• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.141-145
• /
• 2003

The FBG sensors are inserted on the liners of the filament wound pressure tanks. The strains near the welding region of the liners are monitored in the hydro-pressurizing tests. The hydro-pressurizing tests consist of the proof tests at 4500 or 3300 psi and repeated test at the operating pressure, 3000 psi. The FBG sensors work well under $3000\mu\varepsilon$, but the strains calculated from the reflected signals are instable at the high strain level. The transverse compression on the sensor head results in the split of the reflected peaks, and the calculating algorism from the split peaks is not robust under the various signal condition. The FBG sensors fracture near $7500\mu\varepsilon$ level and lose their function permanently.

• Computers and Concrete
• /
• 제15권1호
• /
• pp.73-88
• /
• 2015

Following previous studies, the current paper describes the results of an experimental program concerning the repair of reinforced concrete columns by thixotropic pseudo plastic mortar, preformed to analyze and quantify the influence of initial construction damage to the behavior of the repaired element. Five columns (section scale 1:2) were designed according to the minimum requirements of reinforcement of ductility orientated codes' design with variables the percentages of initial construction damages. All were tested in axial compression with repeated cycles up to failure. For comparison reasons, another one of the same characteristics, yet healthy, was constructed and tested as a reference specimen. A numerical study (Finite Element Analysis) was conducted for further investigation of the behavior of the thixotropic mortar as repair material. The results indicate that: a) surpassing a specific amount of damage, columns even suitably repaired present lower strain capacity, b) finite element analysis present the same way of deboning of the repaired material taking into consideration the buckling of the reinforcement bars.

• Structural Engineering and Mechanics
• /
• 제51권5호
• /
• pp.809-821
• /
• 2014

The truss based steel bridge structures usually consists of gusset plates which lose their load carrying capacity and rigidity under the effect of repeated and dynamics loads. This paper is focused on modeling the nonlinear material behavior of the gusset plates of the Truss Based Bridges subjected to dynamics loads. The nonlinear behavior of material is characterized by a damage coupled elsto-plastic material models. A truss bridge finite element model is established in Abaqus with the details of the gusset plates and their connections. The nonlinear finite element analyses are performed to calculate stress and strain states in the gusset plates under different loading conditions. The study indicates that damage initiation occurred in the plastic deformation localized region of the gusset plates where all, diagonal, horizontal and vertical, truss member met and are critical for shear type of failure due tension and compression interaction. These findings are agreed with the analytical and experimental results obtained for the stress distribution of this kind gusset plate.

• The Korean Journal of Pain
• /
• 제26권2호
• /
• pp.169-172
• /
• 2013

Eagle's syndrome is a disease without a clear lesion that is associated with repeated episodes of pharyngalgia, odynophagia, the sensation of a foreign body in the pharynx, tinnitus, and otalgia in which patients displaying these types of symptoms must be given a differential diagnosis. It is known to be characterized by styloid process elongation or increasing compression to adjacent anatomical structures through stylohyoid ligament calcification. In serious cases, continuous pressure to the carotid artery can lead to a stroke. Diagnosis is confirmed through clinical symptoms, radiological findings, and physical examinations. The most common type of treatment consists of a surgical excision of elongated styloid process. Nonetheless, this study presents a case of treating Eagle's syndrome with conservative management.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.298-299
• /
• 2005

Differently from the tensile, transverse compression and torsion cases, the bending test of HTS tapes requires a lot of time and efforts, since the sample should be mounted successively onto bent sample holders in the order of decreasing radius and measuring the $I_c$ at each step. The influence of repeated cooling and warming experienced during these processes on the $I_c$ degradation can not be ignored. As a result, in this study, particularly. a new one-body type sample holder which provides continuous bending strains at 77K was devised. And, $I_c$ degradation behavior of Bi-2223 tapes under easy bending condition was investigated and compared that with other cases using Goldacker-type bending tester or respective sample holder.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.57-64
• /
• 2013

PURPOSES : It is to evaluate lightweight soil as a subgrade material based on mechanical tests and calculation of pavement performance. METHODS : In this research, various contents of cement and air foam are used to make lightweight soil using wasted dredged soil. Uniaxial compressive strength test is conducted to evaluate strength of 7 and 28 day cured specimens. Secant modulus was calculated based on the stress and strain relationship of uniaxial compressive strength test. Resilient modulus test was measured using by repeated triaxial compression test. The measured resilient modulus was used in layered elastic program to predict fatigue and rutting life at a given pavement structure. RESULTS : Uniaxial compressive strength increases as cement content increases but decrease as air foam content increases. Resilient modulus also increases as cement content increases and decrease as air foam content decrease. CONCLUSIONS : It is concluded that dredge clay soil can be used as subgrade layer material using by lightweight treated soil method.

• 콘크리트학회논문집
• /
• 제18권1호
• /
• pp.47-56
• /
• 2006

본 연구에서는 두 종류의 전단지간 대 유효깊이의 비(a/d)를 가진 전단에 취약한 보 네 개에 대한 반복하중 실험을 수행하였다. 실험군에는 $6d_b$의 정착 길이의 $90^{\circ}$ 절곡된 갈고리를 가진 두 개의 스터럽을 묶은 하나의 다발 스터럽(bundled stirrups)을 배근하였으며 대조군에는 직경 50mm의 원형 헤드를 가진 헤디드 바를 배근하였다. 하나의 헤디드 바의 철근 직경은 하나의 다발 스터럽의 철근 직경과 같기 때문에 효과적인 실험 비교가 가능하였다. 실험 결과는 헤디드 바를 배근한 보가 일반 스터럽을 가진 보보다 연성, 에너지 흡수량, 최대하중 이후의 거동에 있어서 뛰어난 구조 성능을 보여 주었다. 반복하중에 의한 콘크리트 피복과 부분 압축파괴에 의해 스터럽의 갈고리는 바깥 방향으로의 변형과 함께 정착 성능을 상실하였다. 반면에, 헤디드 바는 헤드의 정착손실 방생 없이 변형률경화 시점을 지나서도 변형이 발생하였으며 압축 철근의 좌굴 발생을 지연하는 데에도 기여하는 것으로 나타났다. 반복하중에 의한 감소된 인장경화를 고려한 하중-변위 예측은 뛰어난 정확도를 보여 주었다.

• 한국음향학회지
• /
• 제31권7호
• /
• pp.427-434
• /
• 2012

WSOLA 방식은 음성 신호의 시간축 변환을 위한 고음질의 효율적인 알고리즘으로 알려져 있다. WSOLA의 계산량은 두 신호 파형 사이의 유사도를 평가하는 반복적인 정규상호상관도 계산에 집중되어 있다. 본 논문은 WSOLA 계산량 감축을 위해 고속의 정규상호상관도 계산 방법을 제안하며, 제안된 방법에서는 미리 계산된 합 테이블을 통해 인접한 구간에서의 반복적인 정규상호상관도 계산의 중복성을 제거한다. 정규상호상관도의 분모 부분은 시간축 변환 비율에 관계없이 높은 중복성을 가지는데 반해, 분자 부분은 보다 낮은 중복성을 가지며 중복 정도가 시간축 변환 비율과 최적 이동값에 의해 영향을 받기 때문에 고속 계산을 위해 보다 복잡한 알고리즘이 요구된다. 시뮬레이션 결과, 제안된 방법이 기존의 WSOLA와 완전히 동일한 음질을 유지하면서도 시간축 압축의 경우 약 40%, 그리고 1/2배속 및 1/3배속으로의 시간축 신장의 경우 각각 약 47% 및 52%의 실행시간을 감소시킴을 보인다.

• 한국지반공학회논문집
• /
• 제17권2호
• /
• pp.5-12
• /
• 2001

고유기질토의 정규압밀과 과입밀에 대한 압밀특성을 연구하기 위하여 전북지역에서 채취한 2종류의 고유기질토 IS와 YJ를 사용하여 일련의 실내 표준압밀시험과 반복압밀시험을 수행하였다. 전북지역 대표적인 고유기질토의 물리적 특성은 유기물함량이 각각 58%와 72%, 자연함수비 487%와 635%, 초기공극비 7.02와 9.72이었다. 표준압밀시험결과 K, $M_{v}$ , $C_{v}$ 는 압밀하중이 증가함에 따라서 선행하중을 경계로 일반 점토보다 크게 감소하는 특성을 보였다. 또한 2단계, 3단계 반복압밀 시험결과 K, $M_{v}$ 는 압밀하중이 증가함에 따라서 완만하게 감소하였으며 표준압밀시험결과보다는 작게 나타났다. 2단계 반복압밀의 경우 $C_{v}$ 는 정규압밀영역에서 표준압밀시험결과보다 약 10-12배정도 크게 나타났다. $C_{c}$ , $C_{a}$ 는 압밀하중이 증가함에 따라서 각각 선행하중의 약 2.5배, 3배 하중을 정점으로 크게 증감하는 고유기질토 고유의 특성을 나타냈다. 고유기질토의 $C_{c}$ , $C_{a}$ 는 일반 점토보다 압밀압력 의존성이 큰 특성을 나타냈으며 최대값도 각각 2.9-3.8, 0.3-0.4로 일반 점토보다 큰 값을 보였다. 2단계, 3단계 반복압밀시험결과 $C_{c}$ , $C_{a}$ 는 압밀하중이 증가함에 따라서 약간 증가하였다. $C_{a}$ 는 OCR이 증가함에 따라서 감소하였으며 특히 OCR이 1-2 범위에서 감소폭이 크게 나타났다. 고유길토의 제압밀계수는 반복회수 및 하중의 크기 등에 따라서 큰 영향을 받으며 또한 과압밀 크기의 대소는 고유기질토의 $C_{a}$ 에 큰 영향을 미치는 것으로 생각되어 이 분야에 대한 더 많은 연구가 필요하다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1268-1277
• /
• 2008

Recently, the high speed railway comes into the spotlight as the important and convenient traffic infrastructure. In Korea, Kyung-Bu high speed train service began in about 400km section at 2004, and the Ho-Nam high speed railway will be constructed by 2017. The high speed train will run with a design maximum speed of 300-350km/hr. Since the trains are operated at high speed, the differential settlement of subgrade under the rail is able to cause a fatal disaster. Therefore, the differential settlement of the embankment must be controlled with the greatest care. Furthermore, the characteristics and causes of settlements which occurred under construction and post-construction should be investigated. A considerable number of studies have been conducted on the settlement of the natural ground over the past several decades. But little attention has been given to the compression settlement of the embankment. The long-term settlement of compacted fills embankments is greatly influenced by the post-construction wetting. This is called 'hydro collapse' or 'wetting collapse'. This wetting collapse problem for the compressibility of compacted sands, gravels and rockfills, has been recognized by several researchers. For this wetting settlement problem, we showed the test results carried out with 4 fill materials. These tests were performed under the condition that the fill materials were inundated at the first wetting. Subsequently, in this study, we investigated the long-term settlement characteristics of the fill materials under the repeated partial wetting and rising of the ground water table happend by rainfall.