• 한국건설순환자원학회논문집
• /
• 제8권2호
• /
• pp.212-218
• /
• 2020

이 연구의 목적은 초고성능 콘크리트의 폴리프로필렌 섬유 혼입량에 따른 폭렬 특성을 조사하는 것이다. 이를 위하여 섬유 혼입량이 다른 각각의 배합을 가열온도 900℃까지 가열한 후, 폭렬 성상, 잔존 압축강도 및 초음파 전달속도를 평가하였다. 실험 결과, 소량의 폴리프로필렌 섬유를 혼입하여도 폭렬 저항성능이 향상되는 것으로 나타났다. 폴리프로필렌 섬유를 0.4%이상 혼입하면 가열온도 900℃에서도 폭렬이 발생하지 않은 것으로 나타났다. 가열온도 900℃일 때, 잔존 압축강도는 상온 압축강도보다 48% 감소하고, 초음파 전달속도는 상온 전달속도보다 44% 감소하는 것으로 나타났다.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.217-225
• /
• 2020

In this study, the dyeing characteristics of nylon fabric which is dyed with supercritical fluid were investigated. There were two dyes used in the dyeing experiment: C.I. Disperse Red 167 and C.I. Disperse Violet 93. Dyeing temperature, pressure, and leveling time were fixed at 110℃, 250bar, 60minutes, and the experiment was conducted with dyeing concentration of 0.1, 0.3, 0.5, and 0.85% o.w.f. The analysis of the experimental results was found out through the measurement of washing fastness and color coordinate. In addition, the calibration curve of each dye was drawn up and the amount of remaining dye was checked by measuring the absorbance of the residual dye. As a result of color difference measurement, as the concentration increased, the L⁎ value decreased and the K/S value increased. However, the increase in K/S value compared to the amount of input decreased as the concentration increased. The comparative experiment on the amount of residual dye(C.I. Disperse Red 167) in the pot showed that 99.14% of the amount was dyed at the concentration of 0.1% o.w.f, while it rapidly decreased to 77% at 0.85% o.w.f. C.I. Disperse Violet 93 dye also decreased from 0.5% o.w.f to 93.91%. In the washing fastness experiment of both dyes, the level of washing fastness began to decrease from samples dyed at 0.5% o.w.f. It may be because the simply absorbed dye was produced instead of completely being fixed in the amorphous region of the nylon fiber.

• 현장농수산연구지
• /
• 제25권4호
• /
• pp.158-164
• /
• 2024

With the steady growth in the scale of the domestic traditional liquor industry, the interest in makgeolli has also been increasing. As the demand for makgeolli increases, interest in manufacturing differentiated makgeolli by adding additional raw materials such as fruits is increasing. In this study, makgeolli with low storage persimmon juice was manufactured, and the sweet taste of persimmon was imparted without adding sweeteners. Unsweetened, high-quality persimmon makgeolli with an alcohol content of 15% or more was manufactured and its quality characteristics were analyzed. Yeast was selected after producing fermented yeast by treating domestic isolated yeast and commercial yeast. Upon producing fermented yeast, persimmon makgeolli was manufactured by varying the amount of persimmon juice added to the fermented yeast. As a result of analyzing the quality characteristics of persimmon makgeolli, the pH was 4.02-4.25, the total acid (citric acid, %) was 0.30-0.43, the amino acidity (glycine, %) range was 0.05-0.15, and the alcohol content (%) was 15.64-18.48.(p<0.05). Reducing sugar (%) was 1.82-12.68 and total sugar (%) was 1.41-10.42, exhibiting a tendency to increase as the amount of reducing sugar and total sugar and the amount of juice added increased (p<0.05). Considering the sensory characteristics, a sample with 50% persimmon juice added showed a significantly higher residual sugar content, and the residual sugar content had a positive effect on the sensory characteristics. Therefore, 50% persimmon juice was added when making persimmon makgeolli. It is suitable for high-quality, non-sweetened persimmon makgeolli that preserves the taste of persimmon, which suits the consumers'taste.

• 한국염색가공학회지
• /
• 제34권2호
• /
• pp.93-101
• /
• 2022

In this study, the dyeing properties of supercritical fluid dyed cotton fabrics were investigated which use two types of dyes, such as C.I. Disperse orange and C.I. Disperse red 167. Dyeing temperature, pressure and leveling time were equally applied at 130 ℃, 250 bar, and 60 minutes with reference to the related literature, and experiments were performed at concentrations of 0.04, 0.1, 0.4 and 0.8 % o.w.f with different concentrations. Dyeability was confirmed through measurement of washing fastness and color coordinate, and a calibration curve of each dye was drawn up and the absorbance of the residual dye was measured to confirm the amount of residual dye and the dye exhaustion rate at the corresponding concentration. As a result of color difference measurement, as the concentration increased, the L^* value decreased and the K/S value increased. However, as the concentration increased, the increase in K/S value decreased compared to the input amount, and this tendency was more obvious in C.I. Disperse red 167 than in C.I. Disperse orange 155. The dye exhaustion rate which was calculated by using the amount of residual dye in the pot was also C.I. Disperse orange 155 was 96.16 % and C.I. Disperse red 167 was 94.57 %. However, as the dyeing concentration increased, the dye exhaustion rate decreased, that C.I. Disperse orange was 95.33 % and C.I. Disperse red 167 was 90.63 %. As a result of the washing fastness test for both dyes, dyed samples of which concentrations were 0.4 and 0.8 % o.w.f decreased by 0.5 ~ 1.0 grade. This is predicted because the dye did not completely adhere to the amorphous region of the cotton fiber and the dye simply adsorbed. The fastness to rubbing also maintained at least grade 3-4 up to the 0.1 % o.w.f concentration, but at the concentration of 0.4 % o.w.f or higher, it fell to grade 1 or lower, showing a very poor friction fastness.

• 분석과학
• /
• 제19권2호
• /
• pp.155-162
• /
• 2006

본 연구에서는 잔류농약을 효과적으로 제거하는 방법을 토양 및 수용액상에서 연구하였다. 이를 위해 표준물질은 유기염소계 ${\alpha}$-endosulfan, ${\beta}$-endosulfan을 사용하였다. 분석방법은 각각 채취한 시료를 전처리하여 Ultra II[$(30m{\times}0.25mm(ID){\times}0.25{\mu}m$] 컬럼을 장착한 GC-${\mu}$-electron capture detector(${\mu}$-ECD)로 분석하였다. 토양 중 잔류농약의 회수율은 96-100%로 나타났다. 토양에 농약분해제를 살포하여 시간별 ${\alpha}$-endosulfan, ${\beta}$-endosulfan의 변화량을 분석한 결과 73, 61% 감소하였다. 토양시료에 농약분해제를 첨가하고, 수분의 양을 10 mL에서 100 mL로 증가 시키면서, 잔류농약의 변화량을 측정하였다. 그 결과, ${\alpha}$-endosulfan은 45%에서 85 %로, ${\beta}$-endosulfan은 44%에서 88%로 제거되었다. 마지막으로, 수용액상에서도 시간별 endosulfan의 제거율 실험을 하였다. 실험 결과 30분 내에서 ${\alpha}$-endosulfan은 99%, ${\beta}$-endosulfan은 98%가 분해 제거되었다. 이와 같은 현상은 농약분해제에 많은 유기산염과 강알칼리 성분들이 알칼리 가수분해를 일으킨 것으로 추정할 수 있다.

• 한국안광학회지
• /
• 제10권4호
• /
• pp.255-259
• /
• 2005

난시 교정용 콘택트렌즈 착용 시 렌즈의 축 방향을 정확하게 하지 않을 경우이거나, 착용 후 순목 시 안검 등에 의해 콘택트렌즈가 회전할 경우가 있다. 이러한 현상이 있을 경우 완전교정상태가 잘못 교정된 상태로 되기 때문에 안정피로를 유발하여 시력의 저하를 가져올 수 있다. 이런 이유로 콘택트렌즈가 어느 정도 회전했는지의 파악이 필요하다. 콘택트렌즈가 회전했다면 착용 후 굴절검사에서 잔류 난시가 검출될 것이다. 이것을 이용해서 우리는 콘택트렌즈의 회전량을 계산하는 프로그램을 개발하였다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.293-297
• /
• 2000

Multiseeding with (100)/(100) grain junctions of top-seeded melt growth (TSMG) processed YBCO superconductors was studied. The effect of the number of seeds and the distance between two seeds on the levitation forces and the trapped magnetic fields of the TSMG-processed YBCO samples was investigated. Multiple seeding shortened the processing time for the fabrication of TSMC-processed YBCO superconductors. The large magnetic field was trapped at the grain junction when two seeds was placed without spacing, while the amount of the magnetic field decreased when the seed distance increased. This is attributed to the increased amount of the residual melt phases around the grain junctions.

• 전기의세계
• /
• 제21권6호
• /
• pp.17-20
• /
• 1972

The magnetic properties of Ba-Ferrite ( $M^{+2}$O.nF $e_{2}$ $O_{3}$ is highly improved under the condition of composition ratio n=4.4 when B $i_{2}$ $O_{3}$ is added to Ferrite, the adding amount and sintering temperature which affect the magnetic properties were investigated and the following results; were obtained; 1. Magnetic properties are varied with B $i_{2}$ $O_{3}$ content and singering temperature, and coercive force and residual induction can be improved with B $i_{2}$ $O_{3}$. 2. The optimal content of B $i_{2}$ $O_{3}$ amount is about 4 mol %, 3. Without the addition of B $i_{2}$ $O_{3}$, the optimal sintering temperature is about 1300.deg. C, but when 4 mol % of B $i_{2}$ $O_{3}$ is added, the optimal sintering temperature falls to the range of 900.deg. C to 1100.deg. C and it also improves magnetic properties. 4. Residual induction increases as the singering temperature is raised to 1100.deg. C. Coercive force also increased as the sintering temperature is raised to 1000.deg. C, but it rapidly decreases when sintering temperature goes beyond 1000.deg. C. 5. Only a negligible change may be noticed in the decrease of Curie temperature by the addition of about 4 mol % of B $i_{2}$ $O_{3}$.

• 한국표면공학회지
• /
• 제45권6호
• /
• pp.226-231
• /
• 2012

Characteristics of carburized surface layers in 0.18C-3.5Ni-1.5Cr-0.2Mo steels for main shaft bearings of wind turbines have been analyzed and evaluated before and after rolling contact fatigue tests. Mixed microstructure consisting of retained austenite and tempered martensite has been formed with compressive residual stresses in the surface hardened layers of the specimens showing uniform hardness distribution with value about Hv700 after vacuum carburizing and tempering. It has been found on the raceway of the layers of the specimens after rolling contact fatigue tests that the amount of retained austenite decreased and compressive residual stresses increased, resulting from cyclic contact stresses applied during the tests. It has been also revealed that higher durability of the bearings can be obtained through controlling the amount of the retained austenite in the surface of the bearing steels to be lower in this study.

• 한국항공우주학회지
• /
• 제43권1호
• /
• pp.62-71
• /
• 2015

정지궤도위성은 궤도상에서 위치변화를 제어하기 위해 추력기를 사용하고 운용수명에 맞추어 적정한 양의 액체추진제를 탑재한다. 그러므로 정지궤도위성의 수명은 추진제 잔여량에 좌우되고 정확한 잔여추진제량 측정은 조기 수명종료로 야기되는 경제적 손실을 완화시킬 뿐만 아니라 후속위성의 대체나 위성망 운용계획 등에 매우 중요하다. 잔여추진제량을 측정하는 방법은 주로 PVT 방법, 열질량법, 회계식 방법이 사용된다. 본 논문에서는 회계식방법을 사용하기 위한 천리안위성 이원추진시스템의 모델링과 몬테카를로 방법을 이용하여 천리안위성의 궤도전이 소요 추진제량을 분석하였다.