• Steel and Composite Structures
• /
• 제18권4호
• /
• pp.925-946
• /
• 2015

This paper presents a new cost-effective hybrid GFRP-Concrete deck system that the GFRP panel serves as both tensile reinforcement and stay-in-place form. In order to understand the fatigue behavior of such hybrid deck, fatigue test on a full-scale specimen under sagging moment was conducted, and a series of static tests were also carried out after certain repeated loading cycles. The fatigue test results indicated that such hybrid deck has a good fatigue performance even after 3.1 million repeated loading cycles. A three-dimensional finite element model of the hybrid deck was established based on experimental work. The results from finite element analyses are in good agreement with those from the tests. In addition, flexural fatigue analysis considering the reduction in flexural stiffness and modulus under cyclic loading was carried out. The predicted flexural strength agreed well with the analytical strength from finite element simulation, and the calculated fatigue failure cycle was consistent with the result based on related S-N curve and finite element analyses. However, the flexural fatigue analytical results tended to be conservative compared to the tested results in safety side. The presented overall investigation may provide reference for the design and construction of such hybrid deck system.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2002년도 학술발표회 논문집
• /
• pp.149-156
• /
• 2002

• 한국지반공학회논문집
• /
• 제24권6호
• /
• pp.101-116
• /
• 2008

보강토 옹벽의 영구구조물로서의 적용성이 증가함에 따라 지속 혹은 반복하중 등 다양한 하중조건하에서 장기적인 잔류변형이 설계/시공시 주요 관점이 되고 있다. 본 연구에서는 교량구조물의 피어 및 Back-to-Back(BTB) 형태의 보강토 옹벽을 대상으로 사용하중 작용 이전에 작용시키는 선행하중이 보강토 구조물의 잔류변위를 제어에 미치는 영향을 고찰하였다. 이를 위해 모형 피어와 BTB 옹벽을 축조하여 단순재하, 지속하중, 반복하중 등 다양한 하중조건 및 시공조건에 대한 모형실험을 수행하였다. 그 결과 선행재하 공법은 다양한 하중 및 시공조건에서 잔류변위 제어에 탁월한 것으로 나타났다.

• 대한토목학회논문집
• /
• 제9권1호
• /
• pp.89-95
• /
• 1989

다져진 흙의 공시체에 최대 10만회 까지 반복하중(反復荷重)을 가하였을 때 잔류변형(殘溜變形) 및 탄성변형(彈性變形) 그리고 반복후(反復後) 일축압축시험을 행하여 응력(應力)-변형율(變形率) 관계등(關係等)을 검토하였으며, 여기에 영향을 미치는 함수비(含水比), 밀도(密度), 반복회수(反復回數), 반복하중등(反復荷重等)에 대해서 고찰(考察)하였다. 반복회수(反復回數)에 따른 변형(變形)의 증가율(增加率)은 소성한계(塑性限界)를 기준으로 함수비의 정도에 따라 크게 변화 하였으며, 반복하중(反復荷重)을 받은후(後) 구한 탄성변형계수(彈性變形係數)로부터 흙의 초기접선계수(初期接線係數)의 추정(推定)이 가능 하였다.

• 한국지반공학회논문집
• /
• 제23권6호
• /
• pp.5-21
• /
• 2007

보강토 옹벽은 기존 콘크리트 옹벽에 비하여 많은 장점을 지니고 있으나 장기적으로 지속하중 혹은 반복하중 등에 의한 잔류변형의 우려로 영구 구조물로서의 적극적인 적용에 장애가 되고 있다. 이 문제를 해결하기 위해서는 보강토 구조물의 시간 의존적 잔류변형 메카니즘의 규명과 아울러 잔류변형을 예측하고 제어하는 기술이 확보되어야 한다. 본 연구에서는 이러한 연구의 필요성에 근거하여 보강토 옹벽에 발생할 수 있는 장기변형 특성 고찰에 주안점을 두고 지오그리드와 표준사로 뒤채움된 모형 보강토 옹벽에 대한 지속하중 혹은 반복하중 등 다양한 하중이력에 대한 보강토 구조물의 장기변형 특성 메카니즘을 축소모형실험을 통해 고찰하였다. 그 결과 보강토 옹벽의 시간의존적 변형은 작용하는 하중특성 뿐만 아니라 뒤채움흙 및 보강재의 역학적 특성에도 많은 영향을 받는 것으로 나타났으며, 선행하중을 작용함으로써 시간 의존적 잔류변형을 제어할 수 있는 것으로 파악되었다.

• 대한토목학회논문집
• /
• 제30권5D호
• /
• pp.505-512
• /
• 2010

교통하중이 작용하는 기초지반의 성능 및 도로하부 지반에서의 변형예측을 위해서는 반복적인 교통하중하에서의 장기변형 예측이 필요하다. 그러나 도로와 철도와 같은 다층시스템에서의 장기변형을 예측하는 것은 쉽지 않은 일이다. 따라서 보다 정량적인 해석을 위해서는 적절한 해석방식, 재료모형, 그리고 재료의 상수들을 통한 역학-경험적인 방식이 필요하다. 따라서 본 연구에서는 반복 교통하중에 의한 응력의존적인 기초 지반재료의 장기변형 거동 파악을 위해 반복 하중의 응력수준과 함수비 조건이 고려된 반복재하 장기변형실험을 실시한 결과를 분석하고 해석에 활용하였다. 여러 응력상태조건에서 기초 지반재료의 장기변형 특성이 반영된 유한요소해석을 실시하였고 장기변형 예측모델의 실내시험규모에서의 적용성을 평가하였다.

• Structural Engineering and Mechanics
• /
• 제23권4호
• /
• pp.353-367
• /
• 2006

Two full-scale, precast, pretensioned box girders were subjected to shear-dominated loading, one under monotonic loads to failure and the other subjected to one-half million cycles of fatigue loads followed by monotonic ultimate loads. The number of cycles was selected to allow for comparison with previous research. The fatigue loads were applied in combination with occasional overloads. In the present study, fatigue loading reduced the shear capacity by only six percent compared to the capacity under monotonic loading. However, previous research on flexure-dominated girders subjected to the same number of repeated loads showed that fatigue loading changed the mode of failure from flexure to shear/flexure and the girder capacity dropped by 14 percent. The comparison of the measured data with calculated shear capacity from five different theoretical methods showed that the ACI code method, the compression field theory, and the modified compression field theory led to reasonable estimates of the shear strength. The truss model led to an overly conservative estimate of the capacity.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권6호
• /
• pp.367-370
• /
• 2002

Candida cylindracea lipase was immobilized by adsorption on acid washed glass beads. It was observed that protein loading of the support depends on the size of the particle, with smaller particle containing higher amount of protein per unit weight. Initial reaction rate linearly varied up to enzyme concentration of 17.25 U/mL. Amount of free fatty acids produced was linearly proportional up to the enzyme loading of 1650 $\mu$g/g of bead. Achievement of chemical equilibrium took longer time in the case of less protein loading. Degree of hydrolysis was found to decrease in second and third consecutive batch operations on repeated use of immobilized lipase.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권5호
• /
• pp.762-772
• /
• 2004

Fatigue life of a Piston for large liquid Petroleum liquid injection(LPLi) bus engines is analyzed considering effects of cooling condition parameters : temperature of cooling water, and heat transfer coefficients at oil gallery and bottom surface of piston head. Temperature of the piston is analyzed with varying cooling conditions Stresses of the piston from two load cases of pressure loading. and pressure and thermal loading are analyzed Fatigue life under repeated peak pressure and thermal cycle is analyzed by the strain-life theory. For the two load cases, required loading cycles for engine life are defined, and loading cycles to failure and partial damages are calculated. Based on the resulting accumulated fatigue usage factors, endurance of the piston is evaluated and effects of varying cooling condition Parameters are discussed.

• Geomechanics and Engineering
• /
• 제16권2호
• /
• pp.113-124
• /
• 2018

Under repeated loading, the residual stresses within the subgrade and subsoil can accelerate the deformation of the road structures. In this paper, a series of laboratory cyclic loading model tests and small-scale model tests were conducted to investigate the dynamic stress response within soils under different loading conditions. The experimental results showed that a dynamic stress accumulation effect occurred if the soil showed cumulative deformation: (1) the residual stress increased and accumulated with an increasing number of loading cycles, and (2) the residual stress was superimposed on the stress response of the subsequent loading cycles, inducing a greater peak stress response. There are two conditions that must be met for the dynamic stress accumulation effect to occur. A threshold state exists only if the external load exceeds the cyclic threshold stress. Then, the stress accumulation effect occurs. A higher loading frequency results in a higher rate of increase for the residual stress. In addition to the superposition of the increasing residual stress, soil densification might contribute to the increasing peak stress during cyclic loading. An increase in soil stiffness and a decrease in dissipative energy induce a greater stress transmission within the material.