• ETRI Journal
• /
• 제38권4호
• /
• pp.654-664
• /
• 2016

This paper presents a transformer-based reconfigurable synchronous boost converter. The lowest maximum power point tracking (MPPT)-input voltage and peak efficiency of the proposed boost converter, 20 mV and 88%, respectively, were achieved using a reconfigurable synchronous structure, static power loss minimization design, and efficiency boost mode change (EBMC) method. The proposed reconfigurable synchronous structure for high efficiency enables both a transformer-based self-startup mode (TSM) and an inductor-based MPPT mode (IMM) with a power PMOS switch instead of a diode. In addition, a static power loss minimization design, which was developed to reduce the leakage current of the native switch and quiescent current of the control blocks, enables a low input operation voltage. Furthermore, the proposed EBMC method is able to change the TSM into IMM with no additional time or energy loss. A prototype chip was implemented using a $0.18-{\mu}m$ CMOS process, and operates within an input voltage range of 9 mV to 1 V, and an output voltage range of 1 V to 3.3 V, and provides a maximum output power of 37 mW.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.771-783
• /
• 2017

Using a transparent fracture replica with aperture size and water-cement ratio (w/c), the factors affecting the penetration behavior of rock grouting were investigated through laboratory experiments. In addition, the waterproof efficiency was estimated by the reduction of water outflow through the fractures after the grout curing process. Penetration behavior shows that grout penetration patterns present similarly radial forms in all experimental cases; however, velocity of grout penetration showed clear differences according to the aperture sizes and water-cement ratio. It can be seen that the waterproof efficiency increased as the aperture size and w/c decreased. During grout injection or curing processes, air bubbles formed and bleeding occurred, both of which affected the waterproof ability of the grouting. These two phenomena can significantly prevent the successful performance of rock grouting in field-scale underground spaces, especially at deep depth conditions. Our research can provide a foundation for improving and optimizing the innovative techniques of rock grouting.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.111-115
• /
• 2011

Surface Texturing is an essential process for high efficiency in multi-crystalline silicon solar cell. In order to reduce the reflectivity, there are two major methods; proper surface texturing and anti-reflection coating. For texturization, wet chemical etching is a typical method for multi-crystalline silicon. The chemical solution for wet etching consists of HF, $NHO_3$, DI and $CH_3COOH$. We carried out texturization by the change of etching time like 15sec, 30sec, 45sec, 60sec and measured the reflectivity of textured wafers. As making the silicon solar cells, we obtained the conversion efficiency and relationship between texturing condition and solar cell characteristics. The reflectivity from 300nm to 1200nm was the lowest with 15 sec texturing time and 60 sec texturing time showed almost same reflectivity as bare one. The 45 sec texturing time showed the highest conversion efficiency.

• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.569-575
• /
• 2014

A highly efficient class E power amplifier is demonstrated for application to wireless power transfer system. The amplifier is designed with an L-type matching at the output for harmonic rejection and output matching. The power loss and the effect of each component in the amplifier with the matching circuit are analyzed with the current ratio transmitted to the output load. Inductors with a quality factor of more than 120 are used in a dc feed and the matching circuit to improve transmission efficiency. The single-ended amplifier with 20 V supply voltage shows 7.7 W output power and 90.8% power added efficiency at 6.78 MHz. The wireless power transfer (WPT) system with the amplifier shows 5.4 W transmitted power and 82.3% overall efficiency. The analysis and measurements show that high-Q inductors are required for the amplifier design to realize highly efficient WPT system.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.29-39
• /
• 2019

In this study, we introduce a model that satisfies energy efficiency and economical efficiency by introducing and demonstrating cogeneration generators in industrial complexes using various actual data collected at the site. The proposed model is composed of three scenarios, ie, full - time operation, scenario operated according to demand, and a fusion type. In this study, the power generation profit and surplus thermal energy are measured according to the operation of the generator, and the thermal energy is traded according to the demand of the customer to calculate the profit and loss including the heat and evaluate the economic efficiency. As a result of the study, it is relatively profitable to reduce the generation of the generator under the condition that the electricity rate is low and the gas rate is high, while the basic charge is not increased. On the contrary, if the electricity rate is high and the gas rate is low, The more you start up, the more profit you can see. These results show that even a cogeneration power plant with a low economic efficiency due to a low "spark spread" has sufficient economic value if it can sell more than a certain amount of heat energy from a nearby customer and adjust the applied power through peak management.

• 한국입자에어로졸학회지
• /
• 제15권2호
• /
• pp.57-65
• /
• 2019

Recently, there has been much research on the effect of fine dust on human body with increasing interest in the fine dust. Thermal power plant, which is considered as one of the main sources of fine dust, is reported to be responsible for 14% of the total amount of domestic fine dust in the Republic of Korea. Therefore, dust collecting devices in the thermal power plant need to be improved. In this study, the electrostatic precipitator (ESP) was considered to substitute for a mist eliminator used in flue gas desulfurization facility. By considering real situation in the flue gas desulfurization facility, the collection efficiency of the ESP was evaluated by using the sprayed limestone slurry particles. The collection efficiency of the ESP was higher than that of the mist eliminator, showing the possibility of replacing the mist eliminator with the ESP in flue gas desulfurization facility.

• 품질경영학회지
• /
• 제43권4호
• /
• pp.533-544
• /
• 2015

Purpose: The purpose of this study is to analyze the cost efficiency of food industry in JeollaNamdo. And this study is focused on the correlation between the economic efficiency of food industry and its cost efficiency, based on the analysis of 372 food companies' data in JeollaNamdo in 2012. Methods: DEA cost minimization is the measurement of the cost efficiency of JeollaNamdo food industry in 2012. In this study, the CCR and BBC models have been employed to analyze the decomposing cost efficiency-technical efficiency, allocative efficiency, and scale efficiency respectively. And the Spearman rank correlation and Wilcoxon signed rank test also have been employed to check the correlation and difference between the ranking orders based on the efficiency scores respectively. Results: For the CCR model, mean cost efficiency was found to be 0.084(0.54 for allocative efficiency and 0.19 for technical efficiency). For the BCC model, mean cost efficiency was found to be 0.252(0.453 for allocative efficiency and 0.564 for technical efficiency). Average scale efficiency was found to be 0.38. In analyzing the results, this study argues that the optimal way to improve cost efficiency is by reducing inputs proportionally and changing their combination. Conclusion: The efficiency scores of the two models show high correlation, whereas, the differences between them are also found to be significant. Hence, it should be cautious to select a suitable model when we do the research.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.707-716
• /
• 2018

Purpose: This study aims to analyze the management performance and production efficiency of strawberry farmers who introduced smart farming, one of the primary symbols of the fourth industrial revolution in the agricultural sector. Methods: We conducted an empirical survey of strawberry farms using smart farming and analyzed production efficiency using DEA method. Results: First, difficulties for strawberry farmers introducing smart farming included time and money spent on parts replacement and additional costs due to compatibility problems with existing facilities after the adoption. Second, strawberry farmers using smart farming increased their total income by producing higher yield and improving quality thanks to the competent growth management. Third, the analysis of production efficiencies before and after smart farming found improvement in technical efficiency, pure technical efficiency, and scale efficiency. But, the gaps in technical and scale efficiencies among the farms widened. Conclusion: Based on the results above, following policy suggestions are offered. First, an environment control technology suitable for strawberry farming needs to be developed. Second, the smart farming technology needs to be standardized by the government. Third, new smart farm models need to be developed to accommodate to the facilities and environment in Korea through collecting big data including high-quality data on the environment, growth, and yield. Fourth, continuing education needs to be provided to narrow the gap in smart farming technology among strawberry farmers.

• 한국토양비료학회지
• /
• 제49권1호
• /
• pp.66-74
• /
• 2016

Environmental pollution from abandoned metal mines has been awarded as serious problem and many techniques have been applied to remediate pollutants. Main objective of this research was to evaluate efficiency of heavy metal sorption capacity of spent mushroom media (SMM) in aqueous and soil matrix. Laboratory batch experiment was conducted and 4 different heavy metals (Cd, Pb, Cu, Zn) were evaluated. In aqueous phase, all 4 heavy metals showed high reduction efficiency ranged from 60-99% and Pb showed the highest sorption efficiency. In case of soil phase, much lower sorption efficiency was observed compared to aqueous phase. The highest reduction efficiency was observed in Cd (average of 38%). With scanning electron microscopy energy dispersive detector (SED-EDS) analysis, we confirmed sorption of heavy metals at the surface of SMM. Overall, SMM can be used as sorption materials for heavy metals in both aqueous and soil matrix and more research should be conducted to increase sorption efficiency of SMM in soil.

• 한국경영과학회지
• /
• 제42권2호
• /
• pp.49-61
• /
• 2017

The study on the efficiency analysis of Korean automobile parts companies is mostly based on the calculation of the size of output such as sales. However, the performance indicators such as sales, operating profit, and net profit are directly related to the cost structure, and this cost structure is affected by changes in the company's asset structure and capital structure. As a result, it is necessary that efficient capital procurement should be done at the same time to create efficient management performance through proper investment. In this study, we aim to measure the efficiency of asset and capital procurement compared to the sales figures, such as sales, generated by 33 primary suppliers who supply parts to Hyundai Kia Motors. For this purpose, this study proposed a DEA cross analysis model that can simultaneously measure efficiency in terms of input assets and capital procurement based on the same management performance when analyzing the efficiency of domestic auto parts companies.