• 대한원격탐사학회지
• /
• 제18권5호
• /
• pp.273-280
• /
• 2002

This paper describes a mathematical model and its utilization algorithm for calculating the accurate target position on the ellipsoidal earth surface which corresponds to a range-azimuth coordinates of unprocessed synthetic aperture radar (SAR) images. A geometrical model which is a set of coordinate transformations is described. The side-looking directional angle (off-nadir angle) is determined in an iterative fashion by using the model and the accurate slant range which is calculated from the range sampling timing of the instrument. The algorithm can be applied not only for the geolocation of SAR images but also for the high quality SAR image generation by calculating accurate Doppler parameters.

• 대한원격탐사학회지
• /
• 제23권1호
• /
• pp.1-5
• /
• 2007

Relatively simplified method for determination of surface reflectance has been used by using the ratio between SWIR and VIS band reflectance over land surface. The surface reflectance ratios (SWIR/VIS) were estimated over land in Korea from Terra Moderate Resolution Imaging Spectre-radiometer (MODIS) L1 data. The ratios by using the minimum reflectance technique were lower than those by MODIS operational aerosol retrieval algorithm. Although the comparison between MODIS and sunphotometer Aerosol Optical Thickness (AOT) has a good correlation coefficient (R=0.84), slightly overestimated MODIS AOTs were shown with a slope of linear regression line of 0.89. The comparison between the ratio and AOT dearly exhibit that the error of MODIS AOT could be originated from the underestimated surface reflectances by MODIS operational algorithm.

• Ocean and Polar Research
• /
• 제23권2호
• /
• pp.189-194
• /
• 2001

A practical algorithm for prediction of the sea surface temperatures (SST)from the satellite remote sensing data is presented in this paper. The fluctuations of SST consist of deterministic normals and stochastic anomalies. Due to large thermal inertia of sea water, the SST anomalies can be modelled by autoregressive or Markov process, and its near future values can be predicted provided the recent values of SST are available. The actual SST is predicted by superposing the pre-known SST normals and the predicted SST anomalies. We applied this prediction algorithm to the NOAA AVHRR weekly SST data for 18 years (1981-1998) in the seas adjacent to Korea (115-$145^{\circ}E$, 20-$55^{\circ}N$). The algorithm is applicable not only for prediction of SST in near future but also for nowcast of SST in the cloud covered regions.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제2권2호
• /
• pp.133-138
• /
• 2002

In this paper, we propose an integrated GUI environment of parallel fuzzy inference system fur pattern classification of remote sensing data. In this, as 4 fuzzy variables in condition part and 104 fuzzy rules are used, a real time and parallel approach is required. For frost fuzzy computation, we use the scan line conversion algorithm to convert lines of each fuzzy linguistic term to the closest integer pixels. We design 4 fuzzy processor unit to be operated in parallel by using FPGA. As a GUI environment, PCI transmission, image data pre-processing, integer pixel mapping and fuzzy membership tuning are considered. This system can be used in a pattern classification system requiring a rapid inference time in a real-time.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.253-256
• /
• 2005

The use of satellite remote sensing in maritime safety and security can aid in the detection of illegal fishing activities and provide more efficient use of limited aircraft or patrol craft resources. In the area of vessel traffic monitoring for commercial vessels, Vessel Traffic Service (VTS) which use the ground-based radar system have some difficulties in detecting moving ships due to the limited detection range. A virtual vessel traffic control system is introduced to contribute to prevent a marine accident such as collision and stranding from happening. Existing VTS has its limit. The virtual vessel traffic control system consists of both data acquisition by satellite remote sensing and a simulation of traffic environment stress based on the satellite data, remotely sensed data. And it could be used to provide timely and detailed information about the marine safety, including the location, speed and direction of ships, and help us operate vessels safely and efficiently. If environmental stress values are simulated for the ship information derived from satellite data, proper actions can be taken to prevent accidents. Since optical sensor has a high spatial resolution, JERS satellite data are used to track ships and extract their information. We present an algorithm of automatic identification of ship size and velocity. This paper lastly introduce the field testing results of ship detection by RADARSAT SAR imagery, and propose a new approach for a Vessel Monitoring System(VMS), including VTS, and SAR combination service.

• 대한원격탐사학회지
• /
• 제35권1호
• /
• pp.137-149
• /
• 2019

Traffic emissions are the main cause of environmental pollution in cities and respiratory problems amongst people. This study developed a model based on an integration of support vector regression (SVR) algorithm and geographic information system (GIS) to map traffic carbon monoxide (CO) concentrations and produce prediction maps from micro level to macro level at a particular time gap in a day in a very densely populated area (Utara-Selatan Expressway-NKVE, Kuala Lumpur, Malaysia). The proposed model comprised two models: the first model was implemented to estimate traffic CO concentrations using the SVR model, and the second model was applied to create prediction maps at different times a day using the GIS approach. The parameters for analysis were collected from field survey and remote sensing data sources such as very-high-resolution aerial photos and light detection and ranging point clouds. The correlation coefficient was 0.97, the mean absolute error was 1.401 ppm and the root mean square error was 2.45 ppm. The proposed models can be effectively implemented as decision-making tools to find a suitable solution for mitigating traffic jams near tollgates, highways and road networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권4호
• /
• pp.1555-1570
• /
• 2016

For monitoring forest fires, a real-time system to prevent fires in wider areas should be supported consistently. However, there has still been a lack of the support for real-time system related to forest fire monitoring. In addition, the 'real-time' processing in a forest fire detection system can lead to excessive consumption of energy. To solve these problems, the intelligent data acquisition of sensing nodes is required, and the maximum energy savings as well as rapid and accurate detection by flame sensors need to be done. In this regard, this paper proposes a node built-in filter algorithm for intelligent data collection of sensing nodes for the rapid detection of forest fires with focus on reducing the power consumption of the remote sensing nodes and providing efficient wireless sensor network-based forest environment monitoring in terms of data transmission, network stability and data acquisition. The experimental result showed that battery life can be extended through the intelligent sampling of remote sensing nodes, and the average accuracy of the measurement of flame detection based on the distance is 44%.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.35-38
• /
• 2004

We developed a Near Real-Time Validation System (NRVS) for the Level-2 Products of AQUA Satellite. AQUA satellite is the second largest project of Earth Observing System (EOS) mission of NASA. This satellite provides the information of water cycle of the entire earth with many different forms. Among its products, we have used five kinds of level-2 geophysical parameters containing rain rate, sea surface wind speed, skin surface temperature, atmospheric temperature profile, and atmospheric humidity profile. To use these products in a scientific purpose, reasonable quantification is indispensable. In this paper we explain the near real-time validation system process and its detail algorithm. Its simulation results are also analyzed in a quantitative way. As reference data set in-situ measured meteorological data which are periodically gathered and provided by the Korea Meteorological Administration (KMA) is processed. Not only site-specific analysis but also time-series analysis of the validation results are explained and detail algorithms are described.

• 대한원격탐사학회지
• /
• 제39권3호
• /
• pp.257-268
• /
• 2023

해빙은 지구의 태양에너지 흡수량 및 대기-해양간 열과 물질 교환을 조절함으로써 기후조절자의 역할을 하며 그 생성, 이동, 소멸은 인공위성에 의해 주기적으로 모니터링 되고 있다. 그러나 수동마이크로파방사계 관측을 중심으로 한 저해상 산출물은 해빙 표면이 빠르게 변하는 여름철에 정확도가 크게 떨어지며, synthetic aperture radar (SAR) 관측이 대체재로 떠오르고 있으나 그간의 연구는 주로 겨울철 해빙을 대상으로 이루어졌다. 이 연구에서는 SAR 영상과 global positioning system (GPS) 추적기를 이용하여 해빙의 거칠기, 높낮이, 구조 등 표면 상태 변화가 심한 늦여름~초가을 시기의 해빙 이동 추적 기술을 평가, 분석하였다. 그 결과 겨울철보다는 관측 불확실성이 증가하나 GPS 실측치와의 상관관계는 0.98로 우수했으며, 해빙 농도 50% 이상인 경우에 해빙 농도와 적용 알고리즘의 산출 성능은 상관관계 0.59로 서로 비례하는 것으로 나타났다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1633-1649
• /
• 2017

In remote sensing image processing, the traditional fusion algorithm is based on the Intensity-Hue-Saturation (IHS) transformation. This method does not take into account the texture or spectrum information, spatial resolution and statistical information of the photos adequately, which leads to spectrum distortion of the image. Although traditional solutions in such application combine manifold methods, the fusion procedure is rather complicated and not suitable for practical operation. In this paper, an improved IHS transformation fusion algorithm based on the local variance weighting scheme is proposed for remote sensing images. In our proposal, firstly, the local variance of the SPOT (which comes from French "Systeme Probatoire d'Observation dela Tarre" and means "earth observing system") image is calculated by using different sliding windows. The optimal window size is then selected with the images being normalized with the optimal window local variance. Secondly, the power exponent is chosen as the mapping function, and the local variance is used to obtain the weight of the I component and match SPOT images. Then we obtain the I' component with the weight, the I component and the matched SPOT images. Finally, the final fusion image is obtained by the inverse Intensity-Hue-Saturation transformation of the I', H and S components. The proposed algorithm has been tested and compared with some other image fusion methods well known in the literature. Simulation result indicates that the proposed algorithm could obtain a superior fused image based on quantitative fusion evaluation indices.