• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.1-6
• /
• 2016

Seawater desalination plants generally have two inherent problems which stem from energy inefficiency and desalination concentrate management. The former has been somewhat resolved thanks to the innovative methods in utilizing new and renewable energy resources whereas the latter still has much issues to be dealt with. This paper introduces the application of a desalting process for the disposal of desalination concentrate (especially, Mg) and to improve its cost effectiveness of a MVR seawater desalination plant built in Jeju. Principal component analysis on the desalination concentrate has revealed a steady reduction of Mg with the application of the desalting process verifying its functional reliability. Also, it was found that our MVR seawater desalination plant is not only energy efficient but also could be effectively applied for the dual purpose of fresh water production and concentrate management.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.498-504
• /
• 2011

The purpose of this study was to investigate and develop an eco-frendly wood adhesive based on vegetable oil (especially soybean oil), the renewable and sustainable natural resources, using ozonification technology for the chemical structure modification. The waste soybean oil (WSBO) was reacted with $O_3$ at the rate of $450m{\ell}$(acetone) : $50m{\ell}$ (WSBO) for different times, 1, 2, 3 hrs. The investigation of the modified chemical strecture of the ozonied WSBOs were conducted using FT-IR. As ozonification time increased, the peak of the unsaturated double bonds was disappeared especially ozonized-3hrs and aldehyde or carboxyl peak appeared because ozonification broke the oil into small molecules. The plywood were made at $150^{\circ}C$ with 4 minutes hot-press time using the different ozonized 3 hrs WSBO/pMDI adhesives and were tested for the dry, wet, cyclic boil test according to the Korea Industrial Standard F3101 Ordinary plywood. The bond strengths gradually increased until 1 : 0.5~1 : 3, but it decreased 1 : 4, as the contents of pMDI increased. The results of the dry, wet and cyclic bond strengths the equivalent ratio was formed approximately between 1 : 2~1 : 3. And the 1 : 1~1 : 4 strengths met constantly the standard requirement of 7.0kgf/$cm^2$ (KS F3101). From the comprehensive view on the results of above experiment, it could be confirmed that ozonized WSBO/pMDI has characteristics of effective reactivity and wet stability showed as an excellent candidate of wood adhesive applications.

• Journal of the Korean Data and Information Science Society
• /
• v.24 no.3
• /
• pp.585-592
• /
• 2013

As the needs for alternative energy and renewable energy increase, there has been a lot of investment in developing wind energy, which does not cause air pollution nor the greenhouse gas effect. Wind energy is an environment friendly energy that is unlimited in its resources and is possible to be produced wherever the wind blows. However, since wind energy heavily relies on wind that has unreliable characteristics, it may be difficult to have efficient energy transmissions. For this reason, an important factor in wind energy forecasting is the estimation of available wind power. In this study, Gunsan wind farm data was used to compare ARMA model to neural network model to analyze for more accurate prediction of wind power generation. As a result, the neural network model was better than the ARMA model in the accuracy of the wind power predictions.

• Journal of Hydrogen and New Energy
• /
• v.25 no.2
• /
• pp.161-172
• /
• 2014

Hydrogen, which can be produced from abundant and widely distributed renewable energy resources, seems to be a promising candidate for solving the concerns for improving energy security, urban air pollution, and reducing greenhouse gas emissions. The two primary motivating factors for hydrogen economy are fossil fuel supply limitations and concerns about global warming. But the safety issues associated with hydrogen economy need to be investigated and fully understood before being considered as a future energy source. Limited operating experience with hydrogen energy systems in consumer environments is recognised as a significant barrier to the implementation of hydrogen economy. To prevent unnecessary restrictions on emerging codes, standards and local regulations, safety policies based on real hazards should be developed. This article studies briefly the direct impact-distances from hazard events such as hydrogen release and jet fire, and damage levels from hydrogen gas explosion in a confined space. Based on the direct impact-distances indicated in the accident scenarios and consumer environments in Korea, the safety policies, which are related to hydrogen filling station, hydrogen fuel cell car, portable fuel cell, domestic fuel cells, and hydrogen town, are suggested to implement hydrogen economy. To apply the safety policies and overcome the disadvantages of prescriptive risk management, which is setting guidance in great detail to management well known risk but is not covering unidentified risk, hybrid risk management model is also proposed.

• Journal of Wetlands Research
• /
• v.19 no.2
• /
• pp.240-245
• /
• 2017

In this study, we developed a method to assess quantitatively the amount and the economic value of water quality regulating service of ecosystem services. Numbers of species and aquatic organisms such as fish increased because of the improved water, but it was due to complex factors such as water quality regulation services of ecosystems, installation of environmental facilities for water quality treatment, and water quality regulation. Therefore we sought ways to quantitatively estimate the value of ecosystem regulation services. In this study, we propose a method to estimate the quantitative value of water quality regulation service of ecosystem by utilizing the total amount of water pollution. In addition, the economic value evaluation method was proposed by multiplying the estimated the quantitative value of water quality regulation service of ecosystem by the unit cost per unit capacity. Finally, the ecosystem water quality regulation service was estimated by using the evaluation method for BOD and T-P in Nakdong river watershed.

• Journal of ILASS-Korea
• /
• v.19 no.3
• /
• pp.115-122
• /
• 2014

As a demand for an automobile increases, air pollution and a problem of the energy resources come to the fore in the world. Consequently, governments of every country established ordinances for green-house gas reduction and improvement of air pollution problem. Especially, as international oil price increases, engine using clean energy are being developed competitively with alternative transportation energy sources development policy as the center. Bio ethanol, one of the renewable energy produced from biomass, gained spotlight for transportation energy sources. Studies are in progress to improve fuel supply methods and combustion methods which are key features, one of the engine technologies. DI(Direct Injection), which can reduce fuel consumption rate by injecting fuel directly into the cylinder, is being studied for Green-house gas reduction and fuel economy enhancement at SI(Spark Ignition). GDI(Galoine Direct Injection) has an advantage to meet the regulations for fuel efficiency and $CO_2$ emissions. However it produces increased number of ultrafine particles, that yet received attention in the existing port-injection system, and NOX. As fuel is injected into the cylinder with high-pressure, a proper injection strategy is required by characteristics of a fuel. Especially, when alcohol type fuel is considered. In this study, we tried to get a base data bio-ethanol mixture in GDI, and combustion for optimization. We set fuel mixture rate and fuel injection pressure as parameters and took a picture with a high speed camera after gasoline-ethanol mixture fuel was injected into a constant volume combustion chamber. We figured out spraying characteristic according to parameters. Also, we determine combustion characteristics by measuring emissions and analyzing combustion.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.4
• /
• pp.30-39
• /
• 2014

The cross flow turbine is economical because of its simple structure. For remote rural region, there are needs for a more simple structure and very low head cross flow turbines. However, in this kind of locations, the water from upstream always flows into the turbine with some other materials such as sand and pebble. These materials will be damage to the runner blade and shorten the turbine lifespan. Therefore, there is a need to develop a new type of cross flow turbine for the remote rural region where there is availability of abundant resources. The new design of the cross flow turbine has an inlet open duct, without guide vane and nozzle to simplify the structure. However, the turbine with inlet open duct and very low head shows relatively low efficiency. Therefore, the purpose of this study is to optimize the shape of the turbine inlet to improve the efficiency, and investigate the internal flow of a very low head cross flow turbine. There are two steps to optimize the turbine inlet shape. Firstly, by changing the turbine open angle along with changing the turbine inlet open duct bottom line (IODBL) location to investigate the internal flow. Secondly, keeping the turbine IODBL location at the maximum efficiency achieved at the first step, and changing the turbine IODBL angle to improve the performance. The result shows that there is a 7.4% of efficiency improvement by optimizing turbine IODBL location (open angle), and there is 0.3% of efficiency improvement by optimizing the turbine IODBL angle.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.11
• /
• pp.791-802
• /
• 2014

Energy shortage is being exacerbated due to the increase of energy consumption and depletion of fossil fuels. In order to release the energy crisis, new types of energy resources such as small hydropower, solar power, wind power and biomass have been already developed or actively researched. Recently, osmotic power, which harvests energy from salinity gradient between seawater and fresh water, is considered as a feasible candidate. Among the osmotic power processes, pressure retarded osmosis (PRO) is widely gaining attention because of no emission of carbon dioxide and less sensitivity to the external environmental conditions. However, PRO process is facing difficulties such as the lack of specialized PRO membrane and optimization technologies. Therefore, PRO was reviewed in this paper in terms of theoretical background, membrane development, process development and fouling mechanism to provide insights and suggest the future direction of PRO research.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.58.2-58.2
• /
• 2011

국립기상연구소는 2000년부터 2010년까지(11년)의 위성자료와 수치모델의 재분석 자료를 이용하여 한반도영역에 대해서 $4km{\times}4km$ 해상도의 태양-기상자원지도를 계산하였다. 이러한 태양-기상자원지도를 기반으로 GIS 분석도구를 이용하여 지역별 태양에너지의 분포와 지역별 태양광의 기후특성을 분석하였다. 연구영역의 행정구역을 구분하고 각 지역별 에너지분포 및 변화특성을 쉽게 분석하기 위하여 GIS 분석도구를 사용하였다. 평균 연누적 태양에너지 자료를 분석한 결과 한반도에서는 경상도가 가장 풍부한 태양광에너지를 받고 있었으며 특히 대구광역시(5047MJ), 부산광역시(5019.4MJ)가 높게 나타났다. 북한지역에서는 함경남도(4719.1MJ)가 가장 풍부한 자원을 가지고 있는 것으로 나타났다. 월별 분포를 분석한 결과 대체로 연누적과 동일하게 남부지방의 경상도가 높은 태양광 에너지를 나타났다. 특히 7월 등의 여름철은 1월에 비해 절대적으로 에너지양이 많았다. 그러나 위도 38도를 중심으로 빈번한 장마전선을 동반한 구름의 이동으로 중부지방이 남부지방과 북부지방에 비해 낮게 나타났다. 또한 2000년 1월부터 2010년 12월까지 월별 시계열 변화를 분석해본 결과 한반도 전역에서 태양광의 증가추세가 나타났다. 특히 부산광역시는 10년간 3.75MJ이 증가하였으며, 서울특별시는 3.645MJ/decade, 함경북도는 3.499MJ/decade의 증가경향을 보였다. 월별 시계열 그래프를 보면 2003년 8월과 2005년 4월을 기준으로 3부분에서 다른 특성이 나타나는데 이것은 각 구간별로 구름산출을 위하여 사용된 정지기상위성이 다르기 때문이다. 각 구간에서 사용된 위성은 GMS-5(2003년 8월 이전), GOES-9(2003년 8월~2005년 3월) 그리고 MTSAT-1R(2005년 4월이후)이다. 추후에는 태양광 자원이 풍부한 지역에 대해서 더욱 상세하게 태양광 에너지의 분포와 변화를 분석해보자 한다. 이러한 지역별 자원분석 자료는 지방자치단체들이 신재생에너지 개발계획을 세우는데 도움을 줄 수 있을 것이다.

• Journal of Wetlands Research
• /
• v.18 no.3
• /
• pp.226-231
• /
• 2016

Land Generated Waste Load Unit(LGWLU) estimation based on land use data is required to understand the impact of land use on water quality. The method of estimating LGWLU based on the monitoring data requires a lot of time and manpower. In this study, we propose a method of land pollution unit load estimation based on land use data with LP optimization. Optimization is the process to obtain the best possible optimal solution in a given condition. This study carried out optimization by using excel solver in Microsoft Excel. This study derived LGWLU of BOD, T-N, T-P in Gongju-Si and Seocheon-Gun by using the 2012 land use map made by ministry of environment based on 2010 satellite image. This study about LGWLU estimation is expected to be able to determine more clearly the water pollution caused by land use changes.