• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.262.2-262.2
• /
• 2014

Plasma processing is an essential process for pattern etching and thin film deposition in nanoscale semiconductor device fabrication. It is necessary to maintain plasma chamber in steady-state in production. In this study, we determined plasma chamber state with residual gas analysis with self-plasma optical emission spectroscopy. Residual gas monitoring of fluorocarbon plasma etching chamber was performed with self-plasma optical emission spectroscopy (SPOES) and various chemical elements was identified with a SPOES system which is composed of small inductive coupled plasma chamber for glow discharge and optical emission spectroscopy monitoring system for measuring optical emission. This work demonstrates that chamber state can be monitored with SPOES and this technique can potentially help maintenance in production lines.

• Journal of Welding and Joining
• /
• 제19권2호
• /
• pp.215-220
• /
• 2001

In the T-joint welding, the complete penetration joint which is obtained by groove welding with edge preparation is generally required thor the safety and reliability of structures but this way have the some defects such as increase of working time, consumed welding electrode quantity and large welding deformation. If there is no probrem, in the strength, T-joint welding without edge preparation will be profitably understood in the economical and welding deformation side. In this paper, we performed the finite element analysis to understand the characteristics of welding residual stresses on two models, complete penetration joint have the edge preparation and incomplete penetration joint without edge preparation, respectively. Especially, we observed the relation between welding residual stress distributed on the notch of gap in the root and external force in the incomplete penetration joint without edge preparation.

• 한국항공운항학회지
• /
• 제20권1호
• /
• pp.103-111
• /
• 2012

This study reviews several fracture models for predicting the residual strength of notched composite laminates. Representative experimental results on the residual strength of composite laminates containing a notch subjected to static uniaxial tensile loading have been collected from open literature. And notched strength data for T300/5208 are analyzed. The various parameters associated with the fracture models have been determined for laminates. Notched strength data sets are compared with fracture models and the applicability of the different fracture models in predicting the notched strength of composite laminates is discussed. And static tests have been performed on 2.0mm depth notched specimen. And the test results are compared with analysis models.

• 한국자동차공학회논문집
• /
• 제5권6호
• /
• pp.148-154
• /
• 1997

The safety problems of buses have been arisen due to the increasing of road traffic. Occupant injuries are always possible in the rollover accident and the frontal impact. Thus the structure of bus should have sufficient strength to protect passengers under accidental loads. ECE(Economic Commission for Europe) regulation No.66 prescribes that the superstructure of the vehicle shall be sufficient strength for passengers' surviving and the residual space shall be preserved in the passenger compartment during and after the standard rollover accident situation. Rollover test and simulation on a large-sized bus was completed according to the regulation. The coordinates of the points on the bus were measured by photogrammetry system. The rollover situation was revived by structural crashes simulation software, PAM-CRASH, and it was checked that the structure still complied with the requirements of residual space during rollover situation. The residual space was preserved during rollover, so it was proved that the structure of the investigated bus had much probability of survival in rollover accidents.

• 소성∙가공
• /
• 제11권7호
• /
• pp.581-588
• /
• 2002

Among the processes to produce micro lens, the process using press molding is a new technology to simplify the process, but it contains many unknown variables. The press-molding process proposed in this paper was simplified into two step process, the first step is the pressing to design the preform for glass element, the second step is the annealing to reduce the residual stress. It is important to estimate the amount of shrinkage of glass gob and the residual stress during process. It Is difficult to evaluate the process variables as mentioned above through the experiment. The influences due to process variables was evaluated by using FEM parametric analysis. The results in this paper can be applicable to produce micro lens.

• 동력기계공학회지
• /
• 제18권4호
• /
• pp.85-90
• /
• 2014

In this paper, the transient thermal and residual stress analysis of the welding of 9% Ni steel plates using the FEA software ABAQUS are presented. The 9% Ni steel plates are welded manually with welding consumables of 70% Ni based Inconel type super-alloys (YAWATA WELD B (M)), producing a multi-pass/multi-layer butt weld. For these materials, temperature dependant mechanical and thermal material properties are used in the analysis. The back gouging is considered in welding process simulation. The FE thermal results are validated by comparing the real fusion profile and heat affected zone (HAZ). In addition, the continuous indentation test was conducted to measure the strength of base metal, HAZ and weld metal.

• 한국동물위생학회지
• /
• 제20권2호
• /
• pp.161-168
• /
• 1997

This study was undertaken to determined the sulfamethazine residues In urine, serum and muscle of slaughtered pigs(n: 230) by the method of TLC, EEC-4-plate and HPLC. 1. Inhibition diameter characteristics of reference bacterial substance by EEC-4-plate method and antibacterial inhibition zone was appeared sulfonamides in BS pH 7.2 2. Residual sulfamethazine was detceted from 7 serum(3.04%) and 10 urine(4.35%) by TLC test and concentration of residues was higher In urine than serum. 3. Residual sulfamethazine was detected from 9 muscle(3.91%) by EEC-4-plate method. 4. Positive samples by TLC test and EEC-4-plate method were exceed 0.1ppm quantitative analysis from 7 muscle(3.04%).

• Journal of Welding and Joining
• /
• 제11권3호
• /
• pp.34-47
• /
• 1993

용접에서 발생하는 열응력 및 잔류응력을 해석하기 위한 유한요소용 모델을 개발하였다. 여러 가 지 변수의 연구를 통하여 Ramp heat input function과 Lumped모델을 제시하였다. 용접부에 열입 력을 점차적으로 주기 위하여 Ramp heat input을 이용하였으며 Ramp input을 통하여 이차원 모 델에서의 이동열원의 영향을 고려하였고 실험치와 비교에서 최적 ramp시간을 결정하였다. 다층용 접에서는 용접 pass 에 비례하여 계산시간이 증가한다. 따라서 후판용접의 잔류응력계산에는 막 대한 계산시간이 필요하며 이를 줄이기 위하여 Lumped 모델을 개발하였다. 이 Lumped모델에서 는 각 용접층에 들어있는 용접 pass들을 하나의 lumped pass으로 이용하였으며 각 pass를 따로 계산한 모델 및 시험치와의 비교를 통하여 최적 lumped technique을 제시하였다. *****Finite element models were developed for thermal and residual stress analysis for the specific welding problems. They were used to evaluate the effectiveness of the various welding heat input models, such as ramp heat input function and lumped pass models. Through the parametric studies, thermal-mechanical modeling sensitivity to the ramp function and lumping techniques was determined by comparing the predicted results with experimental data. The kinetics for residual stress formation during welding can be developed by iteration of various proposed mechanisms in the parametric study. A ramp heat input function was developed to gradually apply the heat flux with variable amplitude to the model. This model was used to avoid numerical convergence problems due to an instantaneous increase in temperature near the fusion zone. Additionally, it enables the model to include the effect of a moving arc in a two-dimensional plane. The ramp function takes into account the variation in the out of plane energy flow in a 2-D model as the arc approaches, travels across, and departs from each plane under investigation. A lumped pass model was developed to reduce the computation cost in the analysis of multipass welds. Several weld passes were assumed as one lumped pass in this model. Recommendations were provided about ramp lumping techniques and the optimum number of weld passes that can be combined into a single thermal input.

• 한국해안·해양공학회논문집
• /
• 제22권6호
• /
• pp.353-360
• /
• 2010

경기만은 한강과 임진강 수계의 하구역을 중심으로 황해의 중부해역을 잇는 매우 중요한 해역이다. 특히 경기만 해역의 연안개발로 인한 하구습지와 연안습지의 훼손이 가속화되고 있다. 이러한 갯벌과 해저 퇴적체의 변화에 대한 이해와 원인 규명을 위해서는 조석 잔차류의 역할이 중요함을 제시하였다(Kim et al., 2009). 하지만 경기만에서의 조석 잔차류에 대한 정량적 연구는 잘 이루어져 있지 못하며, 연간 변동성에 대한 연구도 흔하지 않다. 본 연구에서는 경기만 주수로인 석모수로와 장봉수로에서 1년간 연속 관측한 수층별 조류를 이용하여, 조석 잔차류의 특성과 조류분조의 특성을 정밀하게 분석하였다. Kim et al.(2009)이 제안한 이동평균(Moving average) 기법을 이용하여 연간 월별 그리고 수층별 자료로 확대하여 분석하였다. 또한 조류조화분해를 실시하여 이동평균 기법의 잔차류 특성과 비교하였으며 계절별 수층별 조류분조의 특성을 제시하였다. 비조석성분인 잔차류 산정에는 이동평균 기법과 조류조화분해법이 동일한 결과를 보였으나 단주기 변동성 분석에는 이동평균기법이 장점을 가진 것으로 보인다. 석모수로의 잔차류는 연간 낙조류 방향이며, 표층에서 20-40 cm/s, 저층에서 10 cm/s 미만으로 분석되었다. 장봉수로에서는 연간 창조류 방향의 잔차류는 표층에서 15-30 cm/s, 저층에서 20 cm/s 안팎으로써 여름철에는 강한 경압형 구조를 보인다. 본 연구에서는 해저면에 설치된 음파식 유속계 자료의 처리, 조석잔차류의 산정과 경기만 수로에서의 연간 잔차류 수직 구조와 변동성에 대한 결과를 제시함으로써, 경기 일대의 물질이동과 퇴적체 변동성 연구에 기본적 자료로 활용될 것으로 판단된다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.459-470
• /
• 2014

During ship design, welding-induced distortions are roughly estimated as a function of the size of the component as well as the welding process and residual stresses are assumed to be locally in the range of the yield stress. Existing welding simulation methods are very complex and time-consuming and therefore not applicable to large structures like ships. Simplified methods for the estimation of welding effects were and still are subject of several research projects, but mostly concerning smaller structures. The main goal of this paper is the application of a multi-layer welding simulation to the block joint of a ship structure. When welding block joints, high constraints occur due to the ship structure which are assumed to result in accordingly high residual stresses. Constraints measured during construction were realized in a test plant for small-scale welding specimens in order to investigate their and other effects on the residual stresses. Associated welding simulations were successfully performed with fine-mesh finite element models. Further analyses showed that a courser mesh was also able to reproduce the welding-induced reaction forces and hence the residual stresses after some calibration. Based on the coarse modeling it was possible to perform the welding simulation at a block joint in order to investigate the influence of the resulting residual stresses on the behavior of the real structure, showing quite interesting stress distributions. Finally it is discussed whether smaller and idealized models of definite areas of the block joint can be used to achieve the same results offering possibilities to consider residual stresses in the design process.