is 10 times better than that of the conventional method using an optical marker. A one order of magnitude improvement of sensitivity will be realized by the sophistication of the present system.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.231-238
• /
• 2005

본 연구에서는 유동저항이론을 기초로 하여 연속다공체, 분리단열망 및 연속다공체-분리단열망 공존암반과 같은 3가지 암반을 대상으로 암반 특성에 따른 지하수 유동저항 개념 모델링 및 관계식을 제안하였다. 정상상태조건에서 밀도변동은 고려하지 않았으며 유한 체적법을 이용하였다. 각종 물성치는 블록 중심에서 정의되고, flux는 블록면에서 정의되는 staggered 격자 체계하에서 모든 블록에 대해 Darcy 법칙이 적용되었다. 접촉면에서의 투수계수는 인접면 중심에서 정의된 물성치의 조화평균값을 사용하였다. 유동저항개념을 이용하여 인접한 블록간의 상대압력차와 flux의 관계를 표현하였다. 개개의 단열에서의 유동은 다공암반에서 이용된 방정식과 동일한 형태의 2차원 방정식으로 모사되었다. 본 논문에서 제안된 모델은 추후 다양한 암반 특성별 유동 모사 기법을 개발하는데 많은 기여를 할 것으로 기대된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.125-125
• /
• 2023

Estuarine dams are dams constructed in estuaries for reasons such as securing freshwater resources, controlling water levels, and hydroelectric power generation. These estuarine dams alter the flow of freshwater to the coastal ocean and the tidal properties of the estuaries which has implications for the estuaries' circulation and sediment transport. A previous study has analyzed the effect of estuarine dams on 1D (along-channel) circulation and sediment transport. However, the effect of estuarine dams on the transverse variability of along-channel and across-channel circulation and sediment transport has not been studied and is not known. In this study, a coupled hydrodynamic-sediment dynamic numerical model (COAWST) was used to analyze the transverse variability of along-channel and across-channel flow and sediment transport in estuaries with estuarine dams. The estuarine dam was found to change the 3D structure of circulation and sediment transport, and the result was found to depend on the estuarine type (i.e., strongly stratified (SS) or well-mixed (WM) estuary). The SS estuary had inflow in the channel and outflow over the shoals, consistent with estuarine circulation. Longer discharge interval reduced the estuarine circulation. The WM estuary had inflow over the shoals and outflow in the channel, consistent with tide-induced circulation. As the estuarine dam was located nearer to the estuary mouth, the tide-induced circulation was reduced and replaced with estuarine circulation. The lateral circualtion was the greatest in the tide-dominated estuaries. It was reduced and changed direction due to differential advection change as the dam was located nearer the mouth. Overall, the WM estuary transverse flow structure changed the most. Lateral sediment flux was important in all estuaries, particularly for transporting sediments to the tidal flats.

• Membrane and Water Treatment
• /
• 제2권1호
• /
• pp.25-37
• /
• 2011

PES UF membranes containing silver were prepared to impart antibacterial properties for waste water treatment. Asymmetric membranes for antibacterial application were prepared from polyethersulfone (PES) and silver nitrate ($AgNO_3$) (PES/$AgNO_3$=15/2 by weight) solution in N-Methyl-2-pyrrolidone (NMP) via simple wet phase inversion technique. These membranes were characterized by polyvinylpyrrolidone (PVP) and polyethylene glycol (PEG) of different molecular weights (1000 ppm in water) at room temperature and on operating pressure of 5 bars. It was observed that the water flux of PES-$AgNO_3$ membrane is slightly lower than virgin PES but still increased linearly with the increment of pressure applied. The morphology of the resulting membranes was examined using Field-Emission Scanning Electron Microscope (FESEM) coupled with Energy Dispersive Spectroscopy (EDS). Elemental analysis using EDS proved that silver is successfully loaded on the membrane surfaces. Due to the success of loading silver on membrane surfaces, antibacterial activities were evaluated via agar diffusion method against Escherichia coli (E.coli) and Staphylococcus aureus (S.aureus) culture. By incorporating 2 wt% of silver nitrate, PES-$AgNO_3$ showed significant inhibition ring on both E.coli and S.aureus. Filtration of E.coli solution (OD 0.31) showed satisfactory rejection data with ~100% inhibition growth after 24 hours incubation at $37^{\circ}C$. Resultant membranes also exhibit better tensile strength (compared to virgin PES) up to 71% may be due to the suggested interactions. The residual silver during fabrication was measured using ICP-MS and result showed that the residual silver content of PES-$AgNO_3$ membrane was only ~1% of the original silver added in the polymer solution. These studies have shown that PES-$AgNO_3$ UF membranes are potential in improving the filtration in water treatment.

• Progress in Superconductivity
• /
• 제10권2호
• /
• pp.87-91
• /
• 2009

Fluorine-doped $SmFeAsO_{1-x}F_x$ single crystals with the nominal value of x=0.2 were grown at $1350-1450^{\circ}C$ under the pressure of 3.3 GPa by using the self-flux method. Plate-shaped single crystals in the range of a few-150 ${\mu}m$ in their lateral size were obtained. The detailed crystal structure was analyzed by using the x-ray diffractometry. Superconducting transition temperature, determined by the resistive transition, of a single crystal was about 49 K with a narrow resistive transition width of ${\sim}1$ K. A relatively sharp transition, a low residual resistivity, and a large residual resistivity ratio compared with those reported for $REFeAsO_{1-x}F_x$(RE=Sm, Nd) single crystals indicate the high quality of our single crystals.