• Journal of Electrical Engineering and Technology
• /
• v.7 no.3
• /
• pp.396-400
• /
• 2012

Novel fabrication method of nanobridge array of various materials was proposed using suspended silicon nanowire array as a sacrificial template structure. Nanobridges of various materials can be simply fabricated by direct deposition with thermal evaporation on the top of prefabricated suspended silicon nanobridge arrays, which are used as a sacrificial structure. Since silicon nanowire can be easily removed by selective dry etching, nanobridge arrays of an intended material are finally obtained. In this paper, metal nanobridges of Ti/Au, around 50-200 nm in thickness and width, 5-20 ${\mu}m$ in length were fabricated to prove the advantages of the proposed nanowire or nanobridge fabrication method. The nanobridges of Ti/Au after complete removal of sacrificial silicon nanowire template were well-established and bending of nanobridge caused by the tensile stress was observed after silicon removing. Up to 50 nm and 10 ${\mu}m$ of silicon nanowire in diameter and length respectively was also very useful for nanowire templates.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.1
• /
• pp.42-48
• /
• 2016

Light-emitting diode (LED) drivers are recently replacing fluorescent lamps; these drivers can operate adaptively with various ballasts without modifying and removing such ballasts. To satisfy these trends, a LED driver that is compatible with both electronic and magnetic ballasts is proposed in this study. Unlike conventional LED drivers, the proposed driver has a ballast recognition circuit and a mode selection circuit to operate ballasts at optimal conditions. Therefore, it features low voltage stress, high efficiency, and good compatibility with both electronic and magnetic ballasts. Moreover, it can be compatible with a wide selection of ballasts from various manufacturers. To confirm the validity of the proposed LED driver, results of the theoretical analysis and experimental verification performed on a 15 W-rated prototype are presented.

• The Korean Journal of Mycology
• /
• v.23 no.1 s.72
• /
• pp.86-91
• /
• 1995

Isoenzymatic analysis related with cadmium adaptation and detoxifying mechanism were carried out upon Rhizopus oryzae. When cadmium was added into R. oryzae culture, activities of malate dehydrogenase (MDH) and glucose phosphate isomerase (GPI) related with carbohydrate metabolizing pathways were stimulated. Novel isoenzyme CAT-2 related with removing intracellular toxic peroxides, was induced lately and derepressed very highly. On the other hand, lactate-catabolizing enzymes such as lactate dehydrogenase (LDH) and alcohol dehydrogenase (ADH) were repressed. These results strongly suggest that, under cadmium stress, much of derepression of enzymes relating with central metabolism such as TCA cycle that produces high yield of energy and relating with removal of toxic peroxides should be necessary.

• Journal of radiological science and technology
• /
• v.42 no.4
• /
• pp.285-290
• /
• 2019

Magnetic resonance imaging is a technique specialized in soft tissue imaging with high contrast resolution without in vivo ionization and has been widely used in various clinical settings. In particular, the recent increase in social stress factors has been used in the diagnosis of pituitary adenoma, the incidence increases rapidly. Recently, due to the development of magnetic resonance imaging, it is possible to diagnose micro pituitary adenoma, but despite the use of contrast medium, there has been a difficulty in diagnosing the pituitary adenoma due to its small size and noise. In order to solve this problem, a proposed method of separating signal components image and noise components image from a measured image is applied, and the improvement of diagnostic efficiency is attempted by removing noise. As a result, it was confirmed that the image quality was improved as a whole by applying SNR for 30 subjects data. It is expected that this study will be useful as a pre-processing method for improving the image quality and developing diagnostic indicators of pituitary adenoma.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.5
• /
• pp.372-375
• /
• 2021

A three-leg inverter-type isolated DC-DC Converter that can use 220 and 440 V grid input voltages is introduced. The secondary circuit structure of the proposed topology is center-tap, which is the same as the conventional phase-shifted full-bridge converter. However, the primary circuit structure is composed of a three-leg inverter structure and a transformer, in which two primary windings are connected in series. The proposed circuit structure has a wider input voltage range than the conventional phase-shifted full-bridge converter, and the circulating-current on the primary-side is reduced. In addition, the voltage stress at the secondary rectifier is greatly improved, and high efficiency can be achieved at a high input voltage by removing the snubber circuit added to the conventional converter. Prototype converters with input DC of 311 V, output of 622 V, and 50 V and 6 kW class specifications were designed and manufactured to verify the validity of the proposed topology; the experimental results are presented.

• Design & Manufacturing
• /
• v.16 no.1
• /
• pp.50-54
• /
• 2022

Coverglass of electronic equipments is thinner and slimmer, so the glass must have good bending strength. In these days, the polishing edge of glass is used by solid tool like grinding wheel. But solid tool leave micro crack or edge chipping in edge of glass. MR polishing is an optimal method by polishing edge of glass. MR polishing is used MR fluid that is a liquid tool. MR polishing doesn't leave tool path or residual stress, micro crack and edge chipping unlike grinding wheel polishing. In this paper, the results of grinding and MR polishing were compared and analyzed to improve bending strength by minimizing edge chipping of cover glass. It was derived that the depth and size of cracks have a significant influence on the bending strength of the glass edge. The edges of the glass using MR grinding were analyzed to have a better surface and higher bending strength than the glass using abrasive wheel grinding. It was confirmed that MR polishing had an effect on strength improvement by effectively removing cracks in the specimen.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.63-64
• /
• 2020

The purpose of this study is to find out how construction sites workers experience adaptation processes in relation to the prevention of safety accidents in the workplace through the method of grounded theory. In order to understand the experience of preventing safety accidents of workers at construction sites, a grounded theory analysis method was chosen. In order to achieve the purpose of this study, the first questionnaire was sent to 17 people working in the construction site by e-mail, and the participants of the study were met one by one for in-depth interviews. As a result of this study, the paradigm model of the experience of preventing safety accidents of workers at construction sites was classified into causal conditions, contextual conditions, central phenomena, intervening conditions, action/interactions, and outcomes. The conclusions of this study are as follows. First, forming a safety culture that can improve the safety awareness of construction sites is a priority. Second, it is necessary to improve self-management capabilities so that construction workers can accurately diagnose their current state such as their own body, emotion, and cognition and provide appropriate safety education. Third, providing safety education for construction workers with negative thoughts or distorted beliefs about safety accidents needs to include psychological treatment and counseling, such as methods of emotional purification, methods of relieving and managing stress, and methods of removing trauma.

• The korean journal of orthodontics
• /
• v.28 no.1 s.66
• /
• pp.165-174
• /
• 1998

The turnover of collagen is controlled by the balance between collagen synthesis and degradation. The production of collagenase (matrix metalloproteinase-1) and its inhibitor, tissue inhibitor of matrix metallopmteinase-1 (TIMP-1) are one of the substances which regulate this balance. The periodontal ligament fibroblast plays an important role in collagen metabolism during orthodontic treatment and is believed to be an origin of the osteoblast in the alveolar bone. The collagenase secreted by the periodontal ligament fibroblast and the osteoblast initiates the bone resorption by removing the osteoid layer in the alveloar bone. The interleukin-$1{\beta}$ is secreted by the macrophage during orthodontic treatment. The present study was undertaken to assess the effect of mechanical stress and interleukin-$1{\beta}$ on the expression of collagenase and TIMP-1 in the periodontal ligament fibroblasts using reverse transcription polymerase chain reaction and immunohistochemical staining. The periodontal ligament fibroblasts were stitched by placing the $Petriperm dish^{\circledR}$ dish on the top of spheroidal convex watch glass ($5\%$ surface increase) and tented with interleukin-$1{\beta}$ (1.0 ng/ml), or treated with both of them. Treatment with mechanical stress and/or interleukin-$1{\beta}$ resulted in increased collagenase mRNA expression. The mechanical stress treated group (1.61, 1.62, 1.37 fold increase), the interleukin-$1{\beta}$, tented group (1.68, 1.60, 3.78 fold increase), the mechanical stress and interleukin-$1{\beta}$ treated group (1.89, 1.72, 5.48 fold increase) induced increases in collagenase mRNA compared with the control group after 2, 4, 8 hours respectively. But TIMP-1 mRNA expressions at experimental groups were decreased after 2, 4 hours and increased after 8 hours. The mechanical stress treated group (0.16, 0.49 fold decrease and 3.77 fold increase), the interleukin-$1{\beta}$ treated group (0.15,0.44 fold decrease and 4.46 fold increase), the mechanical stress and interleukin-$1{\beta}$ tented group (0.15, 0.69 fold decrease and 4.81 fold increase) induced changes in TIMP-1 mRNA compared with the control group after 2, 4, 8 hours, respectively. Immunohistochemical stain showed that increased collagenase and TIMP-1 staining of the mechanical stress tented group, the interleukin-$1{\beta}$ treated group, and the mechanical stress and interleukin-$1{\beta}$ treated group compared with that of the control group after 8 hours. These findings suggest that mechanical stress and interleukin-$1{\beta}$ regulate expression of collagenase and TIMP-1.

• Journal of Korean Public Health Nursing
• /
• v.9 no.2
• /
• pp.33-42
• /
• 1995

The purpose of this study is to identify the smoking patterns and their relevant factors of the public officials who are placed to guide people's way of thinking as conservative middle-income group and thereupon, provide for basic data which can be used to reduce the diseases and death rate caused by smoking in terms of preventive medicine. For this purpose, 170 public officials working for the government agencies located in seoul were surveyed for Jan. 10-Jan. 20, 1995. The results of survey can be analyzed/summarized as follows; 1. In terms of daily smoking frequencies, 50 officials $(29.4\%)$ are driven by stress to smoke. Among these offcials, 250nes $(50.0\%)$ smoke 20-30 times a day. Meanwhile, 22 officials $(12.9\%)$ answered that they smoke for pleasure and comfort, and among them 6 officials $(21.4\%)$ smoke 20-30 times a day. 26 officials $(15.3\%)$ are found to be nicotine­addicted physically or psychologically, and to 10 of them $(35.7\%)$ smoke 20-30 times a day. On the other hand, 10 officials $(5.9\%)$ have habit of smoking and 4 of them $(40.0\%)$ smoke 20-30 times a day. 2. Out of 50 officials $(24.9\%)$ who began smoking on impulse, 44 actually stopped smoking, and the rest 6 officials did not even implement their plan. In view of successful cigarette-stopping, only 8 officials $(15.4\%)$ out of 44 impulse-driven smokers succeeded in stopping cigarettes, while the rest 36 failed all. Meanwhile, out of those 84 officials $(64.6\%)$. Who smoked for reduced stress, 28 ones succeeded, while the rest 56 ones failed. Out of 20 officials who were nicotine-addicted but attempted to stop smoking, only 2 smokers succeeded and the rest 18 were all failures. 3. Factors involving smoking and Their patterns 1) By age group (30's, 40's and 50's), the smoking patterns can be grouped into stress-removing, nocotine-addictive and habitual ones, respectively. 2) By acadeic background, our officials smoke on impulse or due to nocotine addition. 3) The length of career is co-related with nicotine addition. 4) The ownership of house is related with smoking for comfort or less stress. 5) The number of children is related with impulse-driven smoking or smoking for comfort.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.25 no.2
• /
• pp.87-104
• /
• 1989

Recently, with the tendency of more lightening, high-strength and high-speed in the marine industries such as marine structures, ships and chemical plants, the use of the aluminium Alloy is rapidly enlarge and there occurs much interest in the study of corrosion fatigue crack characteristics. In this paper, the initiation of surface crack and the propagation characteristics on the base metal and weld zone of 5086-H116 Aluminium Alloy Plate which is one of the Al-Mg serious alloy(A5000serious) used most when building the special vessels, were investigated by the plane bending corrosion fatigue under the environments of marine, air and applying cathodic protection. The effects of various specific resistances on the initiation, propagation behavior of corrosion fatigue crack and corrosion fatigue life in the base metal and heat affected zone were examined and its corrosion sensitivity was quantitatively obtained. The effects of corrosion on the crack depth in relation to the uniform surface crack length were also investigated. Also, the structural, mechanical and electro-chemical characteristics of the metal at the weld zone were inspected to verify the reasons of crack propagation behavior in the corrosion fatigue fracture. In addition, the effect of cathodic protection in the fracture surface of weld zone was examined fractographically by Scanning Electron Microscope(S.E.M.). The main results obtained are as follows; (1) The initial corrosion fatigue crack sensitibity under specific resistance of 25Ω.cm% show 2.22 in the base metal and 19.6 in the HEZ, and the sensitivity decreases as specific resistance increases (2) By removing reinforcement of weldment, the initiation and propagation of corrosion crack in the HAZ are delayed, and corrosion fatigue life increases. (3) As specific resistance decreases, the sensitivity difference of corrosion fatigue life in the base metal and HAZ is more susceptible than that of intial corrosion fatigue crack. (4) Experimental constant, m(Paris' rule) in the marine environment is in the range of about 3.69 to 4.26, and as specific resistance increases, thje magnitude of experimental constant, also increases and the effect by corrosion decreases. (5) Comparing surface crack length with crack depth, the crack depth toward the thickness of specimen in air is more deeply propagated than that in corrosion environment. (6) The propagation particulars of corrosion fatigue crack for HAZ under initial stress intensity factor range of $\Delta$k sub(li) =27.2kgf.mm super(-3/2) and stress ratio of R=0 shows the retardative phenomenon of crack propagation by the plastic deformation at crack tip. (7) Number of stress cycles to corrosion fatigue crack initiation of the base metal and the welding heat affected zone are delayed by the cathodic protection under the natural sea water. The cathodic protection effect for corrosion fatigue crack initiation is eminent when the protection potential is -1100 mV(SCE). (8) When the protection potential E=-1100 mV(SCE), the corrosion fatigue crack propagation of welding heat affected zone is more rapid than that of the case without protection, because of the microfissure caused by welding heat cycle.