• Journal of the Korean association of regional geographers
• /
• v.21 no.2
• /
• pp.364-378
• /
• 2015

As safety Issue becomes one of the hot topics, practical researches and feasible policies are in needs not only for central government but also local officers. The previous studies focused on organizational or institutional approaches and on functional efficiencies, especially how to integrate disaster data at every stage of disaster from preparedness to recovery. Physical and social environments differ from among others, top-down disaster management plan cannot work, and therefore more practical statistics and survey is required to prepare the safety management plan for local government. We aim to suggest a safety environment survey framework and to apply it to two guns (Muan and Goheung). We considered main factors of the framework based on legal requirement for safety index and four stages of disaster progress. Two guns are located in remote area and have a population who are weak to disaster. Action items were drawn from the survey and analysis from the framework respectively. We expect this framework to be expanded to include more urbanized and complex areas.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.62 no.4
• /
• pp.75-86
• /
• 2020

The purpose of this study is to develop a technology for estimating rice growth and damage effect according to bacterial leaf blight using UAV multi-spectral imagery. For this purpose, we analyzed the change of aerial images, rice growth factors (plant height, dry weight, LAI) and disease effects according to disease occurrence by using UAV images for 3 rice varieties (Milyang23, Sindongjin-byeo, Saenuri-byeo) from 2017 to 2018. The correlation between vegetation index and rice growth factor during vegetative growth period showed a high value of 0.9 or higher each year. As a result of applying the growth estimation model built in 2017 to 2018, the plant height of Milyang23 showed good error withing 10%. However, it is considered that studies to improve the accuracy of other items are needed. Fixed wing unmanned aerial photographs were also possible to estimate the damage area after 2 to 4 weeks from inoculation. Although sensing data in the multi-spectral (Blue, Green, Red, NIR) band have limitations in early diagnosis of rice disease, for rice varieties such as Milyang23 and Sindongjin-byeo, it was possible to construct the equation of infected leaf area ratio and rice yield estimation using UAV imagery in early and mid-September with high correlation coefficient of 0.8 to 0.9. The results of this study are expected to be useful for farming and policy support related to estimating rice growth, rice plant disease and yield change based on UAV images.

• Spatial Information Research
• /
• v.23 no.2
• /
• pp.11-20
• /
• 2015

Abstract Monitoring is the most critical element in implementing "forest carbon offset project" to enhance the visibility of CSR (Corporate Social Responsibility) in North Korea. This study is intended to explore monitoring potential in terms of forest carbon offset project using satellite image for Baekdu mountain of North Korea. The permanent record of standard satellite remote sensing system demonstrated its capability of presenting area-wide visual evidences of monitoring conditions in Mt. Baekdu mountain of North Korea (site suitability, carbon stock by forest biomass growth, carbon emission by forest biomass loss, deforestation and degradation, environmental, social and economic impact specified in the Carbon Sequestration Law). It doesn't seem very difficult to comply with monitoring requirements for "the forest carbon offset project" due to the probative value of satellite data. Therefore, it could be considerable or realistic approach to utilize CSR based forest carbon offset project as a point of reform and open-door in North Korea. It is anticipated that this research output could be used as a valuable reference for Korea-based enterprises to ensure monitoring potentials using satellite image in exploring forest carbon offset project sites in North Korea.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.462-465
• /
• 2011

A pulse oximeter is a device which provides non-invasive estimate of percentage oxygen saturation of haemoglobin (SpO2). Due to the limitations of resources of personal health devices (PHDs) including pulse oximeters, they generally transmit the estimated data to a remote monitoring server through a close manager (e.g. mobile device or PC). Therefore, communication protocols between PHDs and a manager is an important research topic in terms of interoperability. In this paper, we present design results of an SpO2 transmission agent based on the ISO/IEEE 11073 (X73) protocol. The protocol is an international standard for PHDs. The agent is an embedded program which generates X73 messages from the estimated pulse rates and SpO2, and transmits the messages to a close manager. The agent consists of a Session, Message and Memory Handler. The Session Handler manages a communication session with the manager, and the Message Handler generates and analyzes the exchanged messages according to the X73 protocol. The Memory Handler extracts pulse rates and SpO2s which are stored in a memory of the pulse oximeter. The SpO2 transmission agent allows pulse oximeters to communicate with managers based on x73 standard. Consequently, the interoperability between the pulse oximeters and the managers is guaranteed.

• Proceedings of the KIEE Conference
• /
• 1993.07a
• /
• pp.504-506
• /
• 1993

The Joint Photographic Experts Group (JPEG) standard was proposed by the International Standardization Organization (ISO/SC 29/WG 10) and the CCITT SG VIII as an international standard for digital continuous-tone still image compression. The JPEG standard has been widely accepted in electronic imaging, computer graphics, and multi-media applications, however, due to the lossy character of the JPEG compression its application in the field of medical imaging has been limited. In this paper, the JPEG standard was applied to a series of head sections of magnetic resonance (MR) images (256 gray levels, $256{\times}256$ size) and its performance was investigated. For this purpose, DCT-based sequential mode of the JPEG standard was implemented using the CL550 compression chip and progressive and lossless coding was implemented by software without additional hardware. From the experiment, it appears that the compression ratio of about 10 to 20 was obtained for the MR images without noticeable distortion. It is also noted that the error signal between the reconstructed image by the JPEG and the original image was nearly random noise without causing any special-pattern-related artifact. Although the coding efficiency of the progressive and hierarchical coding is identical to that of the sequential coding in compression ratio and SNR, it has useful features In fast search of patient Image from huge image data base and in remote diagnosis through slow public communication channel.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.139-147
• /
• 2008

More precise estimation of the bed change, primary cause of flood damage, has been recognized significant for designs of levees and other river facilities. In this study, the long-term bed change was examined as the application of the relatively new Surface-water Modeling System (SMS) Model because there has not been broad verification of the model empirically on river of South Korea. This 2-dimensional model was used to examine the bed change of Pochon Stream Basin, a tributary of Imjin River, where heavy rain damages annually occur. First, in order to verify the model, the simulating period was set from 1986 to 1998 because of the existence of the field measurements. Cross sectional field measurements of 1986 were used for the initial condition and output were compared and analyzed with the observed cross sectional data in 1998. As the results of the verification, the comparison in lateral and streamwise bed level between results from the model and the field measurements showed a reasonable agreement except for the some cases of local scours. However, in terms of the quantitative comparison, the change of the bed elevations for each cross section for 1998 was rather underestimated than that of the field measurements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.11
• /
• pp.1960-1972
• /
• 2006

In this thesis, GPS and the electronic mapping were used to realize such a system by recognizing license plate numbers and identifying the location of objects that move at synchronous times with simulated movement in the electronic map. As well, throughout the study, a camera attached to a PDA, one of the mobile devices, automatically recognized and confirmed acquired license plate numbers from the front and back of each cu. Using this mobile technique in a wireless network searches for specific plate numbers and information about the location of the car is transmitted to a remote sewer. The use of such a GPS-based system allows for the measurement of topography and the effective acquisition of a car's location. The information is then transmitted to a central controlling center and stored as text to be reproduced later in the form of diagrams. Getting positional information through GPS and using image-processing with a PDA makes it possible to estimate the correct information of a car's location and to transmit the specific information of the car to a control center simultaneously, so that the center will get information such as type of the cu, possibility of the defects that a car might have, and possibly to offer help with those functions. Such information can establish a mobile system that can recognize and accurately trace the location of cars.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.67-73
• /
• 2016

Recently, wireless power transmission has attracted much interest and is the subject of much research in industry and academia. As its name implies, it is a technology which involves transferring power without wires. This paper presents the design of an ICT-based wireless power transmission system. The proposed system consists of a wireless transceiver unit and high-efficiency coil unit, which can increase both the transmission efficiency and the effective power distance. In particular, the wireless transceiver unit was designed to work with the ICT technique to enable real-time remote monitoring. Also, studies were done relating to the effect of reducing the standby power. The optimal frequency of IGBT devices used in industrial wireless power systems of 20[KHz] was utilized. The values of $23.9[{\mu}H]$ and $2.64[{\mu}F]$ were selected for L and C, respectively, through many field experiments designed to optimize the system design. In addition, an output current controlling algorithm was developed for the purpose of reducing the standby power. The results presented in this paper represent a 75[%] to 85[%] higher power transmission efficiency with a 10[%] increase in the effective power transmission distance compared with the existing systems. As a result, the proposed system exhibits a lower standby power and maintenance costs. Also, the designed wireless transceiver unit facilitates fault detection by means of user acquired data with the development of the ICT applied program.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.293-304
• /
• 2004

Recently, caching for the database-backed web applications has received much attention. The results of frequent queries could be cached for repeated reuse or for efficient processing of the relevant queries. Since the emergence of XML as a standard for data exchange on the web, today's web applications are to retrieve information from the remote XML sources across the network, and thus it is desirable to maintain the XML query results in the cache for the web applications. In this paper, we describe implementation of an XML query processing system that supports cache-answerability of XML queries, and evaluate its performance. XML path expression, which is one of the core features of XML query languages including XQuery, XPath, and XQL was considered as the XML query. Their result is maintained as an XML materialized view in the XML cache. The algorithms to rewrite the given XML path expression using its relevant materialized view proposed in [13] were implemented with RDBMS as XML store. The major issues of implementation are described in detail. The results of performance experiments conducted with the implemented system showed effectiveness of cache-answerability of XML queries. Comparison with previous research in terms of performance is also Provided.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.2
• /
• pp.155-161
• /
• 2010

Recently, the electromagnetic techniques of the eddy current testing(ECT), alternating current field testing, magnetic flux leakage testing and remote field testing have been used as a nondestructive evaluation method based on the electromagnetic induction. The eddy current testing is now widely accepted as a NDE method for the heat exchanger tube in the electric power industry, chemical, shipbuilding, and military. The ECT system mainly consists of the synthesizer module, analog module, analog-to-digital converter, power supplier, and data acquisition and analysis program. In this study, the synthesizer module and the analog module which are essential to the ECT system were primarily developed. The developed ECT system is basically a multifrequency type which is able to inject the maximum four frequencies based on the frequency and time domain multiplexing method. Conclusively, we confirmed that the EC signal was processed appropriately in each circuit modules, and the Lissajous EC signal was displayed in the impedance plane.