• The Korean Journal of Pesticide Science
• /
• v.12 no.2
• /
• pp.162-167
• /
• 2008

To enhance the control efficacy against cockroaches in dwelling space, repellent ("Push") was set down on one comer and a poison bait including attractant ("Pull") was on the opposite side. And we tested the control efficacy of Push-Pull strategy by behavior-stimuli of cockroaches. In a mini-field test, German cockroach males primarily chose shelters nearest to the attractant-treated surfaces and farthest from the repellent-treated surfaces. The consumption of food or bait was also highest from food nearest to the preferred shelters by push-pull effect. We evaluated the push-pull insecticidal efficacies of five essential oils belong to Citrus plant, namely, grapefruit, lemon, lime, orange, and petitgrain. The combined push-pull treatments appeared to be faster and higher insecticidal effects than single (pull) treatment, and the repellent efficacy of Citrus oils was in the order of grapefruit > lemon > lime > orange > petitgrain. Therefore, we propose the effective control of the german cockroach using Citrus oils as repellents and push-pull method into a limited area.

• Korean Chemical Engineering Research
• /
• v.57 no.2
• /
• pp.177-184
• /
• 2019

Non-fluorinated water repellent coating solutions were obtained using methyltrimethoxysilane (MTMS) and trimethylethoxysilane (TMES) as precursors. The solutions were spin-coated on a cold-rolled steel sheet and cured thermally to prepare water repellent coating films. During this process, the effect of molar ratio of TMES/MTMS was studied for the hydrophobic properties of the coating films. Hydrophobic properties of coating films were characterized using contact angle measurement, surface morphology analysis and infrared spectroscopy. When the molar ratio of TMES/MTMS was varied from 0 to 30, the contact angle of the un-coated cold-rolled steel sheet was $30^{\circ}$, whereas when the molar ratio of TMES/MTMS was 1, the contact angle increased to $104^{\circ}$ and water repellency was significantly improved. In the case of TMES/MTMS molar ratios of 10, 15, 25 and 30, the contact angles of coating films showed $109^{\circ}$, $114^{\circ}$, $117^{\circ}$ and $144^{\circ}$, respectively. At this time, the hydrophobicity of the coating films was improved by the increase of the surface roughness and the content of the methyl component at the coating surface. In particular, when the molar ratio of TMES/MTMS was 30, the overall surface roughness was greatly increased due to the presence of surface particles as well as the water repellency due to methyl groups of TMES, resulting in super hydrophobicity of $144^{\circ}$.

• The Korean Journal of Pesticide Science
• /
• v.14 no.4
• /
• pp.433-439
• /
• 2010

This study was performed to investigate repellent effect of plant essential oils against Bemisia tabaci adult. Among the 20 tested oils, wild mint oil repelled B. tabaci adult significantly (>90%) at a dose of $5{\mu}{\ell}$, but the other oils did not. In dose responses (2, 1, 0.5, $0.1{\mu}{\ell}$) to B. tabaci adult, wild mint oil showed repellent response (77.8~65.7%) significantly with dose-dependent manner. Wild mint oil analyzed by GC/MS revealed that the major components of wild mint oil were menthol (56.5%), menthone (29.0%) and menthyl acetate (14.5%), and the active components responsible for the effective repellency proved to be menthol (77.8%) and menthone (75.8%) when treated the proportion found in original oil. However, menthyl acetate did not show significant repellency. Combined constituents of wild mint oil were showed synergistic effect.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.181-188
• /
• 2013

This paper is to investigate experimentally an effect of carbon amino silica black-superplasticizer(CASB-SP)on the engineering properties and chromaticity of black color concrete with 0.45 of W/C(water to cement). CASB-SP and carbon black were applied for pigment of the concrete. To prevent efflorescence of concrete, four different water repellent agents were also applied. As results, it was found that use of CASB-SP increased the slump and air contents. Furthermore, the use of CASB-SP increased the compressive strength. As CASB-SP dosages increased, chromaticity was well developed. For the effect of water repellent agent, the use of epoxy type was effective for protection from efflorescence. Based on test results, it was evaluated that 0.5% of CASB-SP effectively improve the concrete quality as well as enhance the chromaticity with proper dosage.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.2 s.120
• /
• pp.31-37
• /
• 2007

Lithography like off-set printing is processed using the repellent properties between water and oil, so all inks for off-printing must work with dampening solution(water). The dampening water may cause the emulsification of ink by the printing pressure in the printing nip. This study aimed to investigate the effect of emulsified inks on print mottle. The cyan ink was emulsified artificially with the different IPA(isopropyl alcohol) content in this study. We evaluated the print mottle by densitometer and image analysis method. The print mottle phenomenon was directly affected by IPA content. The emulsification of inks also had an influence on flow properties of inks and it increased ink transfer rate. It, however, caused low ink density. Moreover the emulsified inks were spreaded to around dots and cause the thinning density on the non-printing area like print mottle. The trial printing showed that the emulsified inks also cause scumming on the printing result with little mistake of adjusting dampening solution and mostly decreasing dot reproduction. We could, therefore, find out the obvious effect of emulsified inks on print mottle.

• Korean journal of applied entomology
• /
• v.62 no.2
• /
• pp.95-102
• /
• 2023

The number of households with pets has increased in recent years. Consequently, interest in mites and their odors has increased. In this study, we investigated whether pyrethrum extract and water-soluble phytoncides are effective tick repellents, deodorizing agents, and antibacterial agents. In the tick-climbing test, the pyrethrum extract (23.33 points) and water-soluble phytoncide (22.00 points) showed a high repelling effect. To confirm the tick avoidance effect of the composite extract, a tick climbing test was conducted with a pest control extract, a composite extract (referred to as a sample) containing a water-soluble phytoncide, and a third-party product (control). The sample showed a high avoidance effect (13.00 points and Control 26.67 points. An indoor repellent efficacy test for ticks confirmed that the sample showed an excellent tick-repellent effect (88%) compared to the control (12%). As a result of a deodorization test, ammonia was shown to have a deodorizing effect of 98.3% and trimethylamine of 99.5%, whereas, in the antibacterial test, the E. coli, Staphylococcus aureus, and pneumonia groups showed an antibacterial effect of 99.9%. Combining the results of this study, it is judged that the complex extract including the above material has high utility value as a material that is effective in mite repellents, deodorization, and antibacterial activity.

• Science of Emotion and Sensibility
• /
• v.15 no.2
• /
• pp.201-208
• /
• 2012

The objectives of this study were to investigate the psychoacoustic properties of PTFE(Poly tetra Fluoroethylene) laminated vapor permeable water repellent fabrics which are frequently used for sportswear, to examine the relationship among fabrics' basic characteristics, mechanical properties and the psychoacoustic properties, and finally to propose the predicting model to minimize the psychoacoustic fabric sound. A total of 8 specimens' frictional sound were recorded and Zwicker's psychoacoustic parameters such as loudness(Z), sharpness(Z), roughness(Z), and fluctuation strength(Z) were calculated using the Sound Quality Program. Mechanical properties of specimens were measured by KES-FB system. Loudness(Z) of specimen D-1 was the highest, which means the rustling sound of the specimen D-1 was the most noisy. Statistically significant difference among film type was observed only in loudness(Z) for fabric sound. Based on ANOVA and post-hoc test, specimens were classified into less loud PTFE film group (groupI) and loud PTFE film group (groupII). Loudness(Z) was higher when staple yarn was used compared when filament yarn was used. According to the correlation between the mechanical properties of fabrics and loudness(Z) in groupI, the shear properties, compression properties and weight showed positive correlation with loudness(Z). According to the regression equation predicting loudness(Z) of groupI, the layer variable was chosen. In groupII, variables explaining the loudness(Z) were yarn types and shear hysteresis(2HG5).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.4
• /
• pp.373-377
• /
• 1997

The bird repellent, methiocarb 50% WP, has been used to reduce the bird damage in the crop field in the European countries. The bird damage occaisonally would occur in the wet direct seeded rice and in soybean field, and resulted in decreasing the crop productivity by the reduction of seedling emergence rate. In this experiment, rice seeds, Hwasungbyeo(Oryza sativa), were coated with the different application rate of methiocarb, 5, 10 and 15 per kg seed, and soybean, Taegwangkong(Glycine max), 2.5, 5.0 and 7.5g. In rice, the seeds coated with 10 and 15g of methiocarb were not lost by bird, while those with 5g and control were lost to 37 and 50% of total seeds, respectively. No damage by birds was observed in rice seedling when the coleoptile and radicle of rice were emerged at 7 days after the water seeding. The crop injury of methiocarb reducing the emergence rate of seedlings, shortening the shoot length, and decreasing the leaf number was occurred at the treated of methiocarb 15g per kg seed. In soybean, the loss of the sprouting by birds was lower in the treatment of methiocarb 7.5g per kg seed than that in both the control and the treatments of methiocarb, 2.5 and 5.0g per kg seed. No crop injury by the treatment of methiocarb was observed in all application rate.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2004.04a
• /
• pp.192-210
• /
• 2004

Application methods of chemicals were investigated tn minimize strength reduction of corrugated boards under the high humidity environment encountered in the cold chain system. Starch insolubilizers were introduced in the starch solution preparation of the Stain hall method and their insolubilization effect of starch binder were estimated. The performance of water repellent agents(WRA) and moisture proof agents(MPA) were evaluated in terms of water and moisture resistance. And effects of the combination of the chemicals and the coating method were also examined. Addition of the polyamine polyamide insolubilizer to the main part in the Stain hall process improved the binding force and water resistance of starch, which contributed to minimize the strength reduction of paper under the high humidity environment. AZC and Glyoxal type insolubilizers could not be used in the experiment due to an excessively increased viscosity of starch solution and the poor stability. Conventional WRA treatment to the base paper enhanced water and moisture resistance very slightly even though water repellency of the paper reached R10 by the treatment. MPA showed excellent performance than WRA not only in water and moisture resistance but in water repellency. Double coating on paper with MPA was more effective than the single coating at the same coating weight. A newly developed MPA showed excellent performance and runnability only by a single coating instead of a double coating.

• Journal of the Korean Wood Science and Technology
• /
• v.22 no.1
• /
• pp.20-27
• /
• 1994

Water repellent preservative (WRP) treated and untreated, small-sized specimens prepared from semiwater resistant, water resistant, and tegofilm-overlaid plywood were exposed to outdoor weathering for one year. Exterior durability of specimens was evaluated on the basis of changes in dynamic modulus of elasticity, degree of delamination, modulus of elasticity, modulus of rupture, and glueline shear strength. Among untreated specimens, tegofilm-overlaid plywood showed the best outdoor durability, and durability between semiwater resistant and water resistant plywood was similar. Although WRP treatment increased the durability of all types of plywoods, the effect of treatment on the increase in durability for semi water resistant plywood was not distinct. Accordingly, it can be concluded that semi water resistant plywood, which is used for temporary construction such as concrete formwork in our country, can not be inadequate for exterior use, regardless of WRP treatment. The bending strength and glueline shear strength of untreated water resistant plywood measured after weathering for one year did not exceed the minimum value specified by Korean Standard (KS), thereby the outdoor use of water resistant plywood was not desirable without WRP treatment. Exterior durability between treated water resistant plywood and untreated tegofilm-overlaid plywood was very similar. This result suggests that if an exposed plywood surface is treated with WRP regularly water resistant plywood can be used for temporary construction. This suggestion, however, needs to be investigated. In summary, semiwater resistant plywood cannot be used for temporay construction regardless of WRP treatment. Water resistant plywood can be used only with WRP treatment. Comparing the cost of tegofilm-overlaid plywood to costs of water resistant plywood and WRP treatment, however, it can be concluded that use of tegofilm-overlaid plywood for temporay constrution is strongly suggested from the point of view of both outdoor durability and costs.