• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.38-46
• /
• 2014

CRC (Cyclic Redundancy Codes) is a error detection method for the date transmission, which is applied to the GRDDP (GOES-R Reliable Data Delivery Protocol) between satellite and GEMS (Geostationary Environmental Monitoring Sensor) on the GEO-KOMPSAT 2B development. This paper introduces a principle of the table based CRC, and explains software implementation results of the CRC8 applied to GEMS.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.225-228
• /
• 2000

In this paper, a design of the reliable video-conference system using CTI(Computer Telephony Integration) technology is proposed. When video-conference is run on the current existing Internet, the transmission delay problem for voice data traffic can be frequently occurred. In order to transmit the real-time voice data through the Internet efficiently, some complicated algorithms such as CODEC(Code/Decode) should be applied. It can cause further excessive processing delay which can affect the overall performance. The voice traffic is usually transmitted through the reliable PSTN(Public Switched Telephone Network) in the CTI system. In this paper a new architecture, in which PSTN for voice traffic and Internet for video traffic are used at the same time instead of using Internet by itself, is proposed to relieve the problems on a video conference.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.4
• /
• pp.201-206
• /
• 2009

The third generation mobile communications system requiring the reliable multimedia data transmission has provided with the reliable voice, data and video services over the variable propagation environment. However the broadband wireless multiple access technologies cause Inter Symbol Interference (ISI) or Multiple Access Interference (MAI) to degrade the performance of W-CDMA (Code Division Multiple Access) system. Constant Modulus Algorithm (CMA) which is frequently used as the adaptive blind equalizers to remove the interfering signal has ill-convergence phenomenon without proper initialization. In this paper, new blind equalization method based on conventional CMA is proposed to improve the channel efficiency, and through computer simulation this is tested over the time varying fading environment of mobile communication system. Consequently, new blind equalization method into concatenated Kalman filter with CMA is verified better than conventional CMA through adopting minimum mean square errors and eye-pattern obtained from algorithm are compared.

• Journal of Communications and Networks
• /
• v.18 no.2
• /
• pp.246-260
• /
• 2016

A major challenge achieving scalable access control for a large number of subscribers in a public broadcast is to distribute key update messages reliably to all stateless receivers. However, in a public broadcast, the rekeying messages can be dropped or compromised during transmission over an insecure broadcast channel, or transmitted to receivers while they were off-line. In this study, we propose a novel group key management scheme. It features a mechanism to allow legitimate receivers to recover the current group key, even if they lose key update messages for long-term sessions. The scheme uses short hint messages and member computation. Performance analysis shows that the proposed scheme has the advantages of scalability and efficient rekeying compared to previous reliable group key distribution schemes. The proposed key management scheme targets a conditional access system in a media broadcast in which there is no feedback channel from receivers to the broadcasting station.

• Journal of Communications and Networks
• /
• v.11 no.3
• /
• pp.306-317
• /
• 2009

We consider the problem of architecting a reliable content delivery system across an overlay network using TCP connections as the transport primitive. We first argue that natural designs based on store-and-forward principles that tightly couple TCP connections at intermediate end-systems impose fundamental performance limitations, such as dragging down all transfer rates in the system to the rate of the slowest receiver. In contrast, the ROMA architecture we propose incorporates the use of loosely coupled TCP connections together with fast forward error correction techniques to deliver a scalable solution that better accommodates a set of heterogeneous receivers. The methods we develop establish chains of TCP connections, whose expected performance we analyze through equation-based methods. We validate our analytical findings and evaluate the performance of our ROMA architecture using a prototype implementation via extensive Internet experimentation across the PlanetLab distributed testbed.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.2
• /
• pp.191-196
• /
• 2010

Power system restoration following a massive or complete blackout starts with energizing the primary restorative transmission system. During this primary restoration process, unexpected overvoltage may happen due to nonlinear interaction between the unloaded transformer and the transmission system. In the case of the Myanmar electric power system, there are so many wide outage experiences, including complete blackout cases, caused by 230kV line faults and so on. Consequently, Myanmar's system operators have been well trained to deal with wide blackouts. Howver, system blackout restoration has been conducted by relying on the experience of only a few specialists. So, more scientific analysis is required to meet the requirements necessary to ensure fast and reliable system restoration. This paper presents analytical results on the primary restorative transmission system of Myanmar, focusing on the problems during the early restoration process. Methodologies are presented that handle load pick-up, terminal voltage and the reactive capability limitation of black-start generators to compensate the Ferranti effect. Static and dynamic simulation with the PSSolution and EMTDC programs respectively for the six cases are performed in order to select the primary restorative transmission lines.

• Proceedings of the Korean Information Science Society Conference
• /
• 2010.06a
• /
• pp.240-241
• /
• 2010

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.07a
• /
• pp.407-407
• /
• 2004

• Advances in aircraft and spacecraft science
• /
• v.5 no.2
• /
• pp.205-223
• /
• 2018

During launch a spacecraft is subjected to a variety of dynamical loads transmitted through the launcher to spacecraft interface or air-born transmission excitations in the acoustic pressure field inside the fairing. As a result, spacecraft are tested on ground to ensure and demonstrate the global integrity of the structure against these loads, to screen the flight hardware for quality of workmanship and to validate mathematical models. This paper addresses the numerical modelling and simulation of the low frequency sine and random vibration tests performed on electrodynamic shaker facilities to comprise the mechanical-borne transmission loads through the launcher to spacecraft interface. Consequently, the paper reviews techniques and methodologies to derive a reliable and representative coupled virtual vibration testing simulation environment based on experimental data. These technologies are explored with the main objectives to ensure a stable, reliable and accurate control while testing. As a result, the use of the derived simulation models in combination with the added value of improved control and signal processing algorithms can lead to a safer and smoother vibration test control of the entire environmental test campaign.

• The Journal of the Acoustical Society of Korea
• /
• v.6 no.3
• /
• pp.17-22
• /
• 1987

This study is to propose more reliable test method in evaluating the sound insulation performance of building element in fields. This method involves the measurements of the incident acoustic intensity and transmitted surface intensity. The incident intensity is determined from measurements of the space averaged sound pressure level in source room. The transmitted surface intensity is measured directly using one microphone and one accelerometer. The results of experiments indicate that this new method makes it possible to give more reliable data than the conventional field test method. The values of trans-mission loss measured by this new method are compared favorably with those obtained using the sound intensity method and theoretical calculation(mass law).