• Title/Summary/Keyword: Remaining Rate

Search Result 834, Processing Time 0.031 seconds

Effects of Cotrolled Ovarian Hyperstimulation (COH) Protocols on Pregnancy and Delivery Rate in In-Vitro Fertilization and Embryo Transfer (체외수정시술시 과배란유도 방법이 임신율에 미치는 영향)

  • Hong, J.E.;Lee, J.S.
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.24 no.3
    • /
    • pp.361-368
    • /
    • 1997
  • A total of 55 patients with various etiologies of infertility particitated in a study comparing two regimens of controlled ovarian hyperstimulation (COH) with GnRH agonists and gonadotropins. Nineteen patients were given an ultra-short stimulation protocol when the agonist was administered for 3 day from Day 2 of the cycle. The remaining 36 patients were given a long stimulation protocol when the agonist was administered from the mid-luteal phase of the cycle preceding the stimulation cycle. The mean number of gonadotropins used per patient was not different between two groups. No significant differences were found in the mean number of oocytes recovered, fertilization rate and embryo cleavage rate between two groups. Pregnancy and delivery rates were higher in ultra-short protocol than in long protocol, but these were not significant. These results suggest that an ultra-short protocol is as effective as a long protocol in in-vitro fertilization and embryo transfer.

  • PDF

A Follow-up Survey on the Socio-medical Status of the Drop-out Cases of Tuberculosis in Jeonju Health Center (보건소등록결핵환자(保健所登錄結核患者)에 대(對)한 사회의학적(社會醫學的) 조사연구(調査硏究))

  • Kim, Jong-Soon
    • Journal of Preventive Medicine and Public Health
    • /
    • v.7 no.1
    • /
    • pp.123-130
    • /
    • 1974
  • A socio-medical survey was carried out on 1,108 cases of pulmonary tuberculosis who had registered and 220 cases unregistered at Jeonju health center in 1973, during from June 1 to July 31, 1974. As the results of this survey, the following conclusions were obtained. 1. Of the total 1,108 cases of pulmonary tuberculosis there were 708 new cases, while remaining 400 were old cases and rate of registration was 4.0 per thousand person. 2. The highest rate of registration of the newly diagnosed pulmonary tuberculosis could be found in bacteriological examination while 54.4 per cent in X-ray examination. 3. As for the educational status of the tuberculosis patients, primary school graduates contituted the greatest proportion or 64.6 per cent, middle school graduates 13.6 per cent, high school graduates 6.8 per cent and collge graduates only 0.7 per cent. 4. By age group of the cases, at age of 20 to 29 years occupied 23.6 per cent (262 out of 1,108 cases), 17.9 per cent at age of 40 to 49 years. 5. The greatest proportion or 38.4 per cent of the cases had no occupation. 6. The living standard of the patient's household, low class constituted 60.6 per cent of the total households. 7. By distribution of residential area, farming area was 5.0 per thousand person, 4.0 in downtwon and suburban areas. 8. The greatest proportion or 70.0 per cent of positive cases in X-ray examination was unregistered in August, 63.6 per cent in July 1973. 9. 220 out of 1,108 cases(19.9%) were unregistered pulmonary tuberculosis in X-ray and bacteriological examinations. 10. For age groups of unregistered caes, most prevalent age group was 30 to 39. 11. Regarding on the cases of unregistration, 'indifference for disease' occupied highest rate with 31.9 percent' and 'private secret' with 15.7 per cent. 12. Of the total 457 cases drop-outed, there were 78 complete heald cases while remaining 207 inactive.

  • PDF

Mass Loss and Changes of Nutrients during Decomposition of Phragmites communis at the Fringe of Stream

  • Mun, Hueong-Tae;Namgung, Jeong;Namgung, Jeong-Hee-Namgung
    • The Korean Journal of Ecology
    • /
    • v.23 no.2
    • /
    • pp.157-161
    • /
    • 2000
  • Mass loss and changes of mineral nutrients during decomposition of Phragmites communis for 13 months from November 1998 to December 1999, were investigated at the fringe of stream at Boryeong, Chungnam Province in Korea. Plant materials, which were collected in November 1998. were divided into leaves, culms and rhizomes. Litterbags, 15${\times}$15 cm, were made of nylon mesh with 2-mm$^2$ holes. At 13 months after installation, remaining mass of leaves, culms and rhizomes was 29.0%, 57.4%, 20.6%, respectively. Mass loss rate of the culms was significantly lower than those of the leaves and rhizomes. The decay rate of leaves, culms and rhizomes was 1.21. 0.42 and 1.48 per year, respectively. Initial concentration of N, P, K, Ca and Mg of leaves. culms and rhizomes was 22.5, 9.0, 15.5 mg/g for N, 0.34. 0.10, 0.33 mg/g for P, 15.0, 12.5. 12.3 mg/g for K, 2.84. 0.80, 0.03 mg/g for Ca. 1.94. 0.97, 0.40 mg/g for Mg, respectively. Concentrations of nutrients were higher in leaves than in culms and rhizomes. Except for N and Mg in rhizomes, there was no immobilization period during the decomposition. In the case of remaining K and Ca, most are lost during the first 3 months. Without any suitable method for removal of dead part, eutrophication of freshwater may be accelerated by dead macrophytes.

  • PDF

Eddy Current and Ultrasonic IRIS Signal Characteristics of Reboiler Tube by Using STS 316L Calibration Specimen (STS 316L 교정시험편을 이용한 재가열기 튜브의 와전류신호와 초음파 IRIS 신호 특성)

  • Tak, Kyeong-Joo;Kim, Byung-Il;Gook, Jin-Seon
    • Journal of the Korean Society for Nondestructive Testing
    • /
    • v.32 no.1
    • /
    • pp.56-63
    • /
    • 2012
  • In this study, a field applicability of reboiler tube was evaluated by comparing ECT signal with IRIS signal about wall loss rate and remaining wall thickness using worked austenite STS 316L ASME standard calibration tube. In the case of wall-loss rate, as a result, tolerance about $20%{\times}4$ flat bottom hole and 10% O D groove(ECT), 80% defect and 10% O D groove(IRIS) occurred up to ${\pm}15%$. In the case of remaining wall thickness, ECT was satisfied with the both tolerance, but tolerance about 80% defect occurred up to ${\pm}15%$ in IRIS. Therefore, if the IRIS is performed for interpretation of non-relevant indication and measurement of wall-loss rate after ECT, reliability is supposed to be improved.

Efficiency of laser-assisted intracytoplasmic sperm injection in a human assisted reproductive techniques program

  • Choi, Kyoung-Hee;Lee, Jung-Hyun;Yang, Yun-Hee;Yoon, Tae-Ki;Lee, Dong-Ryul;Lee, Woo-Sik
    • Clinical and Experimental Reproductive Medicine
    • /
    • v.38 no.3
    • /
    • pp.148-152
    • /
    • 2011
  • Objective: Laser-assisted intracytoplasmic sperm injection (LA-ICSI), also known as micro-opening or thinning of the zona pellucida (ZP) prior to ICSI, may help to reduce mechanical damage to the oocyte during the procedure. The aim of the present study was to evaluate and analyze the efficacy of our institutional LA-ICSI program, which features laser-assisted ZP thinning prior to ICSI, in comparison with conventional ICSI (C-ICSI), performed on patients with different clinical characteristics. Methods: Patients undergoing a total of 212 ICSI cycles were randomly divided into an LA-ICSI group (106 cycles) and a conventional ICSI group (106 cycles). To reduce tissue damage, we thinned the ZP by approximately 70%, using a laser, before ICSI. Patients thus treated formed the LAICSI group. Comparisons included the morphological quality of transferred embryos, blastocyst development of the remaining embryos, and clinical pregnancy, in terms of ICSI method and patient characteristics. Results: Fertilization, development of remaining embryos, and pregnancy rate were significantly higher in the LA-ICSI group compared with the C-ICSI group. Fertilization, embryonic development, and the pregnancy rate were all improved in younger patients (<38 years of age) and in those who underwent a low number of IVF-ET attempts (<3 trials). In addition, the pregnancy rate was increased in older patients. Conclusion: LA-ICSI may be useful in improving the chance of pregnancy in all ICSI patients.

DGA Gases related to the Aging of Power Transformers for Asset Management

  • Kweon, Dongjin;Kim, Yonghyun;Park, Taesik;Kwak, Nohong;Hur, Yongho
    • Journal of Electrical Engineering and Technology
    • /
    • v.13 no.1
    • /
    • pp.372-378
    • /
    • 2018
  • Life management technology is required as the failure risk of aged power transformers increases. Asset management technology is developed to evaluate the remaining life, establish the replacement strategies, and decide the optimal investment based on the reliability and economy of power transformers. The remaining life assessment uses data such as installation, operation, maintenance, refurbishment, and failure of power transformers. The optimal investment also uses data such as maintenance, outage, and social costs. To develop the asset management system for power transformers, determining the degradation parameters related to the aging of power transformers and evaluating the condition of power transformers using these parameters are important. In this study, since 1983, 110,000 Dissolved Gas Analysis (DGA) data have been analyzed to determine the degradation parameters related to the aging of power transformers. The alarm rates of combustible gases ($H_2$, $C_2H_2$, $C_2H_4$, $CH_4$, and $C_2H_6$), TCG, CO, and $CO_2$ were analyzed. The end of life and failure rate (bathtub curve) of power transformers were also calculated based on the failure data from 1981 to 2014. The DGA gases related to discharge, overheating, and insulation degradation were determined based on alarm and failure rates. $C_2H_2$, $C_2H_6$, and $CO_2$ were discharge, oxidation, and insulation degradation parameters related to the aging of power transformers.

A Study on Evaluation Method of AEB Pedestrian Test (보행자 AEB 시험평가 방법에 관한 연구)

  • Kim, BongJu;Kwon, ByeongHeon;Lee, SeonBong
    • Journal of Auto-vehicle Safety Association
    • /
    • v.10 no.4
    • /
    • pp.25-32
    • /
    • 2018
  • Due to the rapid increase in the number of vehicles, the physical and human losses caused by traffic accidents have become serious social problems. In the global trend, there have been active studies conducted on improving safety level of automobile in order to reduce the number of automobile accident. As a result of such research, traffic accidents continue to decline. In the case of South Korea, however, rate of death by automobile accident is 8.5 per 10,000 people and it is a seven rank among the countries in OECD (Organization for Economic Cooperation and Development). This average rate is almost double compared to average automobile accident rate per 10,000 vehicles, of other OECD countries in 2015. Consequently, many studies and policies currently have been conducted and made for increasing safety of pedestrians; however, they are only emphasizing characteristics of pedestrians and drivers. For this reason, this study suggests scenarios for establishment of test standard corresponding with domestic environment and international standard of AEB (Autonomous Emergency Braking) and conducts a real car test by scenarios by setting up a goal with a function for remaining distance after braking and then examine equation by comparing real car tests results and outcome after calculation. This is a theoretical method to predict a relative remaining distance after AEB prior to conducting a real car test for evaluation of safeness of automobile with AEB and it is expected that it solves problem of complication of real car test.

Linear measurement evaluation according to UV-type ultrasonic cleaning of artificial teeth for temporary dentures manufactured using a light-curing type printer produced by a DLP printer (광중합형 프린터로 제작한 임시 의치용 인공치아의 UV형 초음파 세척에 따른 선형측정 평가)

  • Dong-Yeon Kim;Gwang-Young Lee
    • Journal of Technologic Dentistry
    • /
    • v.46 no.1
    • /
    • pp.8-14
    • /
    • 2024
  • Purpose: This study compares the deformation of traditional resin dentures to resin dentures printed with digital light processing (DLP). Methods: Eleven edentulous research models were developed. Ten of them were made with traditional resin dentures. The remaining one was prepared for scanning and 3D (three-dimensional) printing. Ten traditional resin dentures were made, with the remaining artificial teeth created using 3D software and a DLP printer. Traditional resin dentures, 3D printed resin denture artificial teeth, and a denture base with artificial teeth were all cleaned simultaneously in an ultrasonic cleaner for 3 minutes. Three groups were assigned four artificial tooth measurement points, which were then measured with digital calipers. The measured data was analyzed using descriptive statistics. The significance test was conducted using a nonparametric test Kruskal-Wallis test due to the small number of specimens (α=0.05). Results: The traditional resin dentures had the lowest strain rate at -0.04%, while the group that manufactured only artificial teeth had the highest strain rate at -0.09%. However, no statistically significant difference was observed between the 3 groups (p>0.05). Conclusion: During ultraviolet-type ultrasonic cleaning, traditional resin dentures (TD group) and denture base with artificial teeth made of DLP (DD group) demonstrated stable durability, whereas the artificial teeth made of DLP (AD group) with only artificial teeth did not show a good deformation rate.

Determinants and Prediction of the Stock Market during COVID-19: Evidence from Indonesia

  • GOH, Thomas Sumarsan;HENRY, Henry;ALBERT, Albert
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.8 no.1
    • /
    • pp.1-6
    • /
    • 2021
  • This research examines the stock market index determinants and the prediction using the FFT curve fitting of the Jakarta Stock Exchange (JKSE) Composite Index during the COVID-19 pandemic. This paper has used daily data of Jakarta Stock Exchange (JKSE) Composite Index, interest rate, and exchange rate from 15 October 2019 to 15 September 2020, and a total of 224 observations, retrieved from Indonesia Stock Exchange (IDX), Indonesia Statistics Central Bureau and Observation & Research of Taxation. The study covers descriptive statistics, multicollinearity test, hypothesis tests, determination test, and prediction using FFT curve fitting. The results unveil four fresh and robust evidence. Partially, the interest rate has affected positively and significantly the stock market index. Partially, the exchange rate has affected negatively and significantly the stock market index. The F-test result, interest rate, and exchange rate have significantly affected the stock market index (JKSE) simultaneously. Furthermore, the FFT curve fitting has predicted that the stock market fluctuates and increases over time. The results have shown a strong influence of the independent variables and the dependent variable. The value of Adjusted R-Square is 0.719, which means that the independent variables have simultaneously impacted the dependent variable for 71.9%; other factors have influenced the remaining 28.1%.

Decay Rate and Nutrient Dynamics during Litter Decomposition of Quercus acutissima in Gongju and Jinju (공주와 진주지역에서 상수리나무 낙엽의 분해율 및 분해과정에 따른 영양염류 함량 변화)

  • Won, Ho-Yeon;Oh, Kyung-Hwan;Mun, Hyeong-Tae
    • Journal of Wetlands Research
    • /
    • v.14 no.4
    • /
    • pp.537-545
    • /
    • 2012
  • Decay rate and nutrient dynamics during leaf litter decomposition of deciduous Quercus acutissima were compared between Gongju and Jinju for 33 months from December 2008 through March 2011. Percent remaining weight of Q. acutissima leaf litter after 33 months elapsed in Gongju and in Jinju was $41.2{\pm}0.4%$ and $28.3{\pm}0.6%$, and decay constant (k) was 0.39 and 0.61, respectively. Decomposition in Jinju was significantly faster than that in Gongju. This seemed to be related to higher temperature and precipitation in Jinju than those in Gongju during the experimental period. Initial C/N and C/P ratio of Q. acutissima leaf litter was 46.8 and 270.9, respectively. After 33 months elapsed, C/N and C/P ratios in Gongju decreased to 22.0 and 106.8, and those in Jinju decreased to 19.2 and 170.2, respectively. Initial concentration of N, P, K, Ca and Mg in Q. acutissima leaf litter was 8.31, 0.44, 4.18, 9.38, 1.37 mg/g, respectively. After 33 month elapsed, remaining N, P, K, Ca and Mg were 91.0, 85.4, 30.2, 47.9, 11.7% in Gongju, and 67.0, 54.2, 19.9, 30.0, 40.8% in Jinju, respectively. Except for Mg, remaining nutrients of decomposing leaf litter in Jinju were lower than those in Gongju. In case of N and P, initial immobilization was observed, however, only mineralization was observed in K, Ca and Mg during the whole experimental period.