• Korean Journal of Heritage: History & Science
• /
• v.44 no.2
• /
• pp.76-95
• /
• 2011

After dismantled, Mireuksajiseoktap(Stone pagoda of Mireuksa Templesite) is being in the stage of restoration design. Now, different ways - producing restoration model, a 3 dimension simulation - have been requested to make more detailed and clearer restoration design prior to confirmation of its restoration design and actual restoration carry-out. This thesis proposes the way to build the detailed model for better restoration plan using extensively-used Reverse Engineering technique and Rapid Prototyping. It also introduces each stage such as a 3-dimension actual measurement, building database, a 3-dimension simulation etc., to build a desirable model. On the top of that, this thesis reveals that after dismantled, MIruksaji stone pagoda's interior and exterior were not constructed into pieces but wholeness, so that its looks can be grasped in more virtually and clearly. Secondly, this thesis makes a 3-dimension study on the 2-dimension design possible by acquiring basic materials about a 3-dimension design. Thirdly, the individual feature of each member like the change of member location can be comprehended, considering comparing analysis and joint condition of member. Lastly, in the structural perspective this thesis can be used as reference materials for structure reinforcement design by grasping destructed aspects of stone pagoda and weak points of the structure. In dismantlement-repair and restoration work of cultural properties that require delicate attention and exactness, there may be evitable errors on time and space in building reinforcement and restoration design based on a 2-dimension plan. Especially, the more complicate and bigger the subject is, the more difficult an analysis about the status quo and its delicate design are. A series of pre-review, based on the 3-dimension data according to actual measurement, can be one of the effective way to minimize the possibility that errors about time - space happen by building more delicate plan and resolving difficulties.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.3
• /
• pp.212-228
• /
• 2013

Stone cultural heritages are repaired by the use of metal stiffeners. The problem is that this type of repair has been based on the experience of workers without specific guidelines and has caused various problems. This is to suggest the structural reinforcement and behavioral characteristics of metal rods to minimize the secondary damage of materials and have the specimens tested and verified to establish the guidelines on how to insert metal stiffeners. When only epoxy resin is applied to the cut surface, only 70% of the properties of the parent material are regenerated and it is required to structurally reinforce the metal stiffener for the remaining 30%. The metal rod is under the structural behavior after the brittle failure of stone material and the structural behavior does not occur when the metal stiffener is below 0.251%. When it accounts for over 0.5%, it achieves structural reinforcement, but causes secondary damage of parent materials. The appropriate ratio of metal stiffener for the stone material with the strength of $1,500kgf/cm^2$, therefore, should be between 0.283% and 0.377% of the cross section of attached surface to achieve reversible fracture and ductility behavior. In addition, it is more effective to position the stiffeners at close intervals to achieve the peak stress of metal rod against bending load and inserting the stiffener into the upper secions is not structurally supportive, but would rather cause damage of the parent material. Thus, most stiffeners should be inserted into the lower part and some into the central part to work as a stable tensile material under the load stress. The dispersion effect of metal rods was influenced by the area of reinforcing rods and unrelated to their diameter. However, it ensures stability under the load stress to increase the number of stiffeners considering the cross section adhered when working on large-scale structures. The development length is engineered based upon the diameter of stiffener using the following formula: $l_d=\frac{a_tf_y}{u{\Sigma}_0}$. Also, helically-threaded reinforcing rods should be used to perform the behaviors as a structural material.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.243-263
• /
• 2022

The royal court of Joseon had a tradition of mounting the Irworobongdo, a painting of the sun, the moon and the five sacred peaks, symbols of the king's immortal presence and authority, on a folding screen and placing it in special spaces within the palace that were reserved for the king. While the Irworobongdo is generally accepted as the important ceremonial object of the royal palaces of Joseon, there have been few studies on the various folding screens used in the royal palaces, largely because the official records about such screens do not match the remaining original relics. In this study, the main discussion is focused on the diversity of the shapes and mounting materials of the Irworobongdoused for various ceremonies held in the royal palaces of Joseon based on the Uigwe, the official records of the royal protocols of the Joseon dynasty. The discussion also extends to the theme rarely studied so far, namely the original form of the Irworobongdo and its evolution in the following period. The ceremonial "five peak" folding screens (Obongbyeong) used at a number of important palace buildings, including the crown hall (Jeongjeon), royal funerary hall (Binjeon), spirit hall (Honjeon) and portrait shrine (Jinjeon), differed in shape and size from the folding screens used in royal celebratory events such as banquets, although the paintings themselves and the style of mounting them were essentially the same. The paintings were mounted on screens bordered with green silk and ornamented with floral gilt designs. The folding screens used in royal ceremonies were produced according to strict guidelines that required the ceremonies and mounting materials to be graded on the basis of the status of each screen. It was not until the 1960s that these ceremonial folding screens of the Joseon dynasty, which had been neglected during the period of Japanese colonial rule of Korea, began to undergo conservation treatment provided as part of a heritage preservation program. Unfortunately, many of the screens repaired in this period lost some of their original features - largely due to the use of non-traditional mounting techniques. Considering, however, that significant achievements have since been made in the heritage preservation field based on the use of historical evidence, it is now necessary to systematically use the repair history of the information about the remaining royal ceremonial folding screens to ensure that they are preserved and managed more effectively in the future.

• Journal of Chest Surgery
• /
• v.31 no.10
• /
• pp.939-944
• /
• 1998

Background: The sugical results of the Cox-Maze procedure (CMP) for lone atrial fibrillation(AF) have proven to be exellent. However, those for AF associated with mitral valve(MV) disease have been reported to be a little inferior. Materials and methods: To assess the efficacy and safety of the CMP as a combined procedure with MV operation, we studied retrospectively our experiences. Between April 1994 and October 1997, we experienced 70 (23 males, 47 females) cases of CMP concomitantly with MV operation. Results: The etiologies of MV disease were rheumatic in 67 and degenerative in 3 cases. The mean duration of AF before sugery was 66$\pm$70 months. Fifteen patients had the past medical history of thromboembolic complications, and left atrial thrombi were identified at operation in 24 patients. Twelve cases were reoperations. Aortic cross clamp (ACC) time was mean 151$\pm$44 minutes, and cardiopulmonary bypass (CPB) time was mean 246$\pm$65 minutes. Concomitant procedures were mitral valve replacement (MVR) in 19, MVR and aortic valve replacement (AVR) in 14, MVR and tricupid annuloplasty (TAP) in 8, MVR with AV repair in 3, MV repair in 11, MVR and coronary artery bypass grafting (CABG) in 2, MVR and AVR and CABG in 1, redo-MVR in 10, redo-MVR and redo-AVR in 2 patients. The rate of hospital mortality was 1.4%(1/70). Perioperative recurrence of AF was seen in 44(62.9%), and atrial tachyarrhythmias in 10(14.3%), low cardiac output syndrome in 4(5.7%), postoperative bleeding that required mediastinal exploration in 4(5.7%) patients. Other complications were acute renal failure in 2, aggravation of preoperative hemiplegia in 1, and transient delirium in 1 patient. We followed up all the survivors for 16.4 months(3-44months) on an average. Sinus rhythm has been restored in 65(94.2%) patients. AF has been controlled by operation alone in 73.9% and operation plus medication in 20.3%. Two patients needed permanent pacemaker implantation; one with sick sinus syndrome, and the other with tachycardia- bradycardia syndrome. Only two patients remained in AF. We followed up our patients with transthoracic echocardiography to assess the atrial contractilities and other cardiac functions. Right atrial contractility could be demonstrated in 92% and left atrial contractility in 53%.We compared our non-redo cases with redo cases. Although the duration of AF was significantly longer in redo cases, there was no differences in ACC time, CPB time, postoperative bleeding amount and sinus conversion rate. Conclusions: In conclusion, the CMP concomitant with MV operation demonstrated a high sinus conversion rate under the acceptable operative risk even in case of reoperation.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.455-486
• /
• 2015

The 3D printing technology, which started from the patent registration in 1986, was a technology that did not attract attention other than from some companies, due to the lack of awareness at the time. However, today, as expiring patents are appearing after the passage of 20 years, the price of 3D printers have decreased to the level of allowing purchase by individuals and the technology is attracting attention from industries, in addition to the general public, such as by naturally accepting 3D and to share 3D data, based on the generalization of online information exchange and improvement of computer performance. The production capability of 3D printers, which is based on digital data enabling digital transmission and revision and supplementation or production manufacturing not requiring molding, may provide a groundbreaking change to the process of manufacturing, and may attain the same effect in the character merchandise sector. Using a 3D printer is becoming a necessity in various figure merchandise productions which are in the forefront of the kidult culture that is recently gaining attention, and when predicting the demand by the industrial sites related to such character merchandise and when considering the more inexpensive price due to the expiration of patents and sharing of technology, expanding opportunities and sectors of employment and cultivating manpower that are able to engage in further creative work seems as a must, by introducing education courses cultivating manpower that can utilize 3D printers at the education field. However, there are limits in the information that can be obtained when seeking to introduce 3D printers in school education. Because the press or information media only mentions general information, such as the growth of the industrial size or prosperous future value of 3D printers, the research level of the academic world also remains at the level of organizing contents in an introductory level, such as by analyzing data on industrial size, analyzing the applicable scope in the industry, or introducing the printing technology. Such lack of information gives rise to problems at the education site. There would be no choice but to incur temporal and opportunity expenses, since the technology would only be able to be used after going through trials and errors, by first introducing the technology without examining the actual information, such as through comparing the strengths and weaknesses. In particular, if an expensive equipment introduced does not suit the features of school education, the loss costs would be significant. This research targeted general users without a technology-related basis, instead of specialists. By comparing the strengths and weaknesses and analyzing the problems and matters requiring notice upon use, pursuant to the representative technologies, instead of merely introducing the 3D printer technology as had been done previously, this research sought to explain the types of features that a 3D printer should have, in particular, when required in education relating to the development of figure merchandise as an optional cultural contents at cartoon-related departments, and sought to provide information that can be of practical help when seeking to provide education using 3D printers in the future. In the main body, the technologies were explained by making a classification based on a new perspective, such as the buttress method, types of materials, two-dimensional printing method, and three-dimensional printing method. The reason for selecting such different classification method was to easily allow mutual comparison of the practical problems upon use. In conclusion, the most suitable 3D printer was selected as the printer in the FDM method, which is comparatively cheap and requires low repair and maintenance cost and low materials expenses, although rather insufficient in the quality of outputs, and a recommendation was made, in addition, to select an entity that is supportive in providing technical support.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.1
• /
• pp.77-82
• /
• 2006

Purpose: The purpose of this study was to analyze the clinical results of symptomatic lateral discoid meniscus found in adults over 40 years old. Materials & Methods: From March 1994 to March 2004, 53 cases treated for lateral discoid meniscus in 48 patients aged over 40 years with the mean age $48.4(40{\sim}62)$ who were followed up more than 1 year, were analyzed by physical findings, simple X-ray, MRI and arthroscopic exam. Results: Most of the cases (42 cases, 79.2%) had symptoms for less than 1 year duration. 26 cases(49.1 %) out of 53 had trauma history. Simple radiologic evaluation showed that lateral condylar abnormality such as the flattening of lateral femoral condyle, marginal osteophytes, and subchondral sclerosis was seen in 37cases(69.8%). Also medial condyle showed degenerative changes in 16 cases (30.2%). Tear of discoid meniscus in 45 cases(84.9%) were examined by arthroscope and tear was not detected in 8 cases(15.1%). Type of tear was complex(18 cases), longitudinal(12 cases), horizontal(11 cases) and transverse(4 cases). Concomitant medial meniscal rupture was found in 7 cases(13.2%). The simple procedure done was reshaping(46 cases), subtotal resection(5 cases), total resection(1 case) and meniscal repair after reshaping in 6 cases, and arthroplasty was performed after arthroscopic examination in 1 case. Conclusion: Onset of symptom in adult lateral discoid meniscus is usually traumatic in origin. Most cases showed radiologic abnormality such as degenerative change in lateral condyles as well as medial condyles and the results of preservative surgical treatment was the most preferred option in most patients.

• Journal of Acupuncture Research
• /
• v.26 no.2
• /
• pp.159-170
• /
• 2009

Backgrounds and Objectives: A fracture means a loss of continuity in the substance of bone. Bone differs from other musculoskeletal tissue due to its ability to repair and heal itself without leaving a scar. The cutter head has multinucleated osteoclast cells to resorb the dead bone. The tail, with its conical surface, is lined with osteoblast cells laying down new bone. The conjugation of fracture is a unique biological process regulated by a complex array of signaling molecules and proinflammatory cytokines. Pyritum, one of the important prescriptions in the oriental medicine, has been used for conjugation fracture. The purpose of this study is to evaluate the effects of administration of Pyritum on activation of osteoblast cells in human body & on tibia bone fracture in mice. Materials and Methods : Four weeks aged 30 female DBA mice were used for this study. They were divided three groups, normal group, control group(fracture elicitate mice: FE group) and experimental group(Pyritum administered mice group after fracture elicitation : PA group). Left tibia bones of mice in FE and PA groups were fractured by bone cutters. MG-63 cells in human body th Pyritum in the ratio of 1 mg/m${\ell}$, and the cells were further incubated for 24 hours. Activation of osteoblast was identified using osteopontin, FGF in vitro test. In vivo test, regeneration of fractured tibia through the morphological changes was observed, and also activation of inflammation through NF-${\kappa}$B p65, iNOS, COX-2, osteoblast through osteopontin, FGF and osteoblast's proliferation in each group was measured. Results and Conclusions : 1. In vitro test for activation of osteoblast cells in human body by Pyritum, osteopontin and FGF production were remarkably increased in Pyritum treated MG-63 cells. 2. In regeneration of fractured tibia by Pyritum, fractured area in external tibia morphology was decreased more in the PA group than that of the FE group. Osteogenesis in fractured area was increased more in the PA group than that of the FE group. Also, endochodrial ossification in central area of fracture and osteoid in lateral area of fracture were increased more in the PA group than those of the FE group. 3. In activation of inflammation by Pyritum administered, activation of NF-${\kappa}$B p65, increase of iNOS and COX-2 production were higher in the PA and the FE groups than those of the control group. Especially, the PA group showed higher activation and increase than those of the FE group. 4. In activation of osteoblast by Pyritum, increase of osteopontin, FGF and osteoblast's proliferation were higher in the PA and the FE groups than those of the control group. Especially, the PA group showed higher increase and proliferation than those of the FE group.

• Progress in Medical Physics
• /
• v.11 no.2
• /
• pp.157-165
• /
• 2000

Purpose: For estimation of yields of l)NA damages induced by radiation and enhanced by oxygen, a mathematical model was used and tested. Materials and Methods: Reactions of the products of water radiolysis were modeled as an ordinary time dependant equations. These reactions include formation of radicals, DNA damage, damage repair, restitution, and damage fixation by oxygen and H-radical. Several rate constants were obtained from literature while others were calculated by fitting an experimental data. Sensitivity studies were performed changing the chemical rate constant at a constant oxygen number density and varying the oxygen concentration. The effects of oxygen concentration as well as the damage fixation mechanism by oxygen were investigated. Oxygen enhancement ratio(OER) was calculated to compare the simulated data with experimental data. Results: Sensitivity studies with oxygen showed that DNA survival was a function of both oxygen concentration and the magnitude of chemical rate constants. There were no change in survival fraction as a function of dose while the oxygen concentration change from 0 to 1.0 x 10$^{7}$ . When the oxygen concentration change from 1.0 $\times$ 107 to 1.0 $\times$ 101o, there was significant decrease in cell survival. The OER values obtained from the simulation study were 2.32 at 10% cell survival level and 1.9 at 45% cell survival level. Conclusion: Sensitivity studies with oxygen demonstrated that the experimental data were reproduced with the effects being enhanced for the cases where the oxygen rate constants are largest and the oxygen concentration is increased. OER values obtained from the simulation study showed good agreement for a low level of cell survival. This indicated that the use of the semi-empirical model could predict the effect of oxygen in cell killing.

• Journal of Chest Surgery
• /
• v.35 no.12
• /
• pp.854-861
• /
• 2002

In this study, we reviewed our early and long-term surgical results of complete atrioventricular septal defect during the last 16 years at our hospital. Materials and Methods: Between April 1986 and March 2002, 73 patients with complete atrioventricular septal defect underwent total correction without preceding palliation. Age at repair ranged from 2 to 85 (median age, 7) months, and weight ranged from 3 to 22 (median weight, 5.9)kg. Follow-up was complete with a mean duration of 69$\pm$51 months. Results: Overall operative mortality was 16.4%(12) with 3 late deaths. One, 5, and 10 year actuarial survival rates were 96.3 %, 94.2 % and 94.2 % respectively Sixteen of 61 (22.2%) operative survivors have undergone reoperation for postoperative mitral regurgitation or left ventricular outflow tract obstruction (LVOTO). Freedom from mitral reoperation at 1, 5, and 10 years were 87.8 %, 72.4 %, and 57.8 % and freedom from LVOTO at 1, 5, and 10 years were 98.2 %, 86.3 %, and 83.2 % respectively. Summary: In this study, we found that our early surgical results improved with quite an acceptable long-term outcome. Close observation of remaining mitral regurgitation was necessary, A precise evaluation of the atrioventricular valve morphology, a meticulous surgical technique, and the adequate postoperative management are mandatory for the excellent results.