• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.65-72
• /
• 2009

‘Korean Highway Bridge Design Code’ provides the spectrum analysis method with response modification factors for the seismic design of typical bridges. However, considering that korean peninsula is classified as moderate seismic regions and domestic circumstances for bridge design and construction are different from other countries, the applicability of this code is not yet proved. Therefore it is required to verify that applying the spectrum analysis method fulfills the no collapse requirement which is set forth as the basic seismic design concept. In this study two typical bridges with T and ${\prod}$ type piers are selected as analysis bridges and seismic designs are carried out by applying the spectrum analysis method with design conditions given for moderate seismic regions. Based on the results obtained through deign procedures, the role of the response modification factors and fulfillment of the no collapse requirement are discussed, from which supplementary provisions for the design code are identified.

• Journal of The Korean Association of Information Education
• /
• v.21 no.2
• /
• pp.219-230
• /
• 2017

In this study, we developed a data science education program using spreadsheet, applied it after educational method to improve elementary school student 's Computational Thinking, and then verified its effect. Based on the results of preliminary requirement analysis conducted by Rossett's request analysis the educational program was developed based on the procedure of the ADDIE model which is the representative model of the teaching design based on the result of prior requirement analysis of 205 elementary school students and computer teaching major 20 incumbent elementary school teachers, applying Rossett's requirement analysis model. In order to verify the effect of the developed educational program, we are promoting 42 hours of lecture for a total of 6 days for 20 students of applicants who volunteered for volunteer votes of educational donation programs implemented at ${\bigcirc}{\bigcirc}$University, We analyzed the educational effect using the results of pre-post test. As a result of the analysis, we learned that the educational program developed in this study is effective for improving elementary school student 's Computational Thinking.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.1
• /
• pp.165-173
• /
• 2023

Various linear system solvers with multi-physics analysis schemes are compared focusing on the near-field region considering thermal-hydraulic-chemical (THC) coupled multi-physics phenomena. APro, developed at KAERI for total system performance assessment (TSPA), performs a finite element analysis with COMSOL, for which the various combinations of linear system solvers and multi-physics analysis schemes should to be compared. The KBS-3 type disposal system proposed by Sweden is set as the target system and the near-field region, which accounts for most of the computational burden is considered. For comparison of numerical analysis methods, the computing time and memory requirement are the main concerns and thus the simulation time is set up to one year. With a single deposition hole problem, PARDISO and GMRES-SSOR are selected as representative direct and iterative solvers respectively. The performance of representative linear system solvers is then examined through a problem with an increasing number of deposition holes and the GMRES-SSOR solver with a segregated scheme shows the best performance with respect to the computing time and memory requirement. The results of the comparative analysis are expected to provide a good guideline to choose better numerical analysis methods for TSPA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12A
• /
• pp.951-957
• /
• 2003

The analysis of RF performance requirement conditions on communication system is critical indicator to predict the performance of system. UWB(Ultra Wide Band) system which the standard is not established yet is difficult to derive the precise system performance requirement condition. Also, there are differences between conventional UWB system and multi-band system about RF performance requirement condition. In this thesis, the differences are analyzed and performance requirement conditions of multi-band UWB system are described on the basis of the differences. Throughput, maximum transmit power, and sensitivity of multi-band UWB system is varied with respect to the number of Sub-Bands. In addition, because of Multi-path effect, if PRF(Pulse Repetition Frequency) is changed, the Multi-path link margin is happened to compensate for Multi-path Energy Loss which is contributed by increasing of the Link Margin. According to Multi-path Margin, the variation of the resistance with respect to sensitivity and interference signal is observed and analyzed through the simulation.

• Journal of Korean society of Dental Hygiene
• /
• v.5 no.1
• /
• pp.1-13
• /
• 2005

The study aimed to estimate the importance of job tasks, job training requirement and work satisfaction felt by dental hygienists to help dental hygienists work efficiently and effectively. A total of 142 dental hygienists working in dental hospitals located in J participated in the study. A SPSS 10.10 for Windows was used for statistical analysis. The statistical significance was defined as ${\alpha}$=.05. The results of the study are summarized as follows: 1. The mean score for the importance of job tasks was 4.09. The respondents considered dental clinic management and assistance to dentists the most important among their job descriptions showing the mean score of 4.44. The need for job training was 4.15 in average. The respondents wanted to have training on how to make a dental health insurance claim to receive payment other than any training with the mean score of 4.42. The work satisfaction of the respondents was 3.65 in average. The respondents were most satisfied with their work in dental assistance. 2. By the category of job tasks, the levels of importance of job tasks, job training requirement and work satisfaction were higher in plague removal with an ultrasonic scaler related to clinical oral prophylaxis, pit and fissure sealants related to preventive dental treatment and instruction in the correct usage of toothbrush related to public dental health education 3. In dealing with dental radiation machines, the radiation protection was considered the most important. While the training for periapical radiography was most needed, the respondents were satisfied with working in the same area. The levels of job importance, training requirement and work satisfaction were high in preventive dental care in the community performed in relation to the public dental health care. 4. In the dental health insurance claim category, the levels of importance of job task, training requirement and work satisfaction were higher in insurance claiming. The levels of job importance and training requirement were high in dental clinic management and assistance to dentists performed for preventive dental treatment. The work satisfaction was higher in maintaining medical chart records. The levels of job importance, training requirement and work satisfaction were higher in dental assistance in relation to dental protection. 5. There was significant relationship between the level of importance and work experience. Those with a longer period of work experience had higher levels of job importance in dental health insurance claim, dental clinic management and assistance to dentists and the overall task(pE0.05). 6. A significant relationship was observed between the need for job training in dental cleaning and preventive dental treatment and work experience. Those with more than 8 years of work experience demonstrated that job training is most needed(pE0.05). 7. The work satisfaction level was higher in the group with more than 8 years of work experience, compared with those in other work experience periods(pE0.05). 8. A positive correlation was seen between the level of importance and the need for job training among three variables.

• 시스템엔지니어링워크숍
• /
• s.1
• /
• pp.32-39
• /
• 2003

This work describes a study of analysis and evaluation activities applied systems engineering approach. It is presented technique of derivation and management requirement. A scheme of the defence project analysis and evaluation using a systems engineering process is described.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.10
• /
• pp.1386-1390
• /
• 2009

A dose-response experiment with five lysine levels (0.65, 0.80, 0.95, 1.10, and 1.25%) was conducted to evaluate the lysine requirement of male White Pekin ducklings from 7 to 21 days of age. Two hundred and eighty, 7-day-old, male White Pekin ducklings were allocated to 5 experimental treatments, each containing 8 replicate pens with 7 birds per pen. Feed and water were provided ad libitum from 7 to 21 days of age. At 21 days of age, weight gain, feed intake, feed/gain, breast meat weight, and breast meat yield relative to body weight of ducklings from each pen were all measured. As dietary lysine level increased, weight gain, feed intake, feed/gain, breast meat weight, and breast meat yield of ducklings were all improved significantly (p<0.05). According to broken-line regression analysis, the lysine requirement of male White Pekin ducklings from 7 to 21 days of age for weight gain, feed/gain, breast meat weight, and breast meat yield was 0.84, 0.90, 0.97, and 0.98%, respectively. Considering that Pekin duck production is directed to meat production, the lysine requirement of male starter Pekin ducklings during this period is suggested to be 0.98%.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2002.06a
• /
• pp.123-135
• /
• 2002

Being in era of the digital economy, the influence of IT that effects on our economy is getting greater. Along with this effect, IT becomes origin of predominance of competition in every category of industry. Regarding new trends in industry, how companies mutate their IT skill become important factor. Every industry has their own color and environment of IT and uncertainty is different. For a company, It is most important to plan own strategy with strategic view on industrial environment. The idea of this study is to find the difference of Skill Requirement and Job Requirement in every category of industry by find what are the most important jobs and skills of IT in every industry and to analyze the results. The second idea is to find what kinds of skill are required in every sector of job. Base on the analyzed data, we classified the uncertainty in every industry by Duncan′s "classification of environment", and extracted some pattern within the skill and job in industry that found in our study by applying OIP model. We set skills by categorized curriculum of specialized IT education center, then with IT specialist, checked and retouched the results and surveyed with IT people in every industry on skill set and job of IT. The summery of this study is as follow : 1. Importance of IT skill is differentiated in each industry. It shows that IT skills, which requested in a field are differentiated by uncertainty of environment that comes from the character of industry. 2. Importance of IT job differs by the fields of industry. It shows as IT skills are differentiated, the importance of job that apply these skills is differentiated. 3. As the character of each job that work on is diversified, the importance of skills are diversified in each field of jobs. The Result of this study can give the idea to who designs curriculum and builds educational contentsthat would fulfill the need of fields. Also this study would be meaningful that it opens the field of study of skill requirement in Korea.

• Journal of Korean Clinical Nursing Research
• /
• v.18 no.2
• /
• pp.183-195
• /
• 2012

Purpose: This study was performed to identify the variations of nursing care cost depending on nursing care requirement and calculate nursing care cost per one day and one care requirement point. Methods: Nursing care requirement was measured by classifying 3,855 patients according to KPCS-1(Korean Patient Classification System for nurses-1). Nursing care cost was calculated from personnel expenses and nursing care requirement. Nursing cost factors were identified by multiple regression analysis. Results: Average nursing cost per patient per day was 33,588 won, Average nursing care cost per 1 patient classification score was 3,558 won. The nursing cost per 1 patient classification score was different depending on the types and levels of the hospitals. The 4th patient classification group revealed the highest nursing care cost. Nursing cost factors included the number of beds in the hospitals, seniority, number of nurses and first grade in nurse personnel accreditation ($adj-R^2$ 74.0%. p<.05). Conclusion: Nursing care requirements expressed by patient classification scores don't directly correlate with nursing care cost. Further research is needed to evaluate validity and reliability for refining KPCS-1 and to apply variable criteria to nurse personnel accreditation.

• The KIPS Transactions:PartD
• /
• v.9D no.4
• /
• pp.651-658
• /
• 2002

This paper suggests the scenario composition supporting method, which can be used to perform integration test based on specification, and implemented a scenario composition supporting tool. To compose scenario for object-oriented integration testing, requirement specification, Process definition table and program to table relation diagram are used. In addition, requirement trace table is created. It can check user's requirements, quickly and exactly, dividing former three fables into the stages of requirement analysis, design, and test. The output of scenario composition supporting tool plays a guide part in composing scenario. This tool can reduce scenario composition effort of quality for the checking team and prevent an omission of requirement and input of errors during the test.