• 한국HCI학회:학술대회논문집
• /
• 2006.02b
• /
• pp.267-274
• /
• 2006

본 연구에서는 사용성 테스트와 사용자 설문조사 단계를 거쳐 고연령계층 사용자를 고려한 통합 리모컨 버튼 레이아웃을 도출하여 고연령층의 사용편의성이 반영된 리모컨의 사용성을 향상시키고자 하였다. 이를 위하여 일차적으로 신체, 인지심리적인 고연령층의 인간요소(human factor)들을 추출한 다음, 고연령계층 중 연령대별 남녀 사용자를 모집하여 현재 사용되는 기존의 리모컨으로 사용자에게 과제를 부과하여 사용성 테스트와 설문조사를 실시하였다. 사용성 테스트 결과를 중심으로, 통합 리모컨 버튼 레이아웃 디자인 시 반영되어야 할 필수 기능 버튼의 도출과, 버튼 배열의 최적화된 모델을 제시 할 수 있었다. 또한 이러한 과정을 통해 UI 디자인 시 지켜져야 할 세가지 요소인, 연관있는 기능의 동일요소 부여로 동작의 상호 의사소통을 고려해야한다는 것(유사성)과 유사기능간 근접배치로 사용자가 동작할 수 있는 버튼을 쉽게 이해하도록 해 주어야 한다는 것(근접성), 그리고 예상되는 연속 동작의 기능을 동선을 고려해서 배치해야 한다는 것(연속성)을 확인하였다. 마지막으로, 한 가지 기준에 의한 일률적인 버튼 배열보다 사용자의 요구사항과 인지적 한계를 반영한 그룹핑을 고려한 버튼 배열이 사용성을 높이는 중요한 요인이라는 것을 알 수 있었다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.184.2-184.2
• /
• 2012

위성의 전장품은 전기적 접속을 위해서 1:1 연결을 하는 Point-to-Point 버스 방식과 여러개의 Slave (Remote Terminal)을 갖고, 일반적으로 1개의 Master (Controller)에 의해서 연결하게 되는 버스 구조를 갖는 접속 채널을 통해서 연결이 된다. 가장 많이 사용되는 방식인 MIL-STD-1553B는 데이터 전송속도가 1Mbps이고, Transformer에 의해서 완전하게 버스와 각 전장품이 완전하게 절연이 되는 구조로, 전기적 고장이 전달되는 것을 방지할 수가 있지만, 설계의 난이도가 높다. 고속 버스는 SpaceWire를 사용하고, 100Mbps이상의 속도를 지원할 수가 있지만, LVDS등의 고속 채널 설계 및 노이즈에 민감한 특성 때문에, 저속의 통신채널에서는 사용하기 어렵다. 저속의 데이터 채널을 위해서는 UART 방식이 사용된다. UART 방식은 RS-422 방식과 RS-485 방식이 사용되지만, 1553B 또는 SpaceWire 등과 같이 프로토콜이 정해지지 않아서, 사용자가 직접 프로토콜을 지정해야하는 문제가 있다. 또한 RS-422은 1:1 방식의 Point-to-Point UART를 위해서 사용되고, RS-485는 버스 방식의 연결을 지원할 수가 있지만, 동시에 여러개의 TX가 enable되는 경우에는 TX사이에 고장을 일으킬 수 있어서, 1번에 TX가 1개만 사용되도록 제어할 필요가 있다. 또한 RS-485방식의 버스를 구현할 경우에는 1553B처럼 와전하게 절연이 불가능하므로, 전기적이나 기능적으로 485버스에 문제가 발생할 경우에 절연과 같은 기능이 지원되도록 구현이 되어야 한다. 본 논문에서는 안정적인 485 UART버스 구현을 위한 기술에 대해서 평가하고 분석하도록 하겠다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.128-128
• /
• 2010

중적외선 영역은 장애물에 의해서 파장의 흡수가 거의 일어나지 않기 때문에 적외선 소자에서 널리 이용되고 있다. 현재 대부분의 중적외선 소자에는 HgCdTe (MCT)가 사용되고 있지만, 3성분계 화합물이 가지는 여러 문제를 가지고 있다. 반면에, 2성분계 화합물인 인듐안티모나이드 (InSb)는 중적외선 영역 ($3-5\;{\mu}m$) 파장 대에서 HgCdTe와 대등한 소자 특성을 나타냄과 동시에 낮은 기판 가격, 소자 제작의 용이성, 그리고 야전과 우주 공간에서 소자 동작의 안정성 때문에 HgCdTe를 대체할 물질로 주목을 받고 있다. InSb는 미국과 이스라엘과 같은 일부 선진국을 중심으로 연구가 되었지만, 국방 분야의 중요한 소자로 인식되었기 때문에 소자 제작에 관한 기술적인 내용은 국내에 많이 알려지지 않은 상태이다. 따라서 본 연구에서는 InSb 소자 제작의 기초연구로 절연막과 pn 접합 형성에 대한 연구를 수행하였다. 절연막의 특성을 알아보기 위해, InSb 기판위에 $SiO_2$와 $Si_3N_4$를 PECVD (Plasma Enhanced Chemical Vapor Deposition)로 증착을 하였다. 절연막의 계면 트랩 밀도는 77K에서 C-V (Capacitance-Voltage) 분석을 통하여 계산하였으며, Terman method 방법을 이용하였다.[1] $SiO_2$는 $120-200^{\circ}C$의 온도 영역에서 계면 트랩 밀도가 $4-5\;{\times}\;10^{11}cm^{-2}$범위를 가진 반면, $240^{\circ}C$의 경우 계면 트랩 밀도가 $21\;{\times}\;10^{11}cm^{-2}$로 크게 증가하였다. $Si_3N_4$는 $SiO_2$ 절연막에 비해서 3배 정도의 높은 계면 트랩 밀도 값을 나타내었으며. Remote PECVD 장비를 이용하여 $Si_3N_4$ 절연막에 관한 연구를 추가적으로 진행하여 $7-9\;{\times}\;10^{11}cm^{-2}$ 정도의 계면 트랩 밀도 값을 구할 수가 있었다. 따라서 InSb에 대한 절연막은 $200^{\circ}C$ 이하에서 증착된 $SiO_2$와 Remote PECVD로 증착 된 $Si_3N_4$가 적합하다고 할 수 있다. 절연막 연구와 더불어 InSb 소자의 pn 접합 연구를 진행하였다. n-InSb (100) 기판 ($n\;=\;0.2-0.85\;{\times}\;10^{15}cm^{-3}$ @77K)에 $Be^+$이온 주입하여 p층을 형성하여 제작 되었으며, 열처리 조건에 따른 소자의 특성을 관찰 하였다. $450^{\circ}C$에서 30초 동안 RTA (Rapid Thermal Annealing)공정을 진행한 샘플은 -0.1 V에서 $50\;{\mu}A$의 높은 암전류가 관찰되었으며, 열처리 조건을 60, 120, 180초로 변화하면서 소자의 특성 변화를 관찰하였다.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_2
• /
• pp.1273-1282
• /
• 2018

Recently, active research on the Arctic Ocean has been conducted due to the influence of global warming and new Arctic ship route. Although previous studies already calculated quantitative extent of sea ice using passive microwave radiometers, melting at the edge of sea ice and surface roughness were hardly considered due to low spatial resolution. Since Sentienl-1A/B data in Extended Wide (EW) mode are being distributed as free of charge and bulk data for Arctic sea can be generated during a short period, the entire Arctic sea ice data can be covered in high spatial resolution by mosaicking bulk data. However, Sentinel-1A/B data in EW mode, especially in HV polarization, needs significant radiometric correction for further classification. Thus, in this study, we developed algorithms that can correct thermal noise and scalloping effects, and confirmed that Arctic sea ice and open-water were well classified using the corrected dual-polarization SAR data.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.2
• /
• pp.109-121
• /
• 2017

Objective: This study aims to find suitable types and styles for gesture interaction as remote control on smart TVs. Background: Smart TV is being developed rapidly in the world, and gesture interaction has a wide range of research areas, especially based on vision techniques. However, most studies are focused on the gesture recognition technology. Also, not many previous studies of gestures types and styles on smart TVs were carried out. Therefore, it is necessary to check what users prefer in terms of gesture types and styles for each operation command. Method: We conducted an experiment to extract the target user manipulation commands required for smart TVs and select the corresponding gestures. To do this, we looked at gesture styles people use for every operation command, and checked whether there are any gesture styles they prefer over others. Through these results, this study was carried out with a process selecting smart TV operation commands and gestures. Results: Eighteen TV commands have been used in this study. With agreement level as a basis, we compared the six types of gestures and five styles of gestures for each command. As for gesture type, participants generally preferred a gesture of Path-Moving type. In the case of Pan and Scroll commands, the highest agreement level (1.00) of 18 commands was shown. As for gesture styles, the participants preferred a manipulative style in 11 commands (Next, Previous, Volume up, Volume down, Play, Stop, Zoom in, Zoom out, Pan, Rotate, Scroll). Conclusion: By conducting an analysis on user-preferred gestures, nine gesture commands are proposed for gesture control on smart TVs. Most participants preferred Path-Moving type and Manipulative style gestures based on the actual operations. Application: The results can be applied to a more advanced form of the gestures in the 3D environment, such as a study on VR. The method used in this study will be utilized in various domains.

• The Journal of the Korea Contents Association
• /
• v.14 no.2
• /
• pp.482-493
• /
• 2014

Many kinds of carbon emission monitoring systems or integrated systems have been developed so far. However, despite of the development of related techniques, they tend to be lack of statistic processing functions for feedback and policy-making data for users. In this study, a new CEMS (Carbon Emission Monitoring System) has been suggested and implemented in Sejong City, Korea. This system adapted automatic remote reading system from the site management agency as data hub to collect the electricity, gas and water usage of each household. The CEMS is consisted of 6 parts; carbon emission measurement, carbon emission standard setup and management, statistic analysis and the incentives. CEMS is distinguished with other systems for its UIs for users and the administrators. Also, data sharing with urban information system(UIS) of local government to produce information for users and policy-makers. This system makes it possible to investigate the change of energy consumption patterns, especially depending on the family structure and the housing characteristics. Furthermore, analyzing their correlation with carbon emission, it is expected to provide basic data used to establish urban environmental policies.

• Journal of Fisheries and Marine Sciences Education
• /
• v.9 no.1
• /
• pp.49-56
• /
• 1997

It is the developing policy of fishing village of korea that the fishermen are not to leave their fishing village by the construction of abandant and rich fishing village in the social, cultural and economic side of view. The government has promoted the project to improve the fishing and agrarian village from 1992 year, but it is not so helpful to solve the problem of the island and fishing village. Therefore, it has to improve the structure of fishing village and to develope the vital and lively fishing village, Japan had enacted the special law for the promotion of out-island which was called the law for the promotion of Ri-do isalnd, and commenced to develop the Ri-do island. The law for the promotion of Ri-do island is limited to 10 years, but it was amended 10 times and Japanese government has invested as many as budget to Ri-do isalnd during 30 years. Korean government also had enacted and enforced the special law for the promotion of out-isalnd developement referring to Japanese system. However, it is neccessary at first to improve the system that the fishing village is able to develope the fishing port in order to make higher the efficiency of investment. Moverover, the earning differentials bewteen the city and the fishing village has to decrease by the developement of transport convenience and pavement of the road of the out-isalnd and remote fishing village. Otherwise, it is requested rapidily to set up the welfare policy for the aged people because the inhabitants of fishing village become to great age, and inhabitants could be at least diagnose one time every week in the good medical facilities. The ministry of marine and fisheries has to permit the sports fishing business by the small fishing vessel in order to increase the income of inhabitants of fishing village and put a lot of the fishing reefs which are constructed to 2-3 story into the sea. And then the sports fishing business will be flourish by the small fishing vessel.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.2E
• /
• pp.44-49
• /
• 2007

Donghae City - Ulleung Island Line (DC-UI Line) is a representative line for underwater and geoacoustic modeling in the middle western East Sea. In this line, an integrated model of P-wave velocity is proposed for a low-frequency range target (<200 Hz), based on high-resolution seismic profiles (2 - 7 kHz sonar and air-gun), shallow and deep cores (grab, piston, and Portable Remote Operated Drilling), and outcrop geology (Tertiary rocks and the basement on land). The basement comprises 3 geoacoustic layers of P-wave velocity ranging from 3750 to 5550 m/s. The overlying sediments consist of 7 layers of P-wave velocities ranging from 1500 to 1900 m/s. The bottom model shows that the structure is very irregular and the velocity is also variable with both vertical and lateral extension. In this area, seabed and underwater acousticians should consider that low-frequency acoustic modeling is very range-dependent and a detailed geoacoustic model is necessary for better modeling of acoustic propagation such as long-range surveillance of submarines and monitoring of currents.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.29.1-29.10
• /
• 2023

Background: Lone workers are generally defined as individuals who work alone without supervision, including self-employed people. While lone workers are considered a vulnerable group in some countries, there is a lack of research on their health status in domestic studies. Globally, the number of lone workers has been increasing, and this trend has been further accelerated since the coronavirus disease 2019 (COVID-19) pandemic with the rise of remote work. Methods: The study analyzed data from 44,281 participants, excluding unpaid family workers, soldiers, and those with missing data. Lone workers were defined as individuals who reported having no colleagues with the same job at their current workplace. Self-rated health status was categorized as "good" or "poor." Results: This study found a statistically significant higher number of lone workers among women compare to men. The largest occupational category for lone workers was service and sales workers, followed by agriculture and fisheries workers. A majority of non-lone workers reported working 40 hours or less per week, while the majority of lone workers reported working 53 hours or more per week. In addition, lone workers had significantly poorer health status evaluations compared to non-lone workers (odds ratio: 1.297; 95% confidence interval: 1.165-1.444). Conclusions: Further research is needed to investigate the causal relationship between lone work and health, using data collected after the COVID-19 pandemic.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.455-466
• /
• 2013

The aim of this study is to seek application plans of National Ecosystem Survey database based on comparison and examination of feasible analysis methods for distribution characteristics of alien plants. In order to set up a correlation analysis method between alien plants and environmental factors, we had reviewed the 3rd National Ecosystem Survey guide book and consequently, two kinds of analysis method were tested. One was 1/25,000 scale map boundary based analysis and the other was representative mountain area based analysis. In this study we restricted the research area to select reliable surveyed database from whole "2011 National Ecosystem Survey flora database" according to two major criteria. First, an area defined by 1/25,000 scale map boundary and representative mountain area where the number of surveyed flora records should be within top 20%. Second, land cover map should also be built up inside that area. As a result, 25 map boundaries and 25 representative mountain areas were extracted to be analyzed. To limit a boundary for every representative mountain area we had analyzed distribution of environmental factors around that area by manual inspection with SPOT-5 remote sensed satellite image then designated 3km buffer zone from each alien plant location in that area. After then, naturalized index (NI) and urbanized index (UI) was calculated and correlations analysis was carried out. With the result of correlation analysis by map boundary only agricultural land area showed significant value of r (0.4~0.6, correlated) and the rest of factors did not. In the case of representative mountain area, the result showed that agricultural land, road and forest area showed significant value of r (0.6~0.8, highly correlated) which was corresponding to existing researches. Therefore, representative mountain area based method is preferable when using the alien plants database of National Ecosystem Survey for species distribution analysis. And also, considering the way of database utilization is strongly suggested at the first stage of survey planning for promoting active use of national ecosystem survey database.