• Journal of Drive and Control
• /
• v.19 no.4
• /
• pp.29-35
• /
• 2022

In this paper, we developed a workload index for monitoring the durability test using operation information of an excavator. First, the acceleration and cylinder pressure were selected as load factors by analyzing operation data. Through load correlation analysis according to each load factor, Root Mean Square (RMS) and Work Load Range (WLR) were respectively derived as a load feature representing mechanical load. In addition, the workload index was used to quantify load features. For applying the workload index to monitoring, a real-time monitoring system consisting of sensors and embedded controller was installed on the excavator and the system was integrated with a remote monitoring environment using a wireless network. Results of load monitoring and analysis verified that the developed workload index was effective from the viewpoint of the relative comparison of the workload.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1913-1914
• /
• 2006

Modem Industrial control systems tend to adopt a variety of intelligent wireless device controllers to interface front-end computers with active components of the industrial device. Some of the intelligent control systems come equipped with a wireless SMS(Simple Message Service) interface giving an opportunity to use fault alarm Interlock system. Immediately send warning or alert messages to Mobile devices or remote users. Real time monitoring the SMS systems by Mobile devices. Control systems remotely by mobile devices in emergency situation. In order to provide against system fault, SMS Mobile System will enable system administrator to promptly access, monitor and control the system whenever users want and wherever users are, by utilizing wireless Internet and mobile devices. This paper presents the Mobile SMS system for PAL Control System.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.10
• /
• pp.60-71
• /
• 2012

This paper proposes a new design and implementation of multi-protocol IED for networked control system of multi-induction motor in industrial fields. The experimental multi-induction motor based multi-protocol IED of Modbus/LonTalks/TCP/IP module is designed and fabricated. This article addresses issues in architecture of LonWorks/Ethernet sever, embedded processors architecture for converting Modbus protocol to LonTalks protocol, integrating preconfigured software, and Internet technologies. It is also verified that the multi-induction motor control and monitoring system using LonWorks/Ethernet server have available, interoperable, reliable performance characteristics from the experimental results, especially, the seamless integration of TCP/IP networks with control networks allows access to any control point from anywhere. Thus, the results provide available technical data for remote distributed motor control system of industrial field or building microgrid with LonWorks BAS.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.979-982
• /
• 2003

본 논문에서는 I/O 인터페이스 제어 보드와 ISA 인터페이스 제어 보드, 그리고 레고 기반의 프로토타입을 통해 실시간 신발 공정 컨베이어 제어를 위한 원격 감시 및 제어 시스템을 구현하였다. 컨베이어를 실시간으로 제어하기 위하여 작업의 우선권을 사용자가 정할 수 있는 RTLinux를 사용하였으며, RTLinux 기반으로 디바이스 드라이브를 작성하였다. Client/server분산환경의 웹을 기반으로 실시간 시스템의 구현 및 테스트를 통해 프로토타입의 작동을 확인한다.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.16 no.4
• /
• pp.29-42
• /
• 2020

SCADA (Supervisory Control and Data Acquisition) systems for remote monitoring, data acquisition and control are applied to major industrial infrastructures including power, water and railroad. Recently, there are many researches on key management scheme for secure communication due to change to the open network environment. These systems are located at far distances and are connected to the main control center through various types of communication methods. Due to the nature of these systems, they are becoming the significant targets of cyber attack. We propose an efficient key management scheme which is established on ID-based cryptosystem without an expensive computation on MTU (Master Terminal Unit), Sub-MTU, and RTU (Remote Terminal Unit). The proposed method is secure and effective in key management among multiple legitimate devices.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.908-911
• /
• 2004

There are various researches on mobile robot systems. Connection method between server and client of mobile robot system is one of them. In the case of mobile robot system, when connection method between server and client is wireless than wire, applications may be expanded. Also in remote monitoring environment using mobile robot system, we are interested in an effective transmission of the image information between server and client. In this paper, Bluetooth is used for connection method between server and client. One of the major applications of Bluetooth is the cable replacement for mobile and peripheral devices. Using Bluetooth, we propose the control method of mobile robot system. Bluetooth offers fast and reliable transmissions of both voice and data over the globally available 2.4GHz ISM (Industrial, Scientific and Medical) band. It has the advantage of small size, low power and low cost. It has the disadvantage of limited range and limited bandwidth. Also in order to transfer effectively image information between remote site(server) and mobile robot system(client) using Bluetooth, we applied to MPEG-2 and MPEG-4 image compression techniques and the results are compared with each other.

• Journal of Power System Engineering
• /
• v.10 no.2
• /
• pp.104-110
• /
• 2006

Corrosion has been around for all of recorded history. Cathodic protection is the electrical solution to the corrosion problem. Corrosion is not exactly a new topic. It has been around since the beginning of time. Corrosion is simply the loss of material resulting from current leaving a metal, following through a medium, and returning to the metal at a different point. Corrosion takes many forms and has various names, such as oxidation, rust, chemical, and bacteria action. Regardless of the agent, all corrosion is the result of electrical current flow. Various methods are used to treat corrosion or to try to prevent ti. Some of these include chemical treatment. coatings, and electrical current. Especially, proper impressed current can stop corrosive action on the protected surface. In this article, we introduce the Impressed Current Cathodic Protection (ICCP) Control and monitoring system developed by ourselves. The ICCP system is composed of a power supply, anode, reference electrode and controller. The main issue is to control the current flow on the desired value such that it is possible to force a metal to be more negative(cathodic) than the natural state. From the this process, we can achieve the cathodic protection. Of course, in the developed system, the necessary functions are possessed, such as remote control, monitoring of system fault detection etc. Some experimental results show the system performance and usefulness.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.75-80
• /
• 2010

The present study presented the implementation of a remote control/supervision system for guard lamps used in public illumination with little endeavor by far for safe management, which makes possible to supervise the state and to control the functions remotely including electric safety elements. Especially, the developed system adopts the measurement algorithm for detecting resistive leakage current(Igr) flowing based on the phase difference checkable for sensing at a monitor, being allowable for monitoring at MMI and transmitter for data transmittance. To verify reliability about the algorithm to accurately detect Igr leakage current, the laboratory-based functional test was performed.

• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.19-26
• /
• 2016

In this paper, the existing domestic HVAC systems, devices TCP / IP does not support the most, thereby, not performed remote management, it is necessary to regularly field service, inefficiency and cost bring a burden. This is through a comparison of the IoT-based primary, real-time protocol of what has become a hot topic recently, to be able to control and real-time monitoring through the CCU device in the HVAC system. Compare for this Internet of Things device for real-time monitoring and control of the XMPP, CoAP, MQTT main real-time protocol is used on. Finally, flexibility, light weight, based on MQTT a two-way messaging protocols with reliable message delivery, implements the protocol on the real-time HVAC system in the cloud platform.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.1
• /
• pp.74-81
• /
• 2000

In this paper we have developed an image security system based on Internet Web in order to overcome the problem of existing systems that use the dedicated network. The developed system resolves the safety problem of the centralized control model by adapting the distributed control model based on Web, and has the functions of remote control and automatic monitoring for grouped multiple sites on remote Web browser. And the system can operate various computers or operating system because it' s operating software was designed by the concepts of Java Virtual Machine and Virtual Instrument. Also, our system has not need of additional cost for network construction by using Internet and can greatly improve the managemental efficiency of system because the maintenance and publishing of software updates can be performed through Web Server.