• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.4
• /
• pp.257-263
• /
• 2015

The purpose of this study was to survey the elderly patients through Basic information, Problems Wheelchair, Wheelchair Satisfaction, Usage and Requirements. The meaning of purpose is identify the problems and difficulties of wheelchair use in geriatric patients and an alternative for the correct use of wheelchairs elderly patients. The study investigated through questionnaires. That used questionnaires to modified to Gu Hyeon-Mo questionnaire (2005) and Quebec User Evaluation of Satisfaction with assistive Technology 2.0. 120 of 150 questionnaires were collected and one of them is excluded. Analysis results suggest the following. It was often feel joint pain results from physical damage. In addition when you use a wheelchair it was often feel discomfort in lower back and pelvis. And it feels uncomfortable when moving the tilt. Wheelchair satisfaction of the participants responded to the most 'Normal'. Results of the wheelchair operation ability is as follows. In the case of manual wheelchairs was feeling the difficulty to cross the threshold, Wheel lying, Stairs usage. Also In the case of an electric wheelchair was feeling the difficulty to use Tilt and Decline, Separate from the motor, and Replacement battery. In conclusion, To reduce of back pain and hip joints of elderly patients need to modify design and appearance of the wheelchair. In a later study will find to reduce discomfort and to improve satisfaction of the elderly who use wheelchairs. It will have to periodically examine the usage and satisfaction with them.

• Nuclear Engineering and Technology
• /
• v.8 no.2
• /
• pp.101-116
• /
• 1976

An attempt is made to analyze the unit nuclear power cost of the Go-ri units 1 and 2 in terms of a set of model data. For the calculational purpose, the power cost is first decomposed into the cost components related to the plant capital, operation and maintenance, working capital requirements, and fuel cycle operation. Then, POWERCO-50 computer code is applied to enumerate the first three components and MITCOST-II is used to evaluate the fuel cycle cost component. The specific numerical results are the fuel cycle cost of Go-ri unit 2 for three alternative fuel cycles presumed, levelized unit power cost of units 1 and 2, and the sensitivity of the power cost to the fluctuation of the model data. Upon comparision of the results with the power cost of the fossil power plants in Korea, it is found that the nuclear power is economically preferred to the fossil power. Nevertheless, the turnkey contract value of Go-ri unit 2 appears to be rather expensive compared with the available data on the construction cost of the PWR plants. Therefore, it is suggested that, in order to make the nuclear power plants more attractive in Korea, the unfavorable contract of such kind must be avoided in the future introduction of the nuclear power plant. Capacity factor is of prime importance to achieving the economic generation of the nuclear electricity from the Go-ri plant. Therefore, it is concluded that more efforts should be directed to make the maximum use of the Go-ri plant.

• International Journal of Highway Engineering
• /
• v.19 no.3
• /
• pp.19-30
• /
• 2017

PURPOSES : This study proposes the road asset valuation approach using alternative depreciation methods. It has become necessary to have asset management system according to the adoption of accrual basis accounting for governmental financial reporting and the amendment of the road act. Therefore, it is very important to analyze the effect of depreciation methods on road asset value as a basic research for road asset management system. METHODS : The Ministry of Strategy and Finance (MOSF) has mainly performed road asset valuation based on Write down Replacement Cost and Straight Line depreciation method. This study suggests some appropriate asset valuation methods for road assets through case analysis using three depreciation methods: Consumption-based depreciation method, Condition-based depreciation method, and Straight Line depreciation method. A road asset valuation data of national highway route 1 (year 2014) is used to analyze the effect of three depreciation methods on the road asset value. Road assets include land and structures (pavement, bridge, and tunnel). This study mainly focuses on structures such as bridges and tunnels, because according to governmental accounting standards, land and road pavement assets do not depreciate. RESULTS : The main results of this study are as follows. Firstly, overall asset value of national highway route 1 was estimated at 6.97 trillion KRW when MOSF's method (straight-line depreciation method) is applied. Secondly, asset value was estimated at 4.85 trillion KRW on application of consumption-based depreciation method. Thirdly, asset value was estimated at 4.37 trillion KRW when condition-based depreciation method is applied. Therefore, either consumption-based or condition-based depreciation methods would be more appropriate than straight-line depreciation method if we can use the condition data of road assets including land that are available in real time. CONCLUSIONS : Since road assets such as pavements, bridges, and tunnels have various patterns of deterioration and condition monitoring period, it is necessary to consider a specific valuation method according to the condition of each road asset. Firstly, even though road pavements do not depreciate, asset valuation through condition-based depreciation method would be more appropriate when requirements for application of non-depreciation approach are not satisfied. Since bridge and tunnel facilities show various patterns of deterioration and condition monitoring period by type and condition level, consumption-based depreciation method based on deterioration model would be appropriate. Therefore, it is necessary to have a reasonable asset management system to apply condition-based depreciation method and a periodic condition investigation to manage road assets well.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.1
• /
• pp.22-54
• /
• 1989

Seasonal semi-greenhouse type solar-drying of 2.5cm-and 5.0cm-thick lumber of Quercus aliena Blume and Quercus variailis Blume was carried out to investigate the possibility of solar-drying of wood and to decide the active solar-drying period in Korea. In the active solar-drying period obtained solar-dehumidification, semi-greenhouse type solar-, air- and kiln-drying of 2.5cm -thick lumber of oaks were carried out to analyze drying-rates. -defects, and -yield in each drying-method and to calculate daily total absorbed solar-radiation the solar dryers. The energy balance equations were set up, considering all the energy requirements, to analyze the heat efficiencies of semi-greenhouse type solar and solar-dehumidification-dryer. In a seasonal drying the drying rate of semi-greenhouse type solar-dryer was highest in summer, and greater in fall, spring, and winter in order. Solar-drying time was 45% in summer to 50% in winter of the air-drying rime, and more serious drying-defects occurred in air-drying than in solar-drying. In the active solar-drying period. April, May, and June, the average drying rate in solar-dehumidification-drying was 1.0%/day and greater than 0.8%/day in semi-greenhouse type solar-drying. In solar-dehumidification-drying the time required to dry lumber to 10% moisture content was less than 60 days, and solar-dehumidification-drying showed the highest drying-yield, 65.01%, than the other drying methods. The daily total absorbed solar radiations were 8.51MJ on the roof collector and 6.22 MJ on the south wall collector. In the energy blance 69.48% of total energy input was lost by heat conduction through walls, roof. and floor 11.68% by heat leakage, 0.33% by heating the internal structures of the solar-dryer and 5.38% by air-venting. Therefore the heat efficiency of semi-greenhouse type solar-dryer 13.13%, was lower than that of solar-dehumidification-dryer, 14.04%. Solar-drying of lumber in Korea showed the possibility to reduce the air-drying-time in every season and the efficiency of solar-dehumidification drying was higher than that of semi-greenhouse type solar-drying.

• Journal of agricultural medicine and community health
• /
• v.32 no.3
• /
• pp.139-153
• /
• 2007

Injury in agriculture is a serious public health issue with a major impact on the lives of Korean farmers. It is one of the leading causes of death and is also a major cause of longand short-term disability. In 2001, the social cost of one accident in agricultural machinery was estimated as 97.7-97.8 million won that is 4 fold of farm household income in Korea. Effective prevention and control of injuries requires a system of surveillance that monitors the incidence of injuries, their causes, treatment and outcomes. This requires an integrated system of data collection, analysis and interpretation and communication. Creating effective injury surveillance system in Korea requires to establish a framework for a national agenda. Discussions regarding the development of the framework should address, but not be limited to issues related to Data Holdings and Linkages; Capacity and Skills; Communication; Interconnection; and Surveillance Products. Ideally, an injury surveillance system would meet the information requirements across all sectors, while allowing each to have the ongoing information it needs for its policy and programming needs. This study was carried out to develop a surveillance system of agricultural injuries in Korea. Study subjects were residents who lived in a typical agricultural area (Yangpyung area in Kyung-gi province). The main data sources were reports of village headmen, compared with data of 'National Emergency Management Agency', 'National Health Insurance Corporation', 'Insurance of National Agricultural Cooperative', and 'Emergency Medical Centers'. Each data were reviewed to validate the strengths and weaknesses.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.111-120
• /
• 2006

In this paper, a node architecture of WDM metro network for connecting broadband access networks to converge wire/wireless networks. In consideration of the proposed node architecture and network requirements we proposed and evaluated medium access control protocols. We review WDM related technologies of sub-carrier multiplexing and optical components in order to resolve the bottleneck between optical backbone networks md access networks, and a access node architecture sharing common wavelength is introduced. Source-stripping (SS) MAC protocol Is evaluated under the proposed functional node architecture. DS+IS (Destination-Stripping and Source-Stripping) and DS+IS (Destination-Stripping and Intermediate-Stripping) MAC protocols are described to increase the slot-reuse factor which is low on SS MAC protocol. The key function of new MAC protocols regards the optical switch module of proposed node architecture and helps intermediate or source access nodes for dropping slots to destinations of different wavelength group. Thus, slot-reuse factor increases as the MAC protocols reduce the unnecessary ring-rotation of transferred slots. We use a numerical analysis to expect bandwidth efficiency and maximum throughput by slot-reuse factor Throughput network simulation, the verification of throughput, queuing delay, and transmission fairness are compared among MAC protocols.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.2
• /
• pp.69-80
• /
• 1999

Recently, social requirements of personal identification techniques are rapidly expanding in a number of new application ares. Especially fingerprint recognition is the most important technology. Fingerprint recognition technologies are well established, proven, cost and legally accepted. Therefore, it has more spot lighted among the any other biometrics technologies. In this paper we propose a new on-line fingerprint recognition algorithm for non-inked type live scanner to fit their increasing of security level under the computing environment. Fingerprint recognition system consists of two distinct structural blocks: feature extraction and feature matching. The main topic in this paper focuses on the feature matching using the fingerprint minutiae (ridge ending and bifurcation). Minutiae matching is composed in the alignment stage and matching stage. Success of optimizing the alignment stage is the key of real-time (on-line) fingerprint recognition. Proposed alignment algorithm using clique shows the strength in the search space optimization and partially incomplete image. We make our own database to get the generality. Using the traditional statistical discriminant analysis, 0.05% false acceptance rate (FAR) at 8.83% false rejection rate (FRR) in 1.55 second average matching speed on a Pentium system have been achieved. This makes it possible to construct high performance fingerprint recognition system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.4
• /
• pp.6-14
• /
• 2011

The fast growing of the number of users requires the development of reliable communication systems able to provide higher data rates. In order to meet those requirements, techniques such as Multiple Input Multiple Out (MIMO) and Orthogonal Frequency Division multiplexing (OFDM) have been developed in the recent years. In order to combine the benefits of both techniques, the research activity is currently focused on MIMO-OFDM systems. In addition, for a fast wireless channel environment, the data rate and reliability can be optimized by setting the modulation and coding adaptively according to the channel conditions; and using sub-carrier frequency, and power allocation techniques. Depending on how accurate the feedback-based system obtain the channel state information (CSI) and feed it back to the transmitter without delay, the overall system performance would be poor or optimal. In this paper, we propose a Signal to Noise Ratio (SNR) estimation algorithm where the preamble is known for both sides of the transciever. Through simulations made over several channel environments, we prove that our proposed SNR estimation algorithm is more accurate compared with the traditional SNR estimation. Also, We applied AMC on several channel environments using the parameters of IEEE 802.11n, and compared the Throughput performance when using each of the different SNR Estimation Algorithms. The results obtained in the simulation confirm that the proposed algorithm produces the highest Throughput performance.

• The Korean Journal of Emergency Medical Services
• /
• v.13 no.2
• /
• pp.73-86
• /
• 2009

Purpose : This study is a descriptive correlation study to offer the basic materials for developing the preventive program of continuously increasing AIDS in the young people by examining the knowledge and attitude of AIDS in college students. Methods : The period of data collection was from May 1 to 15, 2009, 300 freshman, sophomore and junior students who understood the purpose of the research and agreed to participate in the questionnaire were randomly sampled, structured questionnaire was distributed to them and their responses were collected. Instruments used for this study included those used by Kim and Lee and revised and complemented by this researcher to measure the knowledge of AIDS and those by Yun and Lee revised and complemented by the researcher to measure the attitude of AIDS. For data analysis, it measured technical statistics, t-test, ANOVA, and Pearson's correlation coefficient using SPSS/PC 12.0. Results : The results of this study are summarized as follows. 1. The whole knowledge of AIDS the subjects had scored 58.9 and their average attitude scored $3.78(1{\pm}25)$. 2. In the degree of knowledge of AIDS depending on general characteristics and health-related characteristics of the subjects, it was found that the students at the department of emergency medical showed higher knowledge(t=3.638, p=.001) and positive attitude of AIDS(t=3.330, p=.001) compared to students at other majors. 3. In the degree of knowledge of AIDS depending on AIDS-related education, subjects who had experienced AIDS education(t=1.973, p=.050), those with the experience of theory education(F=4.057, p=.008), those who felt the necessity of AIDS education(t=4.588, p=.000), and those who were willing to take part in AIDS education(t=2.898, p=.004) showed higher know1edge of AIDS. In the attitude of AIDS, subjects with theory-oriented AIDS education(F=3.012, p=.032), those who felt the necessity of AIDS education(t=2.445, p=.015), and those who were willing to take part in AIDS education(t=2.379, p=.018) showed positive attitude of AIDS education. 4. As the knowledge of AIDS the subjects was higher(r=.329, p=.000), they showed more positive attitude of AIDS and it meant that there was positive correlations. Conclusion : Consequently, systematic, concrete and continuous education of AIDS suitable to the requirements of college students is needed to induce changes of their knowledge and attitude of AIDS and for this, AIDS education program which can be used properly by the developmental stages of college students who belong to late adolescence should be developed in the field of school and if possible, curriculum of sex education including AIDS education should be established in all departments of college.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.1
• /
• pp.125-129
• /
• 2016

Background: Patients with differentiated thyroid cancers (DTC) who receive radioactive iodine-131 (RAI) are released from isolation when their dose rate is below the regulatory requirements. The purpose of this study was establish predicting factors for early release from the isolation facility after RAI administration in patients with DTC. Materials and Methods: This was a prospective study which included 96 (58 females and 38 males) patients with DTC who had received RAI from April 2013 till August 2015. The study was duly approved by the ethical committee of the institute. Patients who had complete information of primary tumor size (PTS), serum TSH, stimulated thyroglobulin level [sTg] with antibodies (IU/ml) at the time of RAI treatment were included. All had a normal serum creatinine level. To attain lower effective half-life good hydration and administration of soft laxative were ensured. Dose rate was measured (immediately, 24 h and 36 h) at 1 meter distance from anterior mid trunk and a dose rate <$50{\mu}Sv/h$ was considered as the releasing criterion. At 24 h 50 patients were released while the remaining 46 patients were released at 36 h. A post-ablative whole body scan (PA-WBIS) was performed 5-8 days after RAI ablation in all patients. Results: Patients released after 24 h were significantly younger, had smaller lesions with higher proportion of papillary cancer, lower sTg, lower sTg/TSH ratio and had received a lower dose of RAI as comapred to those who were discharged after 36 h. Serum TSH and gender were not found to have any significant correlation between two cohorts. ROC and multivariate analysis have shown age ${\leq}37years$, PTS ${\leq}3.8cm$, $RAI{\leq}150mCi$, $sTg{\leq}145ng/ml$ and $sTg/TSH{\leq}1.085$ as strong indepedent predictors for early release. Conclusions: We conclude that younger age (${\leq}37years$), smaller tumor size (${\leq}3.8cm$), lower RAI dose (${\leq}150mCi$), lower sTg (${\leq}145ng/ml$) and a lower sTg/TSH ratio (${\leq}1.085$) are significant independent predictors for release at 24 h after RAI treatment in DTC patients. Effective utilization of these factors could help the treating physicians to use limited number of internment facilities with higher throughput, lower cost and lower psychological stress to patients.