• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.526-529
• /
• 2007

Due to its inherent feature of high-resolution satellite, there is strong need in some specific area to minimize the processing time required to get a standard image on hand from downlink signal acquisition. However, in general image processing system, it takes considerable time to get image data up to certain level from raw data acquisition because the huge amount of data is dealt sequentially as input data. This paper introduces the high-speed image processing system which generates the image data only for the area selected by user. To achieve the high speed performance, this system includes Quick Look Image display function with sampling, ROI selection function, Image Line Index function, and Distributed processing function. The developed RPS was applied to KOMPSAT-2 320Mbps downlink channel and its effectiveness was successfully demonstrated. This feature to provide the image product very quickly is expected to promote the application of high resolution satellite image.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.602-605
• /
• 2007

COMS SOC is supposed to operate IDACS as a backup of MSC. For the backup operation, there is a route between SOC and MSC for exchanging current version such as radiometric calibration for IMPS, dissemination schedule, encryption key and conversion table for LHGS. DATS C&M S/W is basically designed to control and monitor DATS equipment. However, its capability is extended to monitor the working status of IMPS, LHGS and even MSC IDACS. In addition, DATS C&M SIW can display discrepancy between MSC and SOC when applied version is different each other. This paper presents detailed description on the development of DATS C&M S/W.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.544-547
• /
• 2007

Because data processing systems in recent years are more complicated, main function of the data processing is divided as several sub-functions which are implemented and verified in each subsystem of the data processing system. For the verification of data processing system, many interface tests among subsystems are required and also a lot of simulation systems are demanded. This paper proposes CTHS (Common Test Harness System) for satellite ground segment development which has all of functions for interface test of the data processing system in one PC. Main functions of the CTHS software are data interface, system log generation, and system information display. For the interface test of the data processing system, all of actions of the CTHS are executed by a pre-defined operation scenario which is written by purpose of the data processing system test.

• International Journal of Korean Welding Society
• /
• v.1 no.1
• /
• pp.7-12
• /
• 2001

Real time monitoring has become critical as the use of laser welding increases. Plasma and spatter are measured and used as the signal for estimating weld quality. The estimating algorithm was made using the fuzzy pattern recognition with the area of data that is beyond the tolerance boundary. Also, an algorithm that detects the spatter and the localized defect was created in order to kd the partially produced pit and the sudden loss of weld penetration. These algorithms were used in quality monitoring of the $CO_2$ laser tailored blank weld. Statistical program that can display the laser weld quality result and the signal transition was made for the first stage of the remote control system.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1125-1128
• /
• 2009

Conversion of light energy to electrical energy by using a solar cell has long been considered as one of the option for an electrical energy supply in the future. In the past, commercial use was restricted largely to remote area applications where conventional electricity is expensive. Recently, the major application of the solar cells changed to become generation of residential electricity in urban areas where the electricity is already supplied by the conventional grid. This paper covers the current market and technology status of the solar cells and future prospect of their terrestrial applications. Reviewing market trend, this paper discusses high efficiency approach in silicon solar cells, low cost approach in silicon solar cells and finally covers future prospects of silicon solar cells.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1500-1503
• /
• 2009

In this paper, we studied about atmospheric pressure remote plasma ashing of photoresist(PR), by using a modified dielectric barrier discharge(DBD). The effect of various gas combinations such as $N_2/O_2$, $N_2/O_2+SF_6$ on the changes PR ashing rate was investigated as a function of power. The maximum PR ashing rate of 1850 nm/min was achieved at $N_2$ (70 slm)/ $O_2$ (200 sccm) + $SF_6$ (3 slm). We found that as the oxygen and fluorine radical peaks were increased, the ashing rate is increased, too.

• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.902-904
• /
• 1993

This paper contains the terminal developement for the feeder remote unit in Korea Distribution Automation System. This terminal unit has serval functions in order to do feeder auotmation as following, the open/close controls and gathering status informations of switchgears, getting line currents and voltages, distribution fault. So FRU has four modules to do those functions-Logic Controller, Relay Controller, Data Acquisition, Display, Power Supply etc. The FRU should be on allays, so AC power is supplied before & behind the switchgear. Power Supply is made up with AC/DC, DC/DC, Battery and/or SOLAR CELLS & CONTROLLER. It is important for the supply to protect against some Surges, because surges are happened so many times. Surge test is fellowing the standard IEC 801-5 or IEEE 587.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1464-1466
• /
• 2003

classification of the satellite images provides information about land cover and/or land use. Quality of the classification result depends mainly on the spatial and spectral resolutions of the images. In this study, image fusion in terms of resolution merging, and band integration with multi-source of the satellite images; Landsat ETM+ and Ikonos were carried out to improve classification. Resolution merging and band integration could generate imagery of high resolution with more spectral bands. Precise image co-registration is required to remove geometric distortion between different sources of images. Combination of unsupervised and supervised classification of the fused imagery was implemented to improve classification. 3D display of the results was possible by combining DEM with the classification result so that interpretability could be improved.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.914-916
• /
• 2003

Most current 3D digital maps are 2.5 dimension models based on DEM, which can only be recognized, browsed and operated by a special software, far from meeting the needs of a modern digital city (global) with the distributed, isomerous and multiple application on the real 3D representation and open sharing models. In this paper, a new generation digital city oriented 3D digital map is studied. Firstly, a real 3D digital map representation is presented. And then, some key techniques and methods for browser-based 3D digital map’s representation, display and operation are introduced, which can realized the open sharing of 3D map in distributed, isomerous and multiple application environment. Furthermore, the scale driving technique of proposed 3D digital map is also studied. And currently, some developments based on some of the above methods are being carried to provide key and general platform for other application software’s development.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.174-182
• /
• 2011

Conventional home audio system (e.g. AV Receiver, CD Player etc) has a various functionality of audio play, channel mixing, but the remote controller of these audio players is too complex, difficult for user to manage them effectively. Users want to use these functionalities with more easy, comprehensible way. In this study, "intelligent real-sound presentation technology" that support high quality, realistic audio and the "design of complex information and controller of real sound using intelligent real sound play and control interface" will be introduced. So user can actively, realistically enjoy and play real sound based on user's preference, emotion and circumstance, instead of user's passive service.