• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.237-242
• /
• 2022

In this study, a drying method that can effectively remove residual solvent from (+)-dihydromyricetin was developed. Residual acetone concentration was efficiently removed below ICH-specified value (5,000 ppm) by simple rotary evaporation with ethanol pretreatment. In addition, the residual ethanol met the ICH-specified value (5,000 ppm) by simple rotary evaporation through the addition of water, and the residual moisture also met the specified value (<4%) for active pharmaceutical ingredients. At all the drying temperature (35, 45, and 55 ℃), a large amount of the residual solvent was initially removed during the drying, and the drying efficiency increased when increasing the drying temperature. Removal of residual solvent by ethanol pretreatment was shown to be related to high vapor pressure of acetone-ethanol mixture and hydrogen bonding between acetone and ethanol.

• Structural Engineering and Mechanics
• /
• v.87 no.2
• /
• pp.151-164
• /
• 2023

The latest earthquake's costly repairs and economic disruption were brought on by excessive residual drift. Self-centering systems are one of the most efficient ways in the current generation of seismic resistance system to get rid of and reduce residual drift. The mechanics and behavior of the self-centering system in response to seismic forces were impacted by a number of important factors. The amount of post-tensioning (PT) force, which is often employed for the standing posture after an earthquake, is the first important component. The energy dissipater element is another one that has a significant impact on how the self-centering system behaves. Using the damper as a replaceable and affordable tool and fuse in self-centering frames has been recommended to boost energy absorption and dampening of structural systems during earthquakes. In this research, the self-centering steel moment frame connections are equipped with cushion flexural dampers (CFDs) as an energy dissipator system to increase energy absorption, post-yielding stiffness, and ease replacement after an earthquake. Also, it has been carefully considered how to reduce permanent deformations in the self-centering steel moment frames exposed to seismic loads while maintaining adequate stiffness, strength, and ductility. After confirming the FE model's findings with an earlier experimental PT connection, the behavior of the self-centering connection using CFD has been surveyed in this study. The FE modeling takes into account strands preloading as well as geometric and material nonlinearities. In addition to contact and sliding phenomena, gap opening and closing actions are included in the models. According to the findings, self-centering moment-resisting frames (SF-MRF) combined with CFD enhance post-yielding stiffness and energy absorption with the least amount of permeant deformation in a certain CFD thickness. The obtained findings demonstrate that the effective energy dissipation ratio (β), is increased to 0.25% while also lowering the residual drift to less than 0.5%. Also, this enhancement in the self-centering connection with CFD's seismic performance was attained with a respectable moment capacity to beam plastic moment capacity ratio.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.25-32
• /
• 2019

The influence of the contact amount of carbon dioxide per unit mass of dyestuff(${\alpha}$) on dyeing uniformity in supercritical fluid dyeing is analyzed in this study. The experiments using a 5L class Pilot Scale dyeing machine is carried out for this study purpose. For a fixed temperature and pressure, the amount of sample and the dyeing leveling time were considered as process variables. The results show that the increase in the amount of the sample causes a higher color difference than the reference sample, and it also increases the amount of residual dye. On the other hand, the color difference tended to decrease with the increase in dyeing time. Based on these results, the correlation between ${\alpha}$ value and dyeing uniformity in supercritical fluid dyeing is obtained.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.2
• /
• pp.113-118
• /
• 1991

The soil residual amount of herbicides nitralin and napropamide was determined in 6 winter crops field using a chemical assay method. Chemical analysis on soil residue revealed that a relatively high amount of nitralin was detected between 150 and 200 days after treament(DAT). However, regardless of soil types the residue at 220 DAT ranged from 0.053 to 0.141ppm and from 0.134 to 0.308ppm, at the rate of 75 and 150 g a.i./10a, respectively. The residue of napropamide applied at the rate of 75 g a.i./l0a ranged from 0.006 to 0.072ppm at 150 DAT, but not detectable at 220 DAT. When application rate increased to 150 g a.i./10a, napropamide residue was between 0.005 and 0.16ppm at 150 DAT and less than 0.004ppm at 200 DAT, and was not detected at 220 DAT, irrespective of soil types. The results of chemical analysis for the two herbicides showed a similar trend to those obtained from the experiments in agar medium and fields.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.2
• /
• pp.173-183
• /
• 2021

Objectives: This study evaluated the skin permeability of lawsone in henna hair dyes to understand the exposure characteristics of henna hair dyes in the human body. It examined the protective effects of protectants by applying protectants A, B, and C to test skin. Methods: Skin absorption tests were conducted using Franz diffusion cells according to OECD test guideline 428. After applying one kind of natural henna hair dye and chemical henna hair dye, respectively, to a standardized pig skin model, samples of receptor fluid were collected at 1h, 3h, 6h, and 24h. The skin permeation of lawsone was determined using HPLC. After the skin absorption experiment, the skin to which hair dye was applied was analyzed to determine the residual amount of lawsone in the skin. Results: The cumulative permeation of both natural and chemical henna hair dyes increased over time, and the natural henna hair dye had a flux value (t=3.194, p<.05) high both in the K_p value (t=3.207, p<.05) and the residual amount (t=22.701, p<.001). For skin treated with a protectant, the cumulative permeation of natural henna hair dye 24h control and the cumulative permeation of protectant A, B, and C increased over time. Flux and K_p values were in the order control > protectant A > protectant C > protectant B. The residual amount (F=4.469, p<.05) was in the order of protectant C > protectant A > protectant B > control. At 3h, the dye application time of natural henna hair dye, the lawsone flux value (F=4.454, p<.05) and K_p value (F=4.455, p<.05) were higher in the control group than in the protectant groups. The 24h cumulative permeation of the chemical henna hair dye increased with time in both the control and the protectant groups, and the flux and K_p values were in the order of protectant A > protectant C > protectant B > control. The residual amount (F=7.901, p<.01) was in the order of protectant B > protectant A> protectant C > control. Conclusions: Within the normal dyeing time for henna hair dye (three hours for natural henna hair dyes and 30 minutes for chemical henna hair dyes) lawsone skin penetration was not observed even when no protective agent was applied. After that time, however, evidence of skin penetration and retention of lawsone and the protective effect of protective agents were observed.

• The Korean Journal of Pesticide Science
• /
• v.3 no.2
• /
• pp.47-53
• /
• 1999

Photosensitizing activities of some photosensitizers (PS) for the artificial diminution of pesticide residues on horticultural crops were investigated. Five fungicides, iprodione, bitertanol, chlorothalonil, myclobutanil, and dichlofluanid were sprayed on apple and cucumber, followed by the application of each selected photosensitizer, and the samples were collected 0, 1, 3, 7, 15 days after the photosensitizer application and analyzed for the residual amounts. Of the 40 photosensitizers tested, six selected on the basis of the eliminating effect of pesticide residues were PS-1 (aromatic ketone), PS-2 (aromatic amine), PS-3 (quinone), PS-4 (inorganic compound), PS-5 (organic acid salt), and PS-6 (semiconductor photocatalyst). The residual amount of iprodione after 15 days of the application of PS-1 was 74% of that of the control. For bitertanol, the residual amount after 15 days of the application of PS-1 accounted for 78% of that of the control. The residual amounts of chlorothalonil after 1 day of the application of PS-1 and PS-2 accounted for 56 and 54% of those of the control, respectively. The residual amounts of iprodione on cucumber after 3 days of the application of the photosensitizers PS-1 and PS-2 were 44 and 67% of those of the untreated control, respectively. For myclobutanil, the residual amount after 15 days of the application of PS-6 accounted for 45% of that of the control. In case of dichlofluanid, the residual amount after 3 days of the application of PS-1 accounted for 44% of that of the control. Based on the results, PS-1 turned out to be the most promising photosensitizer for the accelerated photodegradation of the above fungicides on apple and cucumber.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.04a
• /
• pp.21-24
• /
• 2005

Three dimensional circular braided Glass/Aramid hybrid fabric/epoxy resin composite was fabricated. FBG sensor was embedded along the braid yam in order to monitor the internal dimensional changes of the 3-D braid composite. The amount of cure and thermal shrinkage of epoxy resin was also determined using FBG sensor system. FBG sensors with different grating length were embedded and their response were compared. The thermo-optic coefficient of FBG sensor was measured by several preliminary experiments. The internal strain that measured by FBG sensor and electric strain gauge was compared during compressive test. The released residual strain of the fabricated tubular composite was estimated using cutting method. The internal strain of the composite was estimated using FBG sensor system, and the result was compared with the value from electric strain gauge. It was found that FBG sensor system is a very useful technique to investigate inside region of complicated structure.

• The Journal of Internal Korean Medicine
• /
• v.1 no.1
• /
• pp.92-97
• /
• 1976

Upon feeding dried Ginseng to rats of either low-protein or high protein diet ethanol was administered intraperitoneally and disappearance rate blood alcohol was enzymatically measure. In terms of residual blood alcohol after a time lapse of 3.5 hours between intraperitonial administration and blood withdrawal neither ginseng nor ginseng plus 40% casein did improve the rate, of alcohol clearance but sexual difference was clearly demonstrated in favor of female rats. In the case of blood withdrawn only 2 hours after intraperitoneal injection of alcohol, the tendency of female superiority in alcohol clearance rate is demonstrated when a comparison is made among the groups fed with ginseng and this was particularly true is groups of rats fed with basal diet plus 1 percent ginseng residual blood ethanol being 15.4 mg/ml vs. 8.8 mg/ml. Liver homogenate alcohol dehydrogenase activity measured in terms of residual ethanol content after in vitro reaction on which a known amount of alcohol was added clearly demonstrated a male superiority in alcohol clearance.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.64-66
• /
• 2000

This paper presents an algorithm for detecting current transformer (CT). At the instants of beginning and end of saturation, the increment of the secondary current is reduced significantly, depending on the residual flux and saturation time. Thus, the third difference of the current is used to detect saturation in this paper. If the third difference is less than threshold the CT is at the beginning/end of saturation. The proposed detection method is unaffected by the amount of residual flux. The results of various tests with residual flux from -80% to +80% indicate satisfactory performance of the method.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.4
• /
• pp.189-195
• /
• 2017

In the seismic design of building structural members, due to the complexity of the placement of PC steels in prestressed concrete members, it is necessary to review and define the definition of member damage in comparison with reinforced concrete members. In this study, the results of past experiments compared with the calculation results by 'section Analysis Method', with the aim of reviewing the precision of calculation results when member damage evaluation is performed using the section analysis method. Furthermore, it is also compared with the calculation results by the 'split Element Method'. In addition, parametric studies were carried out, and the influence of the difference between the amount of PC steels and reinforced bar on the residual strain was examined.