• Restorative Dentistry and Endodontics
• /
• 제47권4호
• /
• pp.36.1-36.17
• /
• 2022

Objectives: This study aimed to evaluate the effect of aging on the marginal quality of glass hybrid (GH) material used to elevate dentin gingival margins, and to analyze the consistency of the results obtained by 3 in vitro methods. Materials and Methods: Ten teeth received compound class II cavities with subgingival margins. The dentin gingival margins were elevated with GH, followed by resin composite. The GH/gingival dentin interfaces were examined through digital microscopy, scanning electron microscopy (SEM) using resin replicas, and according to the World Dental Federation (FDI) criteria. After initial evaluations, all teeth were subjected to 10,000 thermal cycles, followed by repeating the same marginal evaluations and energy dispersive spectroscopy (EDS) analysis for the interfacial zone of 2 specimens. Marginal quality was expressed as the percentage of continuous margin at ×200 for microscopic techniques and as the frequency of each score for FDI ranking. Data were analyzed using the paired sample t-test, Wilcoxon signed-rank test, and Pearson and Spearmen correlation coefficients. Results: None of the testing techniques proved the significance of the aging factor. Moderate and strong significant correlations were found between the testing techniques. The EDS results suggested the presence of an ion-exchange layer along the GH/gingival dentin interface of aged specimens. Conclusions: The marginal quality of the GH/dentin gingival interface defied aging by thermocycling. The replica SEM and FDI ranking results had stronger correlations with each other than either showed with the digital microscopy results.

• Geomechanics and Engineering
• /
• 제12권5호
• /
• pp.771-783
• /
• 2017

Using a transparent fracture replica with aperture size and water-cement ratio (w/c), the factors affecting the penetration behavior of rock grouting were investigated through laboratory experiments. In addition, the waterproof efficiency was estimated by the reduction of water outflow through the fractures after the grout curing process. Penetration behavior shows that grout penetration patterns present similarly radial forms in all experimental cases; however, velocity of grout penetration showed clear differences according to the aperture sizes and water-cement ratio. It can be seen that the waterproof efficiency increased as the aperture size and w/c decreased. During grout injection or curing processes, air bubbles formed and bleeding occurred, both of which affected the waterproof ability of the grouting. These two phenomena can significantly prevent the successful performance of rock grouting in field-scale underground spaces, especially at deep depth conditions. Our research can provide a foundation for improving and optimizing the innovative techniques of rock grouting.

• 복식
• /
• 제60권8호
• /
• pp.29-37
• /
• 2010

Contemporary fashion emphasizes artistic, decorative aspects beside functional, practical targets, and pursues various materials. Also, rising of the design-based tendency, using the various tonality, texture and unveiling the new processing method, decorating technology and a new-material have made the ornaments as one of the figure that expose aesthets and individuality of designers and owner. With its unique expression and artistic beauty the design of ornament pervaded their field to figurative arts. This study aimed at the weaving technique using a hooked needle which is a crochet, and the making manufactured skirts item, moreover the study focused on putting the skirts item into the ornaments of the crochet. The skirt, which was thought to belong to women only, made easy and economic goods. Consumer also wanted to feel free and comfortable as manufactured items did, and it added individuality and practical use. This research tried to develop the design of crochet items to supplement the higher value-added, after examining the theoretical background of crochet, and analyzing crochet trend from 2005-06 F/W to 2010 S/S. As the result, it could be seen that the crochet may offer contemporary ornament art expressing formativeness of handcraft and fineness to the era of replica and manufactured goods.

• 보존과학회지
• /
• 제35권4호
• /
• pp.363-372
• /
• 2019

Animal glue has been used as a binder in Dancheong since the Joseon dynasty. Binders play an important role in determining the physical characteristics of a painting layer. The analysis of binders can be used to identify the materials and techniques used in traditional Dancheong. Binders can be investigated using physicochemical component analyses methods such as gas chromatography/mass spectrometry, pyrolysis-gas chromatography/mass spectrometry, and fourier transform infrared spectroscopy, but the detection characteristics vary depending on the degradation properties of the pigment and binder. Therefore, cross-validation using a combination of physicochemical analysis and enzyme immunoassay is used to increase the reliability of the results. In this study, we present an enzyme-linked immunosorbent assay (ELISA) as an example of an enzyme immunoassay as a method for analyzing animal glue, a traditional binder used in Korea. The applicability of ELISA was tested using commercial animal glue, in addition to animal glue produced using a variety of extraction conditions. The animal glue was analyzed in a Noerok-additionally coated-replica sample to evaluate the possibility of analyzing the animal glue in a paint layer mixed with pigment. Based on the results, we performed an assay on the use of animal glue in the Dancheong sample of the temples of the Joseon dynasty, that are estimated to have been built in the 17^th century.

• 한국세라믹학회지
• /
• 제18권1호
• /
• pp.27-34
• /
• 1981

The phase separation of low-alkali borosilicate glass with the composition of $6.25Na_2O$.$18.75B_2O_3$.$75.00SiO_2$(mole%) substituting $Li_2O$ for $Na_2O$ was studied. The phase separation in the temperature range of transformation was examined with various heating temperatures and soaking times. Durability to water, thermal expansion and specific density of the specimen were investigated and the microstructure of the separated phase was also observed by transmission electron micrograph techniques. The maximum alkali extraction result with the best phase separation effect was obtained when $Na_2O$ of the base glass was replaced with $1.88Li_2O$ (mole %) and electron micrograph of carbon film replica of $1.88Li_2O$$4.37Na_2O$.$18.75B_2O_3$.$75.00SiO_2$ (mole %) glass showed that the glass consisted of homogeneous two phases. The minimum specific density was shown with the specimen treated at 57$0^{\circ}C$ and it was also shown that the longer the treating time the lower the specific density. The apparent activation energies of approximately 45 kcal/mole by the alkali extraction and 43kcal/mole by the thermal expansion method were derived from the Arrhenius plots, respectively.

• 대한치과의사협회지
• /
• 제56권7호
• /
• pp.366-374
• /
• 2018

Purpose : The purpose of this study was to compare the marginal fit of monolithic zirconia restorations fabricated form the conventional and the digital impression technique. Materials and methods : Ten patients were restored with monolithic zirconia restorations fabricated from the digital and the conventional impression technique. Before definitive insertion, silicone replicas were produced from all twenty crowns. The silicone replicas were cut in three sections; each section was evaluated at two points. The measurement was carried out by using a measuring microscope (Olympus BX 51) and I-Solution. Data from the silicone replica scores were analyzed by Shapiro-Wilk test for normal distribution and the t-test for equality of two population's mean. All tests were performed with ${\alpha}-level$ of 0.05. Results : The average marginal gaps of monolithic zirconia restorations were $133.81{\pm}36.46{\mu}m$ for the conventional impression technique, $90.07{\pm}9.47{\mu}m$ for the digital impression technique. No statistical differences were found between the two impression techniques Conclusion : Both prostheses presented clinically acceptable results with comparing the marginal fit.

• 대한화장품학회지
• /
• 제31권3호
• /
• pp.253-257
• /
• 2005

피부노화의 정도를 판정하기 위해 사용되는 주름측정법들은 객관성과 재현성의 확보가 중요한 요소이다. 최근의 경향은 주름의 형태나 깊이에 주는 영향을 최소화하기 위해 주름 측정시 피부에 직접 기계나 도구를 접촉하지 않고 측정하는 비접촉식 측정방법으로 빠르게 전환되고 있는 상황이다. 저자들은 주름측정 기술의 변천 과정을 간단히 살펴보고, 비접촉식 fringe projection 방식의 미세주름 측정기기인 PRIMOS를 중심으로 측정원리, 특징들을 접촉식 측정방법인 모사판을 이용한 방법과 비교하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 추계학술발표대회
• /
• pp.322-325
• /
• 2017

C와 C++는 컴파일된 결과물의 실행 속도가 타 프로그래밍 언어로 작성된 것보다 빠르고 기존의 시스템과 호환성이 좋다는 점 등의 장점을 갖고 있기 때문에 많은 프로그래머들로부터 여전히 사랑받는 프로그래밍 언어이다. 하지만 C와 C++로 생성된 프로그램은 버퍼 오버플로 취약점과 같은 다양한 메모리 커럽션 취약점을 갖고 있기 때문에 쉽게 외부의 공격자들에게 노출된다. 따라서 사용자가 이와 같은 언어로 생성된 프로그램을 안전하게 실행하기 위해서는 시스템에 신뢰할 수 있는 방어 기법이 미리 적용되어 있어야만 한다. 본 연구에서는 메모리 커럽션 취약점을 이용한 공격을 탐지하기 위한 기법 중 하나인 Multi-variant Execution Environment (MVEE)를 소개하고, MVEE의 핵심 요소 기술인 레플리카 생성 기법들에 대하여 설명하고 비교 분석하고자 한다.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.90-98
• /
• 1999

Boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants are degraded by creep damage due to severe operationg conditions like high temperature and high pressure for an extended period time. Such material degradation lead to various component faliures causing serious accidents at the plant. Conventional measurement techniques such as replica method, electric resistance method, and hardness test method have such disadvantages as complex preparation and measurement procedures, too many control parameters, and therefore, low practicality and they were applied only to component surfaces with good accessibility. In this study, both artificial creep degradation test using life prediction formula and frequency analysis by ultrasonic tests for their preparing creep degraded specimens have been carried out for the purpose of nondestructive evaluation for creep damage which can occur in high-temperature pipelline of fossil power plant. As a result of ultrasonic tests for crept specimens, we confirmed that the high frequency side spectra decrease and central frequency components shift to low frequency bans, and bandwiths decrease as increasing creep damage in backwall echoes.

• 한국해양공학회지
• /
• 제13권2호통권32호
• /
• pp.99-107
• /
• 1999

Boiler high-temperature pipelines such as main steam pipe, header and steam drum in fossil power plants are degraded by creep damage due to severe operationg conditions which are high temperature and high pressure for an extended period time. Such material degradation leads to various component failures causing serious accidents at the plants. Conventional measurement techniques such as replica method, electric resistance method, and hardness test method have such disadvantages as complex preparation and measurement procedures, too many control parameters, and therefore, low practicality and they were applied only to component surfaces with good accessibility. In this paper, artificial creep degradation test and ultrasonic measurement for their creep degraded specimens have been carried out for the purpose of evaluation for creep damage which can occur in high-temperature pipeline of fossil power plant. Absolute measuring method of quantitative ultrasonic measurement for material degradation was established, and long term creep degradationtests using life prediction formula were carried out. As a result of ultrasonic tests for crept specimens, we confirmed that the sound velocity decreased and the attenuation coefficient linearly increased in proportion to the increase of creep fractiin(${\phi}$c).