• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.5
• /
• pp.841-846
• /
• 2010

Reliability in electrical power system refers to normal operation for schedule time in some system that action consists. It means that if there is no contingency of electric power supply decrease or load curtailment, reliability of the system is high. In this paper, a method for evaluation of transmission capability is proposed considering reliability standards. Deterministic and probabilistic methods for evaluation of transmission capability has been studied. These researches considered uncertainty of system components or N-1 contingency only. However, the proposed method can inform customers and system operators more suitable transmission capability. Well-being method using state probabilities of system components proves to be a more effective method in this paper comparing with calculation of LOLE(Loss of Load Expectation). The length of calculation is shorter but it can give more practical information to the exact system operators. Well-being method is applied to IEEE-RTS 24bus system to evaluate reliability in case study. The result is compared with a existing way to evaluate reliability with LOLE and it shows that transmission capability connected with adjacent networks. This paper informs system operators and power suppliers of reliable information for operating power system.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.3
• /
• pp.153-159
• /
• 2013

The power transmission system has always been considered critical for a human powered boat(or water bike) since it first showed up at Human Powered Vessel Festival. Mechanical problems, such as abrasions and other damages of the gear system for the power transmission, lead to poor durability and low efficiency of a boat. This paper described mechanical problems and a design process of power transmission system and then suggested the method to solve the problems. It is selected a module and a type of gears that are structurally stable thus can transmit the power durable. Especially the lower gear box is applied to CRP(contra rotating propeller) system for improving the structural stability and the propeller efficiency as well. As the results, the upper and lower gear box are designed and manufactured. And from the trial test, it is confirmed that the power transmission system is reliable.

• Journal of Satellite, Information and Communications
• /
• v.11 no.2
• /
• pp.69-73
• /
• 2016

In order to derive reliable propagation models for future millimeter-wave frequency indoor pico-cellular communications systems, accurate reflectivity data of building materials is necessary. The broad variety of building materials and construction codes makes accurate attenuation prediction very difficult without the support of specific construction data or measurements. This paper derives a transmission and reflection coefficient based on 13 GHz to 28 GHz measurement data. Transmission and reflection is measured by applying change in the reception angle of each building material, such as plasterboard. The transmission and reflection coefficient derived shows a correlation between frequency dependence and angle. As a result, as the reception angle is reduced, the reflected angle from the transmitter that could be received increases, showing that there is a correlation. In addition, the fundamental investigations carried out lay the foundation for radio channel-related research, which is essential for the development of future millimeter-wave communications systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1251-1260
• /
• 2008

Diffuse wireless optical communication offers more robust optical links in terms of coverage and shadowing than line-of-sight links. However, traditional diffuse wireless infrared (IR) transceiver systems are more susceptible to multi-path distortion and great power decrease, which results in limiting high-speed performance. Multi-beam is an effective technique to compensate for multi-path distortion in a wireless infrared environment. The goal of this paper is to analyze the transmission characteristics by replacing traditional diffuse system (TDS) which contains single wide angle transmitter and single element receiver by system consisting of three-beam transmitter and non-imaging receiver (TNS) attached with compound parabolic concentrator (CPC). In the simulation, we use the recursive model developed by Barry and Kahn and build the scenario based on 10 different cases which have been listed in Table 1. Moreover, we also check the reliability of the TNS diffuse link channel by BER test on the basis of different receiver positions and room sizes. The simulation results not only show the basic transmission characteristics of TNS diffuse link, but also are references to design more efficient and reliable indoor infrared transmission systems.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.361-370
• /
• 2004

All active nudes which have no physically direct connection with each other in If network must be able to compose and manage network topology Informations. Besides one active program can be performed by the active nodes when every active packet for this program is transmitted without any loss of packets. Also the active packets should be transmitted effectively to minimize the transmission delay and securely from threatens. In this thesis, the discovery scheme of active nodes is adapted for active nodes in IP networks to compose and manage the topology information. The scheme for the efficient, reliable and secure transmission of active packets is also proposed. The sequence number is assigned to every active packet. If a receiver detects the loss of active packet checking the sequence number, the receiver requests the retransmission of the lost packet to the previous active node. kiter receiving an active packet and adapting security and reliability schemes, intermediate active nodes not only copy and send the Packet Instantly but also apply some suity mechanisms to it. And the active packet transmission engine is proposed to provide these transmission schemes The simulation of the adapted active node discovery scheme and the proposed active packet transmission engine is performed. The simulation results show that the adapted active node discovery scheme is efficient and the proposed active engine has the low latency and the high performance.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.4
• /
• pp.43-50
• /
• 2010

Vehicle-to-Vehicle (V2V) is a special type of vehicle ad-hoc network (VANET), and known as a solution to provide communication among vehicles and reduce vehicle accidents. Geographical routing protocols as Greedy Perimeter Sateless Routing (GPSR) are very suitable for the V2V communication due to special characters of highway and device for vehicles. However, the GPSR has problem that appears local maximum by some stale neighbor nodes in the greedy mode of the GPSR. It can lose transmission data in recovery mode, even if the problem is can be solved by the recovery mode of the GPSR. We therefore propose a Greedy Perimeter Reliable Routing (GPRR), can provide more reliable data transmission, to resolve the GPSR problem in the V2V environment. Simulation results using ns-2 shown that the GPRR reveals much better performance than the GPSR by remarkably reducing the local maximum rate in the greedy mode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.3B
• /
• pp.349-359
• /
• 2004

To provide multicasting service, several multicast protocols for mobile hosts have been proposed. But they include glitches such as a non-optimal delivery route, data loss when hosts move another network, therefore they have some insecure problems about multicast data transmission. In this paper, we consider these problems and propose a new reliable and efficient multicast routing protocol for Mobile If networks. The proposed protocol provides reliable multicast transmission by compensating data loss from the previous agent when a mobile host moves another network. Also it provides additional function that is directly to connect a multicast tree according to the status of agents. It provides more efficient and optimal multicast path. The performance of the proposed protocol is proved by simulation of various conditions.

• Journal of Internet Computing and Services
• /
• v.4 no.3
• /
• pp.47-55
• /
• 2003

Multicast protocols ore developed in order to support group communications efficiently, However. there still exist some issues to be solved for deploy multicast protocol in the public internet. This paper refers problem of existing Reliable Multicast Protocols and redesigns component function, and proposes enhanced reliable multicast transport protocol, This paper proposed a improved multicast transport scheme in NACK based reliable multicast. This scheme is much faster than by sender-initiated or receiver-initiated recovery and latency is smaller. Designed components are implemented in UNIX environment using C programming longuage. Then the protocol was evaluated performance through simulation. As the result, proposed protocol is better than existing protocols in both of transmission delay and packet loss. Especially, proposed protocol in this paper con be used in multicast services needed high reliability.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.957-965
• /
• 1999

그룹간 공동 작업이나 화상 회의와 같은 그룹 통신의 수요가 늘어나면서 멀티캐스팅을 이용한 효율적인 데이타 전송에 대한 요구가 증가하고 있다. 특히 오디오나 비디오 데이타와는 달리 공동 문서 작업이나 그룹간 문서 전송을 위한 데이타 처리를 위해서는 어느 정도의 시간 손실이 있더라도 신뢰성을 보장할 수 있는 멀티캐스트 프로토콜이 요구된다. 그러나 멀티캐스트 전송에서의 신뢰성을 보장하기 위하여 손실 패킷에 대한 재전송 패킷이 전체 그룹으로 멀티캐스트 되는 것은 네트워크 상에 트래픽을 폭증시키는 요인이 된다. 이에 본 논문에서는 지역 그룹에서의 오류 회복을 위한 재전송 제한 기법을 제안하여 손실 패킷의 재전송 과정에서 발생하는 트래픽의 폭주를 제어하고자 한다. 이것은 재전송 패킷이 중복없이 다중 수신자에게 전송될 수 있도록 하여 그룹 내의 재전송 패킷의 양을 줄이고 필요없는 중복 패킷이 네트워크의 효율을 저하시키는 것을 방지하고자 하는 데 그 목적이 있다. Abstract As the size and the geographic span of communication groups increases, efficient data transmission schemes using Multicast service become more and more essential. Especially, unlike audio and video applications, for some collaborative applications and other data delivery components which require ordered and lossless delivery of data, Reliable Multicast Service is needed to ensure consistent presentation across multiple views. Thus error recovery by retransmission of loss data is provided in order to guarantee the reliability of multicast transmission protocol. However, redundant retransmission packets by multicast may cause traffic implosion on the Internet and it can be aggravated with continuous retransmission.This paper describes a Restricted Retransmission Mechanism as an error recovery method of multicast service in a local group, which can handle traffic implosion in retransmission process. It reduces redundant retransmission packets flowing into a local group and supports reliable multicast transmission. The goal of this mechanism is to reduce retransmission packets and decrease the load for group members and networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4B
• /
• pp.303-310
• /
• 2006

In sensor network environments, a sensor node has a limited power because of their resource constraints. Therefore it is important to efficiently use its power in sensor networks. Power consumption of sensor node is closely related to its amount of transmission data. So, we need to reduce the transmission data in order to minimize the power consumption. And sensor networks are inherently unreliable because radio transmission can fail, node can move, and so on. In this paper, we propose the reliable data aggregation protocol in order to these problems. This protocol performs the routing and the query inserting process at the same time to minimize the packet loss caused by network changes. And, this protocol removes the unnecessary routing caused by the periodic routing without query. Additionally, we suggest the countermeasure algorithm against the frequent errors in sensor networks.