• The korean journal of orthodontics
• /
• v.35 no.5 s.112
• /
• pp.341-350
• /
• 2005

The Purpose of this study was to compare the degree of vortical head rotation and to evaluate the reproducibility of natural Head posture (NHP) according to two guiding methods, the head posture aligner (HPA) method and the solf balance posture (SBP) method. The subjects consisted of 30 adults. On the first day. lateral and frontal cephalometric radiographs were obtained through the two guiding methods. One mouth later. lateral and frontal cephalometric radiographs were obtained again through both guiding methods. The degrees of vertical head rotation of both guiding methods were compared and the reproducibility was evaluated for each guiding method. A comparison of the degrees of vortical head rotation for the two methods revealed that the vertical head posture was lower in the SBP method than in the HPA method by an average of $2.79^{\circ}$. All measurements obtained using the HPA and SBP methods with a time interval of one north did not show any significant difierence in lateral and frortal cephalometric radiographs. The results of the present study suggest that the SBP method may be used as an alternative to the HPA method in case the HPA method can not be applied.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.735-742
• /
• 2019

Drought is a social phenomenon in which the degree of perception varies depending on the affected factors, and is defined as various relative concepts such as meteorological drought, hydrological drought, agricultural drought, and climatological drought. In this study, a comparative analysis of meteorological drought among variously defined droughts was conducted and the applicability of the drought index was examined by comparing the actual drought cases and the results of meteorological drought index analysis. In order to compare the drought index, we used standardized Precipitation Index (SPI), China-Z Index (CZI), Modified CZI (MCZI) and Z-Score Index Respectively. Four drought indices were used for the Taebaek and Sokcho areas. The drought index was analyzed using the meteorological data from 1986 to 2015 for a duration of 3 months. As a result of the analysis, the SPI drought index was analyzed to be highly reproducible for the case of drought with past limited water series. In the case of CZI and MCZI drought indices, the number of extreme dry occurrences is similar to that of the past cases, but the reproducibility is low for the actual drought years. In the case of ZSI drought index, it is analyzed that the number of occurrences and the comparison with the past cases are inferior in reproducibility. For the meteorological drought index using precipitation, it would be effective to use the SPI drought index with the highest reproducibility and the past drought case.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.5
• /
• pp.21-27
• /
• 2008

Despite recent studies on development of pulse diagnosis systems and needs for commercializing them, the reproducibility is one of the most controversial issues as ever. Because the pulse pressure value, which is one of the important parameters to evaluate reproducibility, is very vulnerable to moving artifacts, the reproducibility can not be obtained easily. In this paper, we suggested a moving artefacts detection system for a pulse diagnosis system so that a pulse diagnosis system can be robust to theses kinds of artefacts by excluding the contaminated parts from the pulse wave signal to be analyzed. This moving artifacts detection system was designed to consist of a three-axis accelerometer, an electromyography amplifier and a two-axis tilt sensor. To assess the suitability of the system, we examined the characteristics of each sensor's output signals with regard to the three specific motions such as extension, flexion and rotation. And, we also examined the each sensor's response to the high-frequency and low-frequency moving artifacts while the pulse wave signal was acquired from a pressure sensor for the pulse diagnosis. From these results, we could find that the response to subject's motions would be reflected in electromyography signal first, in accelerometer signals and in tilt sensor sequently. And, the facts that a stable pulse wave can be acquired in two seconds after high frequency or low frequency motions ended, were also found. Consequently, based on these findings, we set up some rules on the moving artifacts detection and designed an algorithm which is fit for our moving artifacts detection system.

• Journal of Environmental Health Sciences
• /
• v.45 no.3
• /
• pp.285-294
• /
• 2019

Objectives: For suitable risk management of the domestic aquatic environment, it is necessary to conduct toxicity tests using species native to Korea. In the present study, we performed toxicity ring tests using endemic freshwater arthropoda Neocaridina denticulata and evaluated its validity and reproducibility as an international standard test species. Methods: To evaluate the sensitivity levels of N. denticulata to hazardous chemicals, toxicity values for several chemicals were compared with other standard test species. Intra- and inter-laboratory acute toxicity tests were performed both within a single laboratory and among four laboratories respectively using 3,4-Dichloroaniline, which is generally used as a reference test substance in fish toxicity tests. In addition, intra- and inter-laboratory coefficient of variations (CVs) were calculated to evaluate reproducibility based on the estimated toxicity values. Results: The sensitivity of N. denticulata to several chemicals was found to be similar with D. manga, indicating that the species is valid as a test species. The CVs of the intra- and inter-laboratory tests were 22.946% with four qualified runs and 8.828% among the four laboratories, respectively. Conclusions: N. denticulata serves in an important role in the food chain of Korean aquatic ecosystems and also inhabits several other Asian countries. Since the validity and reproducibility of the species were confirmed as a toxicity test species in this study, further efforts are needed to establish N. denticulata as the international standard test species for the appropriate risk assessment of aquatic ecosystems at home and abroad.

• Journal of Oral Medicine and Pain
• /
• v.20 no.2
• /
• pp.291-306
• /
• 1995

Mandibular movement is composed of border movement and functional movement. Border movement such as maximal mouth opening, hinge opening ad lateral eccentric movement has good reproducibility, but functional movement such as chewing, swallowing and speech has also reproducibility. Especially for chewing movement, individual reproducibility has been confirmed by many studies. Study of chewing pattern is still in controversy. In new approach for raising the diagnostic value, numeric parameters and morphologic characteristics could be used for evaluation of chewing pattern. This study was performed to investigate the differences between chewing pattern in controls and in patients with temporomandibular disorders. Sixty-three patients with temporomandibular disorders participated in this study, and they were divided into unilaterally affected subjects or bilaterally affected subjects. Then unilaterally affected subjects were classified into closed lock group, disk displacement with reduction group, and degenerative joint disease group. For recording of chewing pattern, subjects were asked to chew one piece of presoftened chewing gum on both sides, and the chewing movement was recorded with the Electrognatho- Graphy(Bio-Research Associates Inc., U.S.A.). Tooth contact pattern for occlusal stability (Total left-right statistics )was also recorded with T-Scan(Tekscan Co., U.S.A.). The dta related to chewing pattern and total left-right statistics were statistically analyzed by SAS/stat program. The obtained results were as follows : 1. In patient group, mean value of A-P distance and the ratio of A-P distance to vertical distance were larger than control group, but the value of lateral distance in affected side and the closing velocity in unaffected side were smaller than that of control group, respectively. 2. In case of unilateral affected patients, chewing pattern of other side had tendency to restricted movement and slow velocity in closed lock group or degenerative joint disease group than control group or disk displacement with reduction group. 3. In bilateral degenerative joint disease patients, contralateral side had tendency to large range of motion and slow chewing velocity than preferred chewing side. 4. The patients with restricted mouth opening below than 35mm had higher value of total left-right statistics than patient group mouth opening above 35mm. Also closed lock group had higher total left-right statistics than disk displacement with reduction group, degenerative joint disease group and control group. 5. There was some difference in morphologic characteristics of chewing pattern between in control group and in affected side of unilateral patient group, but no difference between control group and unaffected side of unilateral patient group. 6. There were positive correlations between vertical distance and A-P distance, between vertical distance and chewing velocity, between A-P distance and chewing velocity, and between opening velocity and closing velocity in unilateral affected patients.

• Journal of the Korean Society of Radiology
• /
• v.16 no.3
• /
• pp.211-216
• /
• 2022

In radiation therapy, accurate Quality Assurance (QA) is required to irradiate tumor tissue while minimizing damage to normal tissue. Therefore, a dosimeter that can accurately measure radiation is needed. The purpose of this study is to develop a highly efficient radiation dosimeter with high sensitivity by applying a particle in binder method that can reduce manufacturing costs and simplify processes to perovskite materials that are cheaper and simpler to manufacture. By evaluating the response characteristics to high-energy photon, the applicability of QA dosimeter to radiation therapy was evaluated. As a result of reproducibility evaluation, RSD at 6 MV energy was presented as 1.178% and 15 MV energy was presented as 1.141%. As a result of linearity evaluation according to linear regression analysis, R² values of 0.9999 were presented under each condition of 6 MV and 15 MV energy. It was found that the CsPbBr₃ dosimeter manufactured based on the results of reproducibility and linearity evaluation is highly applicable as a QA dosimeter in the field of therapeutic radiation. The CsPbBr₃ dosimeter manufactured in this study presented more than the standard performance in the evaluation of reproducibility and linearity, and it can be used as a radiotherapy QA dosimeter through improvement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.928-934
• /
• 2008

The objective of this study is to investigate the dyeing properties of safflower yellow dye on silk for the standardization of dyeing process and color reproducibility. Yellow colorants were water-extracted from safflower petals, concentrated, and freeze-dried to obtain colorants powder. The effects of dye concentration, dyeing temperature, and pH of dye bath were studied in terms of dye uptake and shade. Fastness to dry cleaning and light was evaluated. Dye uptake increased with raising temperature and brighter and more vivid yellow shade was obtained when dyed at $30^{\circ}C$. As colorants concentration increased, dye uptake increased progressively and the shade got darker and deeper. Maximum color strength was obtained at pH 3.5. It was speculated that the adsorption of colorants seemed to occur mainly by hydrogen bonding and physical force at pH 5.5 and by ionic bonding as well as hydrogen bonding below isoelectric point(pH 3.8-4.0). The results of reproducibility test showed acceptable color difference in the range of $1.11{\sim}2.01$. Washing fastness was fairly good as 4/5 rating, while light fastness was 2/3 rating.

• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.1
• /
• pp.39-46
• /
• 2010

Purpose: To assess the reliability for measuring the back vertex power of soft contact lenses by dry blotting and wet cell method using an auto-lensmeter. Methods: The soft contact lenses used for measurement were 5 types that were distributed in Korea, and 4 back vertex powers (-1.50D, -3.00D, -6.00D, -9.00D) were used. and repeatability and reproducibility were evaluated by measuring them with an auto-lensmeter by two examiners. Results: Measured powers by dry blotting method were ranged in mean differences from 0.03D to 0.18D for overall lenses, 0.10D to 0.18D for silicone hydrogel lenses, 0.03D to 0.08D for hydrogel lenses. The mean differences between two examiners were less than 0.10D, and the inter-examiner reproducibility was good for dry blotting method. The mean difference between powers determined by wet cell method were 0.09D to 0.69D, the mean differences between two examiners were 0.02D to 0.59D. The reliability of measurements and inter-examiner reproducibility were less than dry blotting method. Conclusions: The reliability of measurements for all materials was better in dry blotting than wet cell method, the re liability of measurements for silicone hydrogel lenses was low in both methods. In clinical practical which requires quick checking of back vertex power using an auto-lensmeter. dry blotting method is thought to be more efficient than wet cell one.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.513-518
• /
• 2022

Electron beam quality assurance (QA) should be done regularly for accurate radiation therapy. However, QA tools used in clinical practice are designed mainly for X-rays. So, a dosimeter for electron beam QA is required. Therefore, in this study, the electron beam detection performance was measured by using a thorium bromide material as an electron beam sensor. In addition, it was evaluated whether it could be applied with an electron beam QA dosimeter. Reproducibility, linearity, and dose rate dependence were evaluated at 6 MeV and 9 MeV energies. As a result of reproducibility, it showed a maximum output change of 0.92% at 6 MeV and 1.15% at 9 MeV. The linearity result evaluation and determination coefficient were presented as 0.9998. As a result of dose rate dependence evaluation, relative standard deviation 0.51% at 6 MeV and relative standard deviation 1.07% at 9 MeV were presented. The manufactured TlBr sensor shows the ability to detect radiation that meets the criteria for evaluation of reproducibility, linearity, and dose rate dependence. These results mean that the TlBr dosimeter is applicable as an electron beam QA dosimeter.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.2
• /
• pp.197-202
• /
• 2013

Purpose: This research was performed to measure and analyze scotopic pupil size in myopes and to figure out the factors that influence it. Methods: The pupil size of 191 healthy myopic subjects were measured with the pupillometer (Colvard pupillometer, OASIS medical, USA) in scotopic and analyzed with the age, corneal size, spherical equivalent refractive error, corneal curvature. In addition, it was compared with the measurements of intra-examiner and inter-examiner to verify reproducibility of pupillometer. Results: The mean (${\pm}$SD) scotopic pupil size was $6.64{\pm}0.68$ mm (range, 5.00~8.00 mm), the lower age and the larger corneal size, The bigger the pupil size. The lower spherical equivalent refractive error and steepper corneal curvature tends to be smaller. The reproducibility of intra-examiner and inter-examiner in pupillometer showed the reliability highly (Guttman splithalf point > 0.91). Conclusions: The pupil size associated with age, corneal size, spherical equivalent refractive error and corneal curvature in scotopic condition. It can refer to prevent inconvenience that may occur RGP contact lenses, cataract surgery and refractive surgery.