• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.532-534
• /
• 2004

The advancement of electronics and telecommunication technologies has forced the risk management system for underground metallic structures to evolve into the remote monitoring and control system. Especially, facilities such as gas pipelines, oil pipelines and water distribution lines might make hazardous effect on human safety without continuous monitoring and control. As a result, pipeline engineers have applied cathodic protection system to prevent the degradation of their facilities by corrosion and carried out a periodic monitoring of the pipe-to-soil (P/S) potentials at numberous test boxes along their pipelines. The latter action on a road in downtowns, however, is so much dangerous that the inspectors should be ready to suffer the threatening of their lives and maintenance. In order to minimize these social costs and hazards, a stand-alone type corrosion monitoring equipment which can be installed in test box, store the P/S data for given Belied and send the data by wired/wireless telecommunications is under development. In order to obtain the exact P/S data, however, a reference electrode should be located as close to the pipeline as possible. Actually, the measured potential by a conventional portable reference electrode contain inevitably an IR drop portion caused by the current flow from the cathodic protection rectifier or the subway railroad. To minimize this error, it is recommended that the reference electrode should be buried within 10 cm from the pipeline. In this paper, we describe the design parameters for fabricating the permanent type reference electrode and the characteristics of the developed reference electrode.

• Journal of Internet Computing and Services
• /
• v.6 no.3
• /
• pp.31-43
• /
• 2005

OTAR system is a highly authentic key management system that has functions with access control. data integrity and data confidentiality, In this paper, we analyze the existing TIA/EIA Over-The-Air-Rekeying key managements protocol. focused to symmetric ciphers. It can be used to understand the technical trend on technologies about TIA/EIA OTAR standardization. This results can be used to evaluate security properties of a remote rekeying, The proposed system contains a highly reliable system synchronization.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.297-299
• /
• 1998

As there comes out better and better solutions for delivering multimedia data on the internet, the number of WebCAM sites which transmits pictures of any spot to the user's system is getting increased. WebCAM service over the internet can be compared with the CATV in that it is beyond the spatial constraints. In this project, we construct a WebCAM site Which performs not only the fundamental WebCAM functions of capturing images and of transmitting them periodically but also various kinds of modules carrying out tasks such as image processing, remote control of the camera, processing multiple user requests, making panorama views and so on using Java which is the most popular language for the internet or CGI. The past images are stored in a database implemented for the WebCAM system, so the system can be extended to get over the constraints in time also.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2212-2214
• /
• 1998

As there comes out better and better solutions for delivering multimedia data on the internet, the number of WebCAM sites which transmits pictures of any spot to the user's system is getting increased. WebCAM service over the internet can be compared with the CATV in that it is beyond the spatial constraints. In this project, we construct a WebCAM site which performs not only the fundamental WebCAM functions of capturing images and of transmitting them periodically but also various kinds of modules carrying out tasks such as image processing, remote control of the camera, processing multiple user requests, making panorama views and so on using Java which is the most popular language for the internet or CGI. The past images are stored in a database implemented for the WebCAM system, so the system can be extended to get over the constraints in time also.

• Spatial Information Research
• /
• v.15 no.3
• /
• pp.237-249
• /
• 2007

There are about 22,000 national control points throughout this nation. However, in order to identify the location data of a national control point, a control point result table is needed. And although the control points are important national facilities, due to the fact that these points located at remote areas such as on top of mountains, the facilities are being maintained via on-site inspection without any protections around them. In this research, by taking the locations where the control points are placed into consideration, a specialized RFID tags that can be attached to the national control point's marker has been developed, and CDMA-ready PDA based mobile Web System and national control point control system are developed as well. With help of these systems, control point data can be checked at the seen, and national control point maintenance personnel can find out about maintenance status and keep track of usage record. When these systems are taken into effect, access to the national control point data becomes easy, fast response to the change in data can be possible, and management efficiency will go up. When the Ubiquitous society becomes reality, the importance of location information will be high. Therefore, national control points using above mentioned RFID tags will not only be useful to the control point users and maintenance personnels such as professional land surveyors, but also useful when providing location based services to people, and it will become an important national infrastructure in terms of providing absolute location information.

• Journal of Biosystems Engineering
• /
• v.39 no.2
• /
• pp.134-141
• /
• 2014

Purposes: This study was to validate the Robotic Smart Work System that can provides better working conditions and high productivity in unstructured environments like bio-industry, based on a tele-operation system for fruit harvesting with low cost 3-D positioning system on the laboratory level. Methods: For the Robotic Smart Work System for fruit harvesting and cultivation management in agriculture, a vision based tele-operating system and 3-D position information are key elements. This study proposed Robotic Smart Farming, an agricultural version of Robotic Smart Work System, and validated a 3-D position information system with a low cost omni camera and a laser marker system in the lab environment in order to get a vision based tele-operating system and 3-D position information. Results: The tasks like harvesting of the fixed target and cultivation management were accomplished even if there was a short time delay (30 ms ~ 100 ms). Although automatic conveyor works requiring accurate timing and positioning yield high productivity, the tele-operation with user's intuition will be more efficient in unstructured environments which require target selection and judgment. Conclusions: This system increased work efficiency and stability by considering ancillary intelligence as well as user's experience and knowhow. In addition, senior and female workers will operate the system easily because it can reduce labor and minimized user fatigue.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.1173-1175
• /
• 2017

This paper proposes a system for convenient remote control and management of the lockers with a smart phone. The key features of the proposed system are as follows. First, we connect the lockers to the server and then use the authentication procedure to open and close their lockers. Second, we create instant lockers to increase convenience for users who need to use casual necessities. Unlike traditional analog methods, we finally develop certification procedures. Particularly, log data are better secured than traditional ones. The performance assessment of the proposed system is simulated by producing a dummy model. We will show that the proposed system could effectively support opening and closing the lockers using smart phones.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.1-5
• /
• 2023

Most of the production process is performed in a cleanroom in the case of facilities that produce semiconductor chips or display panels. Therefore, environmental management of cleanrooms is very important for product yield and quality control. Among them, airborne particles are a representative management item enough to be the standard for the actual cleanroom rating, and it is a part of the Fab or Facility monitoring system, and the sequential particle monitoring system is mainly used. However, this method has a problem in that measurement efficiency decreases as the length of the sampling tube increases. In addition, a statistically significant test of deterioration in efficiency has rarely been performed. Therefore, in this study, the statistically significant test between the number of particles measured by InSitu and the number of particles measured for each sampling tube ends(Remote). Through this, the efficiency degradation problem of the sequential particle monitoring system was confirmed by a statistical method.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.229-234
• /
• 2002

Under the hostile influence of the extreme space environmental conditions due to the deep space and direct solar flux, the thermal control in space applications is especially of major importance. There are tight temperature range restrictions for electro-optical elements while on the other hand there are low power consumption requirements due to the limited energy sources on the spacecraft. So, we usually have strong requirement of thermal and power control module in space applications. In this paper, the design concept of a thermal and power control module in the MSC(Multi-Spectral Camera) system which will be a payload on KOMPSATII is described in terms of H/W & S/W. This thermal and power control module, called THTM(Thermal and Telemetry Module) in MSC, resides inside the PMU(Payload Management Unit) which is responsible for the proper management of the MSC payload for controlling and monitoring the temperature insides the EOS(Electro-Optic System) and gathering all the analog telemetry from all the MSC sub-units, etc. Particularly, the designed heater controller has the special mode of "duty cycle" in addition to normal closed loop control mode as usual. THTM controls heaters in open loop according to on/off set time designed through analysis in duty cycle mode in case of all thermistor failure whereas it controls heaters by comparing the thermistor value to temperature based on closed loop in normal mode. And a designed THTM provides a checking and protection method against the failure in thermal control command using the test pulse in command itself.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.12
• /
• pp.141-149
• /
• 2022

In this paper, we propose a design of CCTV enlcosure record management system based on blockchain. Since CCTV video records are transferred to the control center through enclosure, it is very important to manage the enclosure to prevent modulation and damage of the video records. Recently, a smart enclosure monitoring system with real-time remote monitoring and opening and closing state management functions is used to manage CCTV enclosures, but there is a limitation to securing the safety of CCTV video records. The proposed system detect modulated record and recover the record through hash value comparison by distributed stored record in the blockchain. In addition, the integrity verification API is provided to ensure the integrity of enclosure record received by the management server. In order to verify the effectiveness of the system, the integrity verification accuracy and elapsed time were measured through experiments. As a result, the integrity of enclosure record (accuracy: 100%) was confirmed, and it was confirmed that the elapsed time for verification (average: 73 ms) did not affect monitoring.