• Particle and aerosol research
• /
• v.5 no.4
• /
• pp.189-197
• /
• 2009

Wet-type particulate removal system is employed in most of ironmaking processes. These de-dusting systems require additional downstream aggregates for treatment of water and for drying of the collected slurry. Thus dried slurry can be pressed in shape of briquettes and recycled in the steelmaking process. Different from the wet-type, the dry-type particulate removal systems generate no slurry. A high-temperature, high-pressure de-dusting system with inertial inlet was developed. The target application of this system was to remove particulate matter generated from the novel ironmaking process and other steelmaking processes. In this study we conducted tests with this newly developed system to evaluate the performance of the silica-carbide (SiC) ceramic filters. In addition, for purpose of comparison, we also conducted tests with a unit which has conventional direct inlet. Fe-Particles collected from the novel ironmaking process were used in our tests as test dusts. The temperature and the pressure were kept constant at their respective values $800^{\circ}C$ and $3kg_f/cm^2$.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.227-236
• /
• 2015

This study analyzed the lower body type of 30's Korean men to develop a slim-fit pants pattern. As the analysis data, direct measurement data of anthropometric measured value in the 6th Size Korea(KATS, 2010) was used as basic data with 481 men in 30's as analysis objects. The result are as follows. First, the result of analyzing factors for the lower body type classification indicated five factors. Second, the result of executing group analysis (with the independent variable of 5 clusters extracted from the factor analysis)classified the following three types. Type 1(36.8%) displayed a medium height of lower body type, small waist and hip, slim and fit body type with a slim shape between the knee and ankle. The shape between the waist and hip had characteristics of a slight curve and short length. Type 2(35.6%) displayed lowest height of a lower body type that was large and thick between the waist and the hip. The drop value of the waist and the hip was small; therefore, the body type was flat with a minimal curve. The underpart type (below the knee) was the thickest and the length was short. Type 3(27.7%) displayed the highest lower body type, a medium level waist size, flat and narrow waist and belly. This body type had a curve with big drop value of the waist and the hip, lower part from the hip to the ankle (including the knee) and a thick calf with along leg.

• Journal of Korean Society on Water Environment
• /
• v.24 no.3
• /
• pp.333-339
• /
• 2008

This study was carried out to assay the relationships between empirical factors and water quality in 23 agricultural reservoirs. Based on the trophic state index (TSI) deviation analysis, phosphorus in type II and III was the primary limiting factor on algal growth. BOD, COD, TP and chl.a concentration in type III reservoirs showed higher concentration than those of other types, while SS and TN concentration was no noticeable difference among three types. Characteristics of type III reservoirs showed large reservoir surface and drainage area, large surface area to volume (SAV) ratio, small drainage area to reservoir area (DA/RA) ratio, relatively old age, large paddy field and upland field to drainage area ratio (Mean 17.4%) and high generation and discharge loads compared to other types of reservoirs. In type I and II reservoirs, trends of BOD, TN, TP concentration in water column, were similar to those of the discharge load of pollutants. Although type II reservoirs generally showed low phosphorus discharge loads compared to type I reservoirs, TP and chl.a concentration in water column was greater than that of type I. Characteristics of type II reservoirs showed relatively large SAV ratio and old age compared to type I reservoirs and was similar to those of type III including eutrophic reservoirs.

• The Journal of Advanced Prosthodontics
• /
• v.10 no.2
• /
• pp.155-162
• /
• 2018

PURPOSE. The aim of this study was to compare the fracture of implant component behavior of external and internal type of implants to suggest directions for successful implant treatment. MATERIALS AND METHODS. Data were collected from the clinical records of all patients who received WARANTEC implants at Seoul National University Dental Hospital from February 2002 to January 2014 for 12 years. Total number of implants was 1,289 and an average of 3.2 implants was installed per patient. Information about abutment connection type, implant locations, platform sizes was collected with presence of implant component fractures and their managements. SPSS statistics software (version 24.0, IBM) was used for the statistical analysis. RESULTS. Overall fracture was significantly more frequent in internal type. The most frequently fractured component was abutment in internal type implants, and screw fracture occurred most frequently in external type. Analyzing by fractured components, screw fracture was the most frequent in the maxillary anterior region and the most abutment fracture occurred in the maxillary posterior region and screw fractures occurred more frequently in NP (narrow platform) and abutment fractures occurred more frequently in RP (regular platform). CONCLUSION. In external type, screw fracture occurred most frequently, especially in the maxillary anterior region, and in internal type, abutment fracture occurred frequently in the posterior region. placement of an external type implant rather than an internal type is recommended for the posterior region where abutment fractures frequently occur.

• Fashion & Textile Research Journal
• /
• v.6 no.3
• /
• pp.266-274
• /
• 2004

This study is on the sensitive image of pattern expressed in the color & formative types of traditional Jokakbo(scraps of cloth). The object of this research is Korean traditional scraps of cloth in the latter period of Chosun Dynasty. This study is to be classified into 10 formative types like square type 1, square type 2, diagonal type, diamond type, many color striped type, concentric circle type, pinwheel type, vertical line type, cintamani pattern type, and free style type to apply the design of Jokakbo to Korean design. And color group is divided into vivid tone and pale tone. And it constitutes 17 patterns from the combination of these two types. As for the factors of constitution of scraps of cloth, it consists of factors like revelation, attraction, temperature sense, abstract, and rigidity. In the emotional image in the patterns, both vivid tone and pale tone showed dynamic and warm emotion together. Also, the factors of revelation and attraction were evaluated as opposite images, and it evaluated the plain and dim emotion as more attractive emotion. They preferred the pale tone to the vivid tone. They preferred the cintamani pattern in the vivid tone, and the diamond pattern in the pale tone most. From the research result above, this study made the abstract image of scraps of cloth standardized and prepared for a basis to execute it essentially. This research will be used as basic data to make traditional Korean image spotlighted in the world fashion markets as well as it will be helpful to the development of pattern design for the scraps of cloth essentially.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.2
• /
• pp.101-109
• /
• 2005

The purpose of this study is to investigate the performance of outdoor heat exchanger for heat pump using carbon dioxide. Two types of fin and tube heat exchangers (2 rows for type A and 3 rows for B) are tested. Both heat exchangers have counter-cross flow and 1-circuit arrangement. Test results such as heat transfer rate, pressure drop characteristics and temperature distribution in the heat exchanger are shown with respect to mass flow rate of refrigerant and frontal air velocity For cooling mode, the minimum temperature difference between air and refrigerant of type B is smaller than that of type A by $1^{circ}C$, but the pressure loss of air side is much higher for type B by $29\%$. It is found that a large temperature gradient of carbon dioxide during gas cooling Process Promotes thermal conduction through tube wall and fins which results in degradation of heat transfer performance. For heating mode operation, type B heat exchanger shows higher heat transfer performance compared to type A. However, because pressure loss of refrigerant side of type B is much greater than that of type A, the refrigerant outlet pressure of type B becomes lower than that of type A.

• 한국노년학
• /
• v.32 no.2
• /
• pp.501-512
• /
• 2012

This is the second research to explore the actual condition of the old women prostitutes serving the old men (so-called 'Bacchus Azumma') in qualitative method. For this, 14 old women prostitutes, aged 38~73, were interviewed as research participants: 9 are korean and 4 are korean-chinese and 1 is chinese. The data obtained through the depth interviews were analyzed using a qualitative analytic method. As a result, three types according to the purpose of approach (heavy petting-intent type, intercourse-intent type, and criminal-intent type) and two types according to occupation or not (full-time type and part-time type) are found. The social concerns and measures on Bacchus Azumma are needed.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.26 no.1
• /
• pp.30-39
• /
• 2024

Korean arboretums where a large number of people are visiting could not do visitor's satisfaction in qualitative side and communication through education and event, although a lot of those things statistically have been doing so far. At this side, it needs an arboretum's segmentation: preparing to an adaptation strategy of a new paradigm, differentiated strategy, and problem solving strategy tied by a similar group for the Korean arboretum visitors. This research tries to classify several patterns with Korean arboretums by visitor's behavior and propose each type of subspecialized management plan after analyzing characteristic of supply and demand. The research for this tries to classify several patterns of Korean arboretum and suggest segmentalzed management plan by types after analyzing characteristics of aspects of demand and supply. By looking at the main patterning result of arboretum as a standard of the demand, there were four sorts of arboretums. In the first, it is the arboretum of intermediate type: not a clear characteristic. In the second, it is an arboretum of multipurpose resort type: strongly demanding motivational factors of a rest, health, access, low cost, experience, learning and sightseeing. In the third, it is an arboretum of theme tour type: a strong sightseeing motivational factor and demanding appreciate scenery. In the last, it is an arboretum of studying and admiring type: demanding a motivational factor of sightseeing landscape and plants, a strong experience and learning.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.5
• /
• pp.130-138
• /
• 2003

This study aims to review the research trends concerning landscape plants and to foresee the next trends in Korea. The research scope was limited to the articles listed in the Journal of Korean Institute of landscape Architecture. The number of articles related to landscape plants was calculated for five-year-period over 30 years and for groups of ten issues from 1973 until 2003. Of all the related articles, subjects or materials, method types, and contents were categorized and analyzed for groups of ten issues from 1973 until 2003. The results, of the research were as follows. Of 1,018 articles in total, there were 930 paper-type, 52 discourse-type, and 36 remains. Of 212 related articles, there were 205 paper-type, 3 discourse-type, and 4 remains. Of 232 subject articles, there were 115 woody-related, 47 herbaceous-related, and 33 soil-related articles. Of 221 method articles, there were 89 experiment, 54 field research 33 planting articles. Of 243 content articles, there were 47 investigation, 36 construction, 34 environmental effect, and 33 maintenance articles.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.5
• /
• pp.672-679
• /
• 2010

Diabetes mellitus is a worldwide epidemic with high mortality. As concern over this disease rises, the number and value of research grants awarded by the National Research Foundation of Korea (NRF) have increased. Diabetes mellitus is classified into two groups. Type 1 diabetes requires insulin treatment, whereas type 2 diabetes, which is characterized by insulin resistance, can be treated using a variety of therapeutic approaches. Hyperglycemia is thought to be a primary factor in the onset of diabetes, although hyperlipidemia also plays a role. The major organs active in the regulation of blood glucose are the pancreas, liver, skeletal muscle, adipose tissue, intestine, and kidney. Diabetic complications are generally classified as macrovascular (e.g., stroke and heart disease) or microvascular (i.e., diabetic neuropathy, nephropathy, and retinopathy). Several animal models of diabetes have been used to develop oral therapeutic agents, including sulfonylureas, biguanides, thiazolidinediones, acarbose, and miglitol, for both type 1 and type 2 diseases. This review provides an overview of diabetes mellitus, describes oral therapeutic agents for diabetes and their targets, and discusses new developments in diabetic drug research.