• 시스템엔지니어링워크숍
• /
• s.1
• /
• pp.32-39
• /
• 2003

This work describes a study of analysis and evaluation activities applied systems engineering approach. It is presented technique of derivation and management requirement. A scheme of the defence project analysis and evaluation using a systems engineering process is described.

• Journal of Aerospace System Engineering
• /
• v.12 no.4
• /
• pp.26-34
• /
• 2018

Structural static test and the performance test were conducted to determine whether the propeller developed for a multi-copter with the take-off weight of 25 kg satisfies the design requirement. The result of the structural test revealed that the propeller had a safety margin of 3 or more as the ultimate load and requirement load did not cause the specimen breakage. In the performance test, the propeller generated the hover thrust and maximum thrust of design requirement, and hover efficiency in the operating thrust range was greater than 0.73. Maximum hover efficiency increased by more than 3% compared to the reference propeller and electric power consumption decreased by more than 4% in the operating range. The propeller was found to be successfully developed based on the satisfaction rate of the structural strength requirement and the performance requirement.

• The KSFM Journal of Fluid Machinery
• /
• v.3 no.4 s.9
• /
• pp.7-14
• /
• 2000

This paper provides integrity evaluation and root cause analysis for defects observed at volute tongue, or cutwater, of the operating centrifugal pump in power plant. The cause of the cracks are analyzed and reviewed from the viewpoint of the operation and maintenance of the pumps, and the sample obtained from the cracked volute tongue of the pump are examined. At first, in-situ hardness test and microstructure examination were performed to understand the cause of cracking at volute tongue. The evaluation of structural integrity and the possibility of the crack propagation is also evaluated. Cracks were typical intergranular cracking and propagated along with prior austenite grain boundary. At easing volute tongue, the hardness was higher than ASTM requirement and a large amount of intergranular Cr carbide was precipitated. These were due to high C content in material. P content was also higher than ASTM requirement. Therefore, Cr carbide precipitation and P segregation at grain boundary, caused by higher C and P content in material, resulted in intergranular cracking of casing volute tongue. This procedure for integrity evaluation and root cause analysis is used to guide, and support the pump designer and manufacturer's material selection and process design to avoid a costly, unplanned outage of plant.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.1276-1280
• /
• 2005

The Maglav system project affects communities and are usually funded by public agencies. Evaluation of this project that considerably impact whole communities requires public involvement. This specific requirement of transportation projects determines the method of their evaluation as the impacts are estimated from the transportation economic point of view. Especially evaluation criteria must reflect the needs of the interested parties and should consider all foreseeable benefits and losses caused by the Maglav project. To select evaluation criteria and evaluation method may help a decision--maker in making a best selection for a Maglav project.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1397-1405
• /
• 2017

As the introduction of wind power is steadily increasing, negative effects of wind power become more important. To operate a power system more reliable, the system operator needs to recognize the maximum required capacity of available generators for a certain period. For recognizing the maximum capacity, this paper proposes a methodology to determine an optimal reserve requirement considering wind power, for the certain period in the mid-term perspective. As wind speed is predicted earlier, the difference of the forecasted and the actual wind speed becomes greater. All possible forecast errors should be considered in determining optimal reserve, and they are represented explicitly by the proposed matrix form in this paper. In addition, impacts of the generator failure are also analyzed using the matrix form. Through three main stages which are the scheduling, contingency and evaluation stages, costs associated with power generation, reserve procurement and the usage, and the reliability cost are calculated. The optimal reserve requirement is determined so as to minimize the sum of these costs based on the cost/reliability analysis. In case study, it is performed to analyze the impact of wind power penetration on the reserve requirement, and how major factors affect it.

• Journal of Korean Society for Quality Management
• /
• v.30 no.1
• /
• pp.162-171
• /
• 2002

A practical algorithm of generating most probable states in decreasing order of probability, given the probability of each unit\`s state, is suggested for approximating reliability(performability) evaluation of a network with multistate(multimode) units. Method of approximating network reliability for a given measure with most probable states is illustrated with a numerical example. The proposed method in this paper is compared with the previous method regarding memory requirement. Our method has some advantages for computation and achieves improvement with regard to memory requirement for a certain condition judging from the computation experiment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.5
• /
• pp.679-695
• /
• 2020

Evaluating amino acid requirements, specifically threonine requirements, in horses will enable better feed formulation and result in economic production, improved animal health, and reduced environmental pollution. However, the current knowledge of protein and amino acid requirements in horses is still limited. Because horses have a unique digestive system and consume a variety of feed ingredients, their protein digestibility may be affected than other species by different feed composition, and thus amino acid requirements are susceptible to vary between situations. Therefore, a careful evaluation of amino acid requirements with a proper method is needed for various conditions. This review will also provide comprehensive information that needs to be considered when designing an amino acid requirement study in horses.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.4
• /
• pp.459-465
• /
• 2007

This paper deals with the development of measuring methodology and the requirement for its evaluation of the infrared radiation from a naval ship to optical sensors, considering the Meteorological conditions. Factors required for measuring the apparent temperature and infrared radiation are identified and two methods are suggested based on the measuring instruments carried by ship or aircraft. and target operation in the Meteorological conditions is considered. This study describes some factors affecting the IR signature. required instruments to obtain the IR signal considering the naval ship.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1999.05a
• /
• pp.467-467
• /
• 1999

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.275-287
• /
• 1995

The rice processing complex(RPC) consisted of the rice handling, drying, storage, and milling processes. It has been established at 83 locations domestically by April 1994, and 200 of RPC will be built more throughout the country. Therefore, this study has been performed to achieve two objectives as the followings : 1) Development of mathematical models which can assess the requirement of electricity, fuel, and labor for four model systems of rice processing complex. 2) Development of a computer simulation model which produce the improved designs of RPC by the evaluation results of energy requirements of four RPC models. The results from this study are summarized as follows : 1) Mathematical models were developed on the basis of result of mass balance analysis and required power of machines for each process. 2) A computer simulation model was developed, which can produce the improved designs of RPC by the evaluation results of energy requirements. The computer simulation model language was BORLAND $C^{++}$. 3) The results of simulation showed that total energy requirements were ranged from 75.94㎾h/t to 124.30㎾h/t. 4) From the results of computer analysis of energy requirement classified by drying type, it was found that energy requirement of the drying type A{paddy rice (PR) for storage-natural air drying(15%), PR for milling-heated air drying(16%)} were less than that of the drying type B{1 step-natural air drying(PR for storage : 18%, PR for milling : 20%), 2 step-heated air drying(PR for storage : 15%, PR for milling : 16%)}. 5) The energy efficient drying method is that all the incoming rough rice to RPC should be dried by national air drying systems. If it is more than the capacity of national air drying system, the amount of surplus rough rice is recommended to be dried by the heated air drying method.