• Computers and Concrete
• /
• 제19권3호
• /
• pp.283-291
• /
• 2017

A large number of residential buildings in regions subjected to severe earthquakes do not have enough load carrying capacity. The most of them have been constructed without receiving any structural engineering attention. It is practically almost impossible to perform detailed experimental evaluation and analytical analysis for each building to determine their seismic vulnerability, because of time and cost constraints. This fact points to a need for a simple evaluation method that focuses on selection of buildings which do not have the life safety performance level by adopting the main requirements given in the seismic codes. This paper deals with seismic assessment of existing reinforced concrete residential buildings and contains an alternative simplified procedure for seismic evaluation of buildings. Accuracy of the proposed procedure is examined by taking into account existing 250 buildings. When the results of the proposed procedure are compared with those of the detailed analyses, it can be seen that the results are quite compatible. It is seen that the accuracy of the proposed procedure is about 80% according to the detailed analysis results of existing buildings. This accuracy percentage indicates that the proposed procedure in this paper can be easily applied to existing buildings to predict their seismic performance level as a first approach before implementing the detailed and complex analyses.

• 한국조경학회지
• /
• 제33권6호
• /
• pp.90-97
• /
• 2006

The effects of a green buffer zone to protect a residential area from air pollution from industrial facilities and traffic was examined by analyzing the case of a green buffer zone in the Shiwha industrial complex. The green buffer zone is 175 m wide. The intent was to assess the dispersion patterns of atmospheric air pollutants and the reduction in concentration around the green buffer zone. To measure atmospheric sulfur dioxide$(SO_2)$ and nitrogen dioxide$(NO_2)$ concentration, badge-type passive samplers were used and set up at 76 locations in order to measure the concentration of air pollutants with respect to the spatial dispersion. The weighted mean values of $SO_2\;and\;NO_2$ concentration were $3\~57 ppb\;and\;18\~62 ppb$ and the differences among the green buffer zone, the industrial area and the residential areas were $0.7\~1.1 ppb$. Mean values of atmospheric concentrations of $NO_2$ were similar in industrial and, residential areas and the green buffer zone. Results of the study show that the effect of the green buffer zone on reducing the dispersion of air pollutants was very low. This study also recommends that micro-climate, i.e., wind direction should be considered as a factor for planning and design of green buffer zones.

• 한국환경과학회지
• /
• 제14권7호
• /
• pp.629-637
• /
• 2005

Polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) were investigated in soil and pine needle samples taken from 16 sites of industrial and residential areas in Changwon, Korea to assess their distribution levels and to suggest the influence of industrial activities, PCDDs/DFs levels in the soil samples ranged from 0.57 to 20.79 pg I-TEQ/g dry weight with a mean value of 4.20 pg I-TEQ/g dry weight. PCDDs/DFs levels in the pine needle samples ranged from 0.39 to 8.75 pg I-TEQ/g dry weight with a mean value of 4.09 pg I-TEQ/g dry weight. In both soil and pine needle samples, the PCDDs/DFs concentrations in the industrial area sites were higher than those in the residential area sites. Homologue profiles in pine needle samples showed different patterns compared with soil samples. Based on the results of principal component analysis (PCA), it was confirmed that pine needles reflected a direct influence from local potential sources of PCDDs/DFs, showing a much higher degree of reflection than in soils. Pine needles are very useful as an indicator for monitoring or estimating the contamination of PCDDs/DFs in other areas which have been impacted by point pollution sources.

• 산업경영시스템학회지
• /
• 제17권30호
• /
• pp.11-24
• /
• 1994

The problem of location for industries and residential quarters has undoubtedly been one of the most important factors to enhance human activities and standard of living. Nonetheless. there seem to be no such theories or approaches as to cope with this problem satisfactorily. As a matter of fact the evaluation of proposed locations so far has stuck to quantitative factors and thus the results are often rejected by the public or individuals. In deciding the location of industrial complex and/or residential quarters, the qualitative factors often play more important role than the quantitative factors. Moreover, it is quite possible for a proposed location to be disapproved for reasons other than quantifiable factors. This work presents an approach to multi-stage decision process of optimum location, particularly for residential quarters. The proposed approach consists of four stages. At the first stage, candidates for the location are searched and checked against musts. After this screening process, the candidates fulfilling the musts are evaluated both quantitatively and qualitatively at the second stage. The third stage is devoted to the integrated evaluation using diffrent weights for the two factors. At the final stage, a location is selected among the candidates evaluated at the earlier stages. This approach has been applied to and tested on a apartment-building project in Ulsan area. Difficulties arising from quantifying factors were encountered as expected. Sometimes decisions could be a matter of taste of the individuals concerned.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.734-735
• /
• 2015

Currently, effective energy management of buildings is necessary because of accelerated global climate change and resource crisis. Especially, in the case of South Korea, city gas consumption occupies 11.8% of the total energy and 39.6% is residential use among them. Therefore, for reducing the city gas consumption, the effectiveness of residential use is needed. To address this issue, the objective of this study is to analyze the difference of the city gas consumption according to the space arrangement in the apartment building. To achieve this objective, an apartment complex having over 1,000 households was selected then, according to the space arrangement such as south-east and south-west, the data of 59.97m2 and 84.96m2 were analyzed by using statistics method. As a result, in 59.97m2 and 84.96m2, the total city gas amount in 2012 showed that 9.2% and 8.4% were more increased at south-west than southeast respectively. In the future, the findings of this study can be used to develop the prediction model of city gas consumption in apartment building.

• 국제학술발표논문집
• /
• The 7th International Conference on Construction Engineering and Project Management Summit Forum on Sustainable Construction and Management
• /
• pp.337-345
• /
• 2017

The sponge city construction is being carried out in China, and how to reasonably determine the scale of the sponge city facilities is a key point that the planners and designers should seriously solve. In this paper, taking determination of the sponge city facilities in a residential building in Shenzhen as an example, the layout and scales of the rainwater tanks, raingardens, ecological roofs and permeable pavements are decided by using the volumetric method and stormwater management model (SWMM). The calculated results by the two methods are compared and analyzed. The results show that the scales of the sponge city facilities determined by the two methods are almost the same, and it means that any method can be used to determine the scale of sponge city facilities. The volumetric method is relatively simple, and it is suggested to use to determine the scale of sponge city facilities during planning stage. While SWMM is more complex and requires a lot of input conditions, but it can provide the reduction effects of the sponge city facilities for rainfalls with different recurrence periods. Therefore, SWMM is recommended to use the calculation of the hydrological process of the sponge city facilities during the design stage.

• 디자인학연구
• /
• 제21권
• /
• pp.207-217
• /
• 1997

Mixed Use Area (Multifaceted Integration) is getting increasingly demanded since it has several merits such as preventing CBD from being emptied during night time, making daily life comfortable and utilizing the land more efficiently. However, the characteristic of Mixed Use Area -as advantages of it-, which is that it combines residence, retail, office, cultural, entertainment facilities altogether could be regarded as a weakness when it is viewed from each functions' original purposes such as residential and retail areas'. Accordingly, it is needed to do basic research and develop design guidelines of the Mixed Use Area to prepare its another take-off. The purpose of this research is to study theoretical background of Mixed Use Area's birth, understand its status quo by examining examples overseas and presented possible standardized ways of developing it.

• KIEAE Journal
• /
• 제13권6호
• /
• pp.23-28
• /
• 2013

Green Standard for Energy and Environmental Design(G-SEED) has been used for environmental friendly building certification since 2002. The certification criteria initialed with multi-residential building and now it expands to 10 criteria for new and existing building types. The purpose of this study is to understand current recognition of G-SEED from the survey of multi-complex residences in newtown. From the general question, 75.2% of responders answered the period of living term between 1~3 years, 58.6% lived in $102.48{\sim}132.23m^2$ residential area and 65.2% owned their residences. The 43.2% of respondents recognized that their residences gained G-SEED certification by G-SEED emblem(31.6%). This is the significant meaning to understand public recognition of G-SEED and how to approach the strategy for raising the G-SEED recognition. The responders expected positive influence for economical value from G-SEED and also 75.3% of responders agreed with that G-SEED would be a decision make to buy and rent their residences. Second, residents responded that the consideration issue for green building is energy & prevention of environmental pollution(27.7%) which carries equal concern in G-SEED criteria category. The result of this survey verifies that the current level recognition of G-SEED of the responder's perspectives still is not well-known but it confirmed they have a positive expectation. Therefore, from this result, G-SEED needs to draw road map with detail plans for developing G-SEED with public participation.

• 한국조경학회지
• /
• 제27권2호
• /
• pp.9-18
• /
• 1999

In this study the relative effects among trees, cars, wires and building facades on visual preference are measured with the photo-montage scenes, which were synthesized by computer graphic programs. In addition to these experiments, the interaction of each elements of streetscapes have been investigated. The results of this study can be summarized as follows ; (1) It was found that trees had a remarkable positive effect on preference for streetscapes, wires had a moderate negative effect, cars had a trivial effect and the effects of building facades were medium. (2) It was investigated that the building of residential type was most preferred among commercial, residential, and office building types. The next preferred building facade was the commercial type. (3) The interaction of each element of streetscapes also have effects on preference. Especially, it was found that the combined effects of building-wire and building-cars were more notable than other combined effects of two elements.

• 한국주거학회논문집
• /
• 제20권2호
• /
• pp.27-35
• /
• 2009

With the change of construction environment, the main body of construction industry was moved from project suppliers to consumers. Accordingly in order to strengthen competitiveness, project suppliers have to concentrate on marketing for diversification. Thus, it is required to utilize real estate marketing from the beginning of development project to introduce 'consumer-centered marketing strategies' instead of 'supplier-centered marketing'. This study aims to find out what consumers consider the most important factors when selecting apartment. According to the study, when residents select their apartment in residential area, they valued those attributes with investment, location, dwelling attribute, apartment complex attribute, unit price per square meter, in order. This result will contribute to qualitative improvement of housing development project.