• 한국항공우주학회지
• /
• 제40권3호
• /
• pp.237-242
• /
• 2012

극저온이 요구되는 우주용 탑재장비의 냉각을 위해 일반적으로 Pulse Tube-type 압축기가 적용되고 있으며, 궤도상에서 압축기의 냉각성능, 임무수명 및 비대칭 온도분포에 의한 미소진동발생 방지를 위해 압축기를 허용온도 범위로 유지하는 열제어가 필요하다. 압축기는 궤도 운용 시 미소진동을 발생하여 관측성능이 요구되는 탑재체의 지향성능을 저하시키는 원인으로 작용한다. 본 논문에서는 압축기의 미소진동 방지를 목적으로 적용된 진동절연기의 성능유지 및 압축기의 허용온도범위 유지를 위한 열제어 성능을 동시에 만족하는 우주용 압축기 조립체의 열설계를 제안하였으며, 설계의 유효성을 해석적으로 입증하였다.

• 한국태양에너지학회 논문집
• /
• 제34권5호
• /
• pp.33-41
• /
• 2014

Heliostat field in a tower type solar thermal power plant is the sun tracking mirror system which affects the overall efficiency of solar thermal power plant most significantly while consumes a large amount of energy to operate it. Thus optimal operation of it is very crucial for maximizing the energy collection and, at the same time, for minimizing the operating cost. Heliostat field operational algorithm is the logics to control the heliostat field efficiently so as to optimize the heliostat field optical efficiency and to protect the system from damage as well as to reduce the energy consumption required to operate the field. This work presents the heliostat field operational algorithm developed for the heliostat field of 200kW solar thermal power plant built in Daegu, Korea. We first review the structure of heliostat field control system proposed in the previous work to provide the conceptual framework of how the algorithm developed in this work could be implemented. Then the methodologies to operate the heliostat field properly and efficiently, by defining and explaining the various operation modes, are discussed. A simulation, showing the heat flux distribution collected by the heliostat field at the receiver, is used to show the usefulness of proposed heliostat field operational algorithm.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권7호
• /
• pp.414-420
• /
• 2003

The domestic needs for larger capability of power sources are increasing to cope with the expanding power load which results from the industrial developments & the progressed life style. In summer, the peak load is mainly due to the non-industrial reasons such as air-conditioners and other cooling equipments. To cover the concentrated peak load in stable, the power transmission lines should be more constructed and efficiently operated. The ampacity design of the underground cable system is generally following international standards such as IEC287, IEC60853 and JCS168 which regards the shape of 100% daily full power loads. It is not so efficient to neglect the real shapes of load curves generally below 60~70% of full load. The dynamic (real time) rating system tends to be used with the measured thermal parameters which make it possible to calculate the maximum ampacity within required periods. In this paper, the CTM(Conductor Temperature Monitoring) which is the base of dynamic rating systems for tunnel environment is proposed by a design of lumped thermal network ($\pi$-type thermal model) and distribution temperature sensor attached configuration, including the estimation results of its performances by load cycle test on 345kV single phase XLPE cable.

• Geomechanics and Engineering
• /
• 제32권2호
• /
• pp.233-244
• /
• 2023

With the increasing amount of resources required by the society development, mining operations go deeper, which raises the requirements of studying the effects of temperature on the physical and mechanical properties of coal and adjacent rock. For now, these effects are yet to be fully revealed. In this paper, a mechanical-electromagnetic radiation (EMR) test system was established to understand the mechanical deterioration characteristics of coal by the effect of thermal treatment and its deformation and fracture characteristics under thermo-mechanical coupling conditions. The mechanical properties of high-temperature-treated coal were analyzed and recorded, based on which, reasons of coal mechanical deterioration as well as the damage parameters were obtained. Changes of the EMR time series under unconstrained conditions were further analyzed before characteristics of EMR signals under different damage conditions were obtained. The evolution process of thermal damage and deformation of coal was then analyzed through the frequency spectrum of EMR. In the end, based on the time-frequency variation characteristics of EMR, a method of determining combustion zones within the underground gasification area and combustion zones' stability level was proposed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권5호
• /
• pp.568-576
• /
• 2017

With an increase in the usage of LNG, there is a heightened interest about its safety aspects regarding the explosion of LNG carrier tank. The need for a cryogenic explosion-proof camera has increased. The camera has to work in cryogenic environment (below $-160^{\circ}C$) in LNG carrier. This study conducted design and heat transfer analysis of cryogenic camera to secure working time in limitation of heat source. The design with gap width of double pane windows was conducted based on simple vertical cavity model to insulate from cryogenic environment. The optimal gap width was 12.5 mm. For effective analysis considering convection within the camera, equivalent thermal conductivity method was adopted with ABAQUS. The working time of the camera predicted was over 10 h at warm-start condition. In cold-start condition, it required about 5 h of pre-warming time to work. The results of analysis were compared with the ones of the actual cryogenic test.

• 감성과학
• /
• 제17권2호
• /
• pp.55-62
• /
• 2014

본 연구에서는 PMV 온열환경이 변화함에 따라 LED광원의 조도가 시작업 성능에 미치는 영향을 분석하기 위해 오류검색수정작업 평가지를 개발하였고, 오류검색수정작업의 정확도 및 소요시간을 분석하였다. 또한 작업을 진행하면서 느끼는 시각피로도에 대한 설문을 실시하여 주관적인 평가도 병행하였다. 본 실험의 PMV 온열환경은 온도 $17{\pm}1{\sim}29{\pm}1^{\circ}C$, 습도 $50{\pm}5{\sim}60{\pm}5%$의 범위에서 PMV 값에 따라 4가지 형태를 구성하였으며, LED광원의 조도는 400lx, 700lx, 1000lx의 3가지 형태로 구성하여 실험을 진행하였다. 오류검색수정작업의 정확도(LED p 값=0.058, PMV*LED p값=0.083) 및 소요시간(LED p값=0.004, PMV p값=0.000)은 PMV 온열환경과 LED광원의 조도 변화에 모두 유의하였으나, 피로도는 PMV 온열환경(p값=0.003)과 유의한 차이를 보였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.80-85
• /
• 2009

Mathematical modeling and performance simulation results were shown for the solar thermal storage system which used heat pipe. The thermal storage system was composed of thermal storage tank and charging/discharging heat exchanger with one by the heat pipes. Heat pipe heat exchanger was attached to system, and could carry out charging and discharging to thermal storage tank at the same time. Height of the thermal storage tank was 600 mm, and that of the charging/discharging heat exchanger was 400 mm. Length of the heat pipe was the same as the total height of thermal storage system, and outer and inner diameter were 25.4 mm(O.D.) and 21.4 mm(I.D.) respectively. Diameter of the circular was 43 mm(O.D.), and fin geometries were considered as the design parameters. High temperature phase change material(PCM), $KNO_3$ and low temperature PCM, $LINO_3$ were charged to storage tank to adjust working temperature. Total size of thermal storage system able to get heat capacity more than 500 kW was calculated and the results were shown in this study. Number of heat pipe was required more than maximum 500, and total length of thermal storage system was calculated to the more than maximum 3 m at various condition.

• 유기물자원화
• /
• 제30권4호
• /
• pp.5-13
• /
• 2022

현대의 환경문제는 다량의 폐기물의 발생과 무분별한 에너지의 소비로 인한 환경오염이 가속화 되고 있다는 것이다. 대표적인 에너지 생산 연료인 화석연료는 에너지를 생산하는 과정에서 연소가 이루어져 다량의 온실가스가 발생하고 최종적으로 기후변화를 야기한다. 또한 전 세계적으로 발생하는 폐기물의 양도 지속적으로 증가하고 있으며 처리하는 과정에서 환경오염이 발생하고 있다. 이와 같은 문제들을 동시에 해결하기 위한 방법 중 하나는 유기성 폐기물의 에너지화 및 감량화이다. 하수처리장에서 발생하는 하수슬러지는 해양매립이 전면 금지된 이후로 다양하게 처리되고 있으나, 그 발생량은 지속적으로 증가하는 추세이다. 하수슬러지는 유기물을 다량 함유하고 있어 혐기소화를 통하여 하수슬러지를 에너지화 하고 최종 배출되는 폐기물을 감량화 하는 것이 바람직하다. 하지만, 잉여슬러지의 경우 대부분이 하수처리에 이용되었던 미생물 덩어리로써 잉여슬러지가 혐기성소화 되기 위해서는 먼저 미생물의 세포벽이 파괴되어야 하는데 세포벽 파괴에는 많은 시간이 요구되기 때문에 혐기성 소화 과정만으로는 높은 바이오가스 생산율이나 폐기물 감량율을 달성할 수 없다. 따라서 잉여슬러지를 가용화하는 전처리 공정이 필요하며, 여러 가지 가용화 공법 중에서 열적 가용화 공정이 가장 효율적인 것으로 검증되었고, 혐기성소화 공정의 전처리 과정으로써 열적가용화 공정을 이용하여 잉여슬러지에 포함된 세포벽을 파괴한 후 전처리 된 잉여슬러지를 혐기성소화 함으로써 높은 바이오가스 생산율과 폐기물 감량율을 달성할 수 있다. 본 연구에서는 열적 가용화장치를 통하여 TS 10%의 농축 잉여슬러지를 전처리하는데 있어서 체류시간 및 운전온도 변수에 따른 가용화 특성에 대한 연구를 수행하였다. 열적 가용화장치의 체류시간에 대한 실험변수는 운전온도를 160 ℃로 고정한 상태에서 각각 30분, 60분, 90분, 120분이었다. 실험 결과로 도출된 TCOD와 SCOD를 통해 계산된 가용화율은 각각 12.11%, 20.52%, 28.62%, 31.40% 순으로 증가하였다. 또한, 운전온도에 따른 변수는 반응시간을 60분으로 고정한 상태에서 각각 120℃, 140℃, 160℃, 180℃, 200℃였으며 가용화율은 각각 7.14%, 14.52%, 20.52%, 40.72%, 57.85% 순으로 증가하였다. 이 외에 TS, VS, T-N, T-P, NH₄⁺-N, VFAs를 분석하여 농축 잉여슬러지를 대상으로 하는 열적 가용화 특성에 대한 평가를 수행 했으며, 그 결과 TS 10%의 농축 잉여슬러지에 대한 열적 가용화를 통하여 30% 이상의 가용화율을 얻기 위해서는 운전온도를 160℃로 고정할 경우 120분의 체류시간이 필요하며, 운전시간을 60분으로 고정할 경우 170℃ 이상의 운전온도가 요구되어 진다.

• 복합신소재구조학회 논문집
• /
• 제6권1호
• /
• pp.21-29
• /
• 2015

Other countries(USA, Europe) have performed the fire resistance design of buildings by the alternative performance design methods, which are based on fire engineering theories. However, in Korea, the process on the alternative fire resistance performance design has only suggested without any applications for real steel structures. Therefore, In the case of steel structures stagnant research on refractory measures face difficulties in introducing fire resistance design. In this study, first of all, Intumescent paint was analyze the thermal properties(thermal conductivity, specific heat and density). In Sequence, using the section factor by H-standard section propose of section concrete filled steel tube and hollow. finally presents a reasonable thickness Intumescent paint takes time to target performance of the proposed cross-section steel tube.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.842-850
• /
• 2003

The suspension insulators are subjected to harsh environments in service for a long time. The long-term reliability of tile insulators is required for both mechanical and electrical performances. This study describes some basic performance tests and accelerated aging test by cool-heat cycling methods and thermal mechanical performance test methods on alumina porcelain insulators (new and aged) used for transmission line in KOREA. There was no fail in electrical and mechanical performance tests such as a high voltage strength, a flashover voltage, and an impact strength in all samples. But in the case of accelerating aging tests which have above 9$0^{\circ}C$ temperature gradient, fracture phenomena was happened by a thermal shock in tile aged sample(sample A) with low alumina porcelain body. It was indicated that sample A was more severely aged than other samples. According to results of HRB test and microstructural analysis, it was reasoned that insulator bodies with the matrix reinforced with alumina crystalline phase have advantages over the suppression of crack advance. And cool-heat aging and mechanical thermal ageing tests shows that a temperature gradient is more effective to accelerating than a cycling number.