• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.195-196
• /
• 2014

Unlike general construction works, bridge construction is mostly done in a high place. The conventional deck form of bridge is installed between precast concrete girders using sleepers, bridging joints and plywoods, and after concrete is poured to the deck, the form materials are removed at high altitudes. When removing the form, it may be dropped on ground, damaging the materials and resulting in economic loss. In addition, safety accidents are likely as the works are performed in a high place, and as the manpower increases, the cost increases. Also, it is difficult to install and remove temporary equipment. Therefore, it is required to develop a system form that allows easier and quicker installation and removal by unskilled workers and ensures safety of workers. In this regard, the study is intended to analyze requirements for the system form for pouring concrete to bridge decks, which can be easily installed and removed. The study result will be used as basic information for development of the system form for pouring concrete to bridge decks.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.247-254
• /
• 2012

The management of user requirements for information system development is a key element. The traceability has been studied in a specific method as using a traceability table or SOA related to the requirement management. But there are few case about proposing a objective and quantified evaluation method and judgement criterion for none-technical business managers. This researcher has proposed, easy to access by unprofessional and objective and qualifiable, evaluation methods and criteria of Judging for adequacy of requirements reflection in the development process of information system for the government office through a previous case study. In this study, I will give consideration to study the limitations of previous studies and improve the evaluation formula for measuring the reflection of the requirements and derive, reviewed to provide a variety of criteria for each business, through business case analysis.

• Journal of Korean Elementary Science Education
• /
• v.22 no.2
• /
• pp.173-180
• /
• 2003

The purpose of this study was to investigate about current status of science field study in elementary schools. A total of 72 elementary teachers in Busan and Gyungnam districts were involved and the data from questionnaire was gathered. The questionnaire was comprised two parts: items on general level include the epistemological aspect and actual condition and items on concrete level according to chapters of elementary school science curriculum. The major findings are as follows: 1. Many teachers cognize the requirement of science field study in 7th Korean elementary school science curriculum is larger than 6th one. But they respond the actual number of science field study in 7th curriculum is nearly equal to 6th. 2. In analysis to grades, the actual number of field study decrease as grade is high. 3. In the science content aspects, the requirement of field study is the largest on biology domain and earth science domain. 4. Many teachers have pointed out “the difficulty of administration for field study” and “inappropriated surrounding of their school” as the problems of science field study in elementary school.

• Bulletin of the Korean Space Science Society
• /
• 2010.04a
• /
• pp.25.3-25.3
• /
• 2010

Our previous study used a bar-type reference mirror to measure the relative distance to the target surface. The target measurement accuracy was required to $1{\mu}m$ PV for aspheric optical surface up to 1m in diameter. Earlier system suffers from the reference surface deformation when the measuring part moves. In order to reduce the deformation, measuring part and the reference part separated from each order in the new design. This system utilizes a kinematic support assembly using invar flexure to minimize the reference surface deformation under gravity and vibration. The surface deformation requirement of reference mirror is defined as of $0.2{\mu}m$ under gravity and 40Hz vibration. The finite element results, shows reference mirror deformation of $0.164{\mu}m$. The first resonance mode was computed to analysis 46.05Hz for reference part and 43.44Hz for measuring part. Thesis satisfies the frequency requirement.

• Nuclear Engineering and Technology
• /
• v.50 no.5
• /
• pp.648-653
• /
• 2018

Elimination of soluble boron from reactor design eliminates boron-induced reactivity accidents and leads to a more negative moderator temperature coefficient. However, a large negative moderator temperature coefficient can lead to large reactivity feedback that could allow the reactor to return to power when it cools down from hot full power to cold zero power. In soluble boron-free small modular reactor (SMR) design, only control rods are available to control such rapid core transient. The purpose of this study is to investigate whether an SMR would have enough control rod worth to compensate for large reactivity feedback. The investigation begins with classification of reactivity and completes an analysis of the reactivity balance in each reactor state for the SMR model. The control rod worth requirement obtained from the reactivity balance is a minimum control rod worth to maintain the reactor critical during the whole cycle. The minimum available rod worth must be larger than the control rod worth requirement to manipulate the reactor safely in each reactor state. It is found that the SMR does have enough control rod worth available during rapid transient to maintain the SMR at subcritical below k-effectives of 0.99 for both hot zero power and cold zero power.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.767-775
• /
• 2018

To develop and check a Radar Processor Unit, checking the function and performance of the requirement is very important factor in developing Radar. General methods for verifying the Radar is simulation test, environment linkage test and field operation test, firstly, in case of requirement analysis phase, verify Radar algorithm and design by using mathematical method based simulation test method, and secondly, in case of unit test and integrated test phase, Test Equipment is set to simulate radar environment in the lab to verify radar function and performance. Lastly, field operation test phase is carried out to confirm the function and performance after it is mounted on the actual equipment. To successfully develop Radar Processor Unit, using the method of field operation test method after sufficient test cases are tested in radar environmental interlocking method in order to save cost and testing period and because of this reason, development of the Radar Processor Unit Test Equipment is becoming very important factor. In this paper, we introduce the concept of test equipment development and important factors in test equipment, which are target simulation, data processing and device interlocking.

• Steel and Composite Structures
• /
• v.38 no.4
• /
• pp.365-380
• /
• 2021

Although traditional steel-concrete composite beams have excellent structural characteristics, it cannot meet the requirement of quick assembly and repair in the engineering. This paper presents a study on static behavior of bolt connected steel-concrete composite beam without post-cast zone. A three-dimensional finite element model was developed with its accuracy and reliability validated by available experimental results. The analysis results show that in the normal service stage, the bolt is basically in the state of unidirectional stress with the loss of pretightening can be ignored. Parametric studies are presented to quantify the effects of the post-cast zone, size and position of splicing gap on the behavior of the beam. Based on the studies, suggested size of gap and installation order were proposed. It is also confirmed that optimized concrete slab in mid-span can reduce the requirement of construction accuracy.

• Journal of Daesoon Thought and the Religions of East Asia
• /
• v.3 no.1
• /
• pp.87-108
• /
• 2023

From the time it was propagated to Vietnam until it was forced to relinquish its leadership position in both politics and philosophy, Confucianism in Vietnam was never orthodox Confucianism. This study employs the theory of invented tradition to examine how Confucianism penetrated the ethnic Vietnamese community at the turn of the first millennium and points out its vital requirement: the construction of a Chinese-style centralized administrative government based on Neo-Confucianism. This requirement unfolded during the Le So Dynasty in the fifteenth century. Moreover, the theory of invented tradition can also be applied to discover the motivation behind Neo-Confucianism's process of manufacturing orthodoxy to speed up the goal of Sinicization. Somehow, the launching of the imperial examination system, meant to fulfill a system of bureaucracy, ended up resolving one of the greatest challenges of medieval times. It is to seek the ruler's uncritical submission to the ruled. This article applies hauntology to analyze two forms of Confucianism discourse in Vietnam. In doing so, this study determined that Confucianism evolved into its own unique system of thought in Vietnam and in the end, was not even recognizable as Confucianism. Throughout Vietnam's turbulent history, Confucianism shifted from a symbol of progress to one of backwardness. This culminated Vietnam's preoccupation with the de-Sinicization during the early twenty-first century.

• Journal of applied mathematics & informatics
• /
• v.7 no.2
• /
• pp.617-627
• /
• 2000

ATM networks support diverse traffic types with different service requirement such as data, voice, video and image. This paper analyzes a dynamic priority queue to satisfy Quality of Service (QoS) requirements of traffic. to consider the burstiness of traffic, we assume the arrival to be a Markovian arrival process(MAP) . Performance measures such as loss and delay are derived, Finally, some numerical results show the performance of the system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.260-263
• /
• 2008

최근 들어 헬쓰케어 서비스나 웨어러블 컴퓨터 등에 대한 연구가 진행됨에 따라 몸에 장착된 디바이스들을 무선으로 연결하기 위한 WBAN기술이 주목을 받고 있다. 향후 네트워크 환경은 개인의 다양한 생체정보 등을 기반으로 최적의 맞춤형 서비스를 제공하는 IT-BT-NT 융합서비스 환경으로 진화할 것이므로 WBAN기술의 활용성은 더욱 높아질 것이다. 따라서 본 논문에서는 안전한 WBAN환경 구축을 위해서 발생이 예상되는 보안 이슈를 분석하고 이를 해결하기 위한 보안 요구사항을 제안하였다.