• Clinical and Experimental Pediatrics
• /
• 제55권12호
• /
• pp.481-486
• /
• 2012

Purpose: Precocious puberty is defined as breast development before the age of 8 years in girls. The present study aimed to reveal the diagnosis of Korean girls referred for precocious puberty and to compare the constitutional and endocrinological features among diagnosis groups. Methods: The present study used a retrospective chart review of 988 Korean girls who had visited a pediatric endocrinology clinic from 2006 to 2010 for the evaluation of precocious puberty. Study groups comprised fast puberty, true precocious puberty (PP), pseudo PP, premature thelarche, and control. We determined the height standard deviation score (HSDS), weight standard deviation score (WSDS), and body mass index standard deviation score (BMISDS) of each group using the published 2007 Korean growth charts. Hormone tests were performed at our outpatient clinic. Results: The PP groups comprised fast puberty (67%), premature thelarche (17%), true PP (15%), and pseudo PP (1%). Advanced bone age and levels of estradiol, basal luteinizing hormone (LH), and peak LH after gonadotropin-releasing hormone stimulation testing were significantly high in the fast puberty and true PP groups compared with the control group. HSDS, WSDS, and BMISDS were significantly higher in the true PP group than in the control group (P<0.05). Conclusion: The frequent causes of PP were found to be fast puberty, true PP, and premature thelarche. Furthermore, BMISDS were significantly elevated in the true PP group. Therefore, we emphasize the need for regular follow-up of girls who are heavier or taller than others in the same age group.

• 한국해양환경ㆍ에너지학회지
• /
• 제4권1호
• /
• pp.38-46
• /
• 2001

조류 중에 설치한 이중 유벽의 유효성을 검증하기 위하여 유벽 전후 및 유벽사이에서의 유적(oil droplet)의 거동을 실험적 및 수치적으로 연구하였다. 이 연구에는 단일 유벽의 경우 유벽의 유연성이 포유성능에 미치는 영향도 포함되었다. 실험은 유적의 밀도와 근사한 구형의 고체입자가 전방 유벽의 상류 한 지점에서 방류되었을 때 그 궤적을 추적하는 것이 내용이었다. 입자는 방류되었을 때 유동장의 상태에 따라 자유표면으로 부상하거나, 유벽에 충돌 또는 유벽하로 빠져나가는 현상을 나타내게 된다. 본 논문에는 이러한 유적의 이동 경위를 해석함으로써, 이러한 유적의 유적이 운동을 시작하는 영역이 어딘가에 따라 전방유벽하로 기름이 누출될 것인지 아닌지를 판단할 수 있는 방법과 전후 유벽의 흘수의 차 그리고 수심이 이중유벽의 포유성능에 미치는 영향을 해석할 수 있는 방법을 제시하였다.

• Journal of Ginseng Research
• /
• 제41권4호
• /
• pp.556-565
• /
• 2017

Background: Recent studies have revealed that the properties Traditional Chinese Medicine is mostly associated with are substance and energy metabolism. Our study aimed to compare the effect of red ginseng (RG) (warm property) and ginseng leaves (GL; cold property) on the substance and energy metabolism of rats with hypothyroidism. Materials and methods: Rats were administered propylthiouracil intraperitoneally for 20 d to cause hypothyroidism. The reference group was orally administered Aconiti Lateralis Radix Praeparaia [FZ (Fuzi in Chinese)], while both the RG and GL groups were orally administrated crude drugs. The rectal, tail, toe, and axilla temperature of the rats were assayed every 3 d. Oxygen consumption, carbon dioxide production, heat production, and energy expenditure were measured via TSE phenoMaster/LabMaster animal monitoring system. Adenosine monophosphate-activated protein kinase, $Na^+-K^+$-ATPase, fumarase, pyruvic acid and cyclic adenosine monophosphate/cyclic guanosine monophosphate were determined. Results: The lower levels of triiodothyronine, tetraiodothyronine, and thyrotropin-releasing hormone and the higher level of thyroid stimulating hormone revealed the successful establishment of a hypothyroidism model. Oxygen consumption, carbon dioxide production, heat production, and energy expenditure in the FZ and RG groups were obviously increased. The activity of $Na^+-K^+$-ATPase and fumarase in the FZ and RG groups was significantly increased. The cyclic adenosine monophosphate/cyclic guanosine monophosphate level in the FZ and RG groups was increased, while the GL group showed the opposite. Conclusion: Our research provides a new way to explore the efficiency of Chinese medicine on the basis of the relationship between drug property and effects on substance and energy metabolism.

• 대한족부족관절학회지
• /
• 제21권2호
• /
• pp.55-60
• /
• 2017

Purpose: Stiffness in the first metatarsophalangeal joint after surgery for hallux valgus has been reported. The goal of this study was to test the efficacy of releasing plantar aponeurosis for improving the range of extension in the first metatarsophalangeal joint that was limited after hallux valgus surgery. Materials and Methods: Thirteen patients (1 man, 12 women [17 feet]; median age, 54.4 years; range, 44~69 years) with limited first metatarsophalangeal joint extension after hallux valgus surgery, who underwent an additional procedure of plantar aponeurosis release between March 2015 and August 2015, were included. Subsequently, the passive range of extension in the first metatarsophalangeal joint was evaluated via knee extension and flexion positions. Hallux valgus angle, inter-metatarsal angle, distal metatarsal articular angle, and talo-first metatarsal angle were measured on weightbearing dorsoplantar and lateral radiographs of the foot preoperatively. Results: The mean range of extension for the first metatarsophalangeal joint improved significantly, from $2.5^{\circ}$ to $40.9^{\circ}$ in the knee extension position (p<0.00). The mean extension range for the first metatarsophalangeal joint also improved, from $18.2^{\circ}$ to $43.2^{\circ}$ in the knee flexion position (p<0.00). In all patients, congruence of the first metatarsophalangeal joint was recovered. Conclusion: Plantar aponeurosis release is an effective additional procedure for improving the extension range of the first metatarsophalangeal joint after hallux valgus surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제45권6호
• /
• pp.332-342
• /
• 2019

Objectives: Socket grafting is vital to prevent bone resorption after tooth extraction. Several techniques to prevent resorption have been described, and various bone graft substitutes have been developed and used with varying success. We conducted this pilot study to evaluate the performance of nanohydroxyapatite (nHA) derived from chicken eggshells in socket preservation. Materials and Methods: This was a prospective, single center, outcome assessor-blinded evaluation of 23 sockets (11 patients) grafted with nHA and covered with platelet-rich fibrin (PRF) membrane as a barrier. Bone width and radiographic bone density were measured using digital radiographs at 1, 12, and 24 weeks post-procedure. Postoperative histomorphometric and micro-computed tomography (CT) evaluation were performed. The study protocol was approved by the Institutional Ethics Committee. Results: All patients had uneventful wound healing without graft material displacement or leaching despite partial exposure of the grafted socket. Tissue re-epithelialized with thick gingival biotype (>3 mm). Width of the bone was maintained and radiographic density increased significantly with a trabecular pattern (73.91% of sockets) within 12 weeks. Histomorphometric analysis showed 56.52% Grade 3 bone formation and micro-CT analysis revealed newly formed bone with interconnecting trabeculae. Conclusion: Use of a PRF membrane with nHA resulted in good bone regeneration in sockets. Use of a PRF membrane prevents periosteal-releasing incisions for primary closure, thereby facilitating the preservation of keratinized mucosa and gingival architecture. This technique, which uses eggshell-derived nHA and PRF membrane from the patient's own blood, is innovative and is free of disease transfer risks. nHA is a promising economic bone graft substitute for bone regeneration and reconstruction because of the abundant availability of eggshell waste as a raw material.

• KSBB Journal
• /
• 제22권6호
• /
• pp.433-437
• /
• 2007

본 연구에서는 나노임프린트 리소그래피를 이용하여 500 nm line, 600 nm pore, $1{\mu}m$ pore, $2.5{\mu}m$ pore의 마이크로 수준에서 나노 수준에 이르는 다양한 크기와 모양의 nanopore 형태 패턴을 제작하였다. Thermal imprint 방식과 달리 상온, 저압에서 임프린팅이 가능하며 사용되는 스탬프의 수명을 늘리고 보다 미세하고 복잡한 형태의 패턴을 제작할 수 있는 UV-assisted imprint 방식을 사용하였다. E-beam lithography로 패턴을 각인한 quartz소재의 스탬프를 사용하였으며 스탬프의 재질이 투명하여 UV 조사시 UV curable resin이 경화될 수 있도록 하였다. 또한 스탬프의 표면을 (heptadecafluoro-1,1,2,2-tetrahydrodecyl) trichlorosilane의 monolayer 층으로 미리 코팅하여 임프린트 후 스탬프와 기판과의 releasing을 쉽게함과 동시에 패턴의 일부가 스탬프에 묻어 나와 전사된 패턴에 defect가 없도록 하였다. 또한, gold를 미리 증착하여 임프린팅함으로써 lift-off 시에 필요한 hi-layer 층이 필요 없게 되어 산소 플라즈마를 이용한 에칭이 더욱 쉽고 lift-off 공정이 생략될 수 있도록 하였다. 나노임프린트 공정에 있어 가장 큰 문제점은 잔여층의 생성이며 이러한 잔여층을 제거하고자 산소 플라즈마 에칭을 하였다. 에칭공정을 통해 gold의 표면이 완전히 드러났으며 산소 플라즈마를 통해 gold의 표면이 친수성으로 바뀌어 추후 단백질 고정화를 더욱 쉽게 하였다. 그리하여 나노임프린트 기술을 이용해 나노크기의 바이오소자 제작을 가능하게 하였다.

• IMMUNE NETWORK
• /
• 제11권6호
• /
• pp.376-382
• /
• 2011

Background: Carbon monoxide (CO) is a cytoprotective and homeostatic molecule with important signaling capabilities in physiological and pathophysiological situations. CO protects cells/tissues from damage by free radicals or oxidative stress. NAD(P)H:quinone oxidoreductase (NQO1) is a highly inducible enzyme that is regulated by the Kelch-like ECH-associated protein 1 (Keap1)/nuclear factor erythroid 2-related factor 2 (Nrf2)/antioxidant response element (ARE) pathway, which is central to efficient detoxification of reactive metabolites and reactive oxygen species (ROS). Methods: We generated NQO1 promoter construct. HepG2 cells were treated with CO Releasing Molecules-2 (CORM-2) or CO gas and the gene expressions were measured by RT-PCR, immunoblot, and luciferase assays. Results: CO induced expression of NQO1 in human hepatocarcinoma cell lines by activation of Nrf2. Exposure of HepG2 cells to CO resulted in significant induction of NQO1 in dose- and time-dependent manners. Analysis of the NQO1 promoter indicated that an antioxidant responsible element (ARE)-containing region was critical for the CO-induced Nrf2-dependent increase of NQO1 gene expression in HepG2 cells. Conclusion: Our results suggest that CO-induced Nrf2 increases the expression of NQO1 which is well known to detoxify reactive metabolites and ROS.

• Journal of Information Processing Systems
• /
• 제14권3호
• /
• pp.680-693
• /
• 2018

Nowadays, third-party applications form an important part of the mobile environment, and social networking applications in particular can leave a variety of user footprints compared to other applications. Digital forensics of mobile third-party applications can provide important evidence to forensics investigators. However, most mobile operating systems are now updated on a frequent basis, and developers are constantly releasing new versions of them. For these reasons, forensic investigators experience difficulties in finding the locations and meanings of data during digital investigations. Therefore, this paper presents scenario-based methods of forensic analysis for a specific third-party social networking service application on a specific mobile device. When applied to certain third-party applications, digital forensics can provide forensic investigators with useful data for the investigation process. The main purpose of the forensic analysis proposed in the present paper is to determine whether the general use of third-party applications leaves data in the mobile internal storage of mobile devices and whether such data are meaningful for forensic purposes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 금형가공,미세가공,플라스틱가공 공동 심포지엄
• /
• pp.35-40
• /
• 2005

The demand for small and high-capacity optical data storage devices has rapidly increased. The areal density of optical disk is increased using higher numerical aperture objective lens and shorter wavelength source. A wafer-scale stacked micro objective lens with a numerical aperture of 0.85 and a focal length of 0.467mm for the 405nm blue- violet laser was designed and fabricated. A diffractive optical element (DOE) was used to compensate the spherical aberration of the objective lens. Among the various fabrication methods for micro DOE, the UV-replication process is more suitable for mass-production. In this study, an 8-stepped DOE pattern as a master was fabricated by photolithography and reactive ion etching process. A flexible mold was fabricated for improving the releasing properties and shape accuracy in UV-molding process. In the replication process, the effects of exposing time and applied pressure on the replication quality were analyzed. Finally, the shapes of master, mold and molded pattern were measured by optical scanning profiler. The deviation between the master and the molded DOE was less than 0.1um. The efficiency of the molded DOE was measured by DOE efficiency measurement system which consists of laser source, sample holder, aperture and optical power meter, and the measured value was $84.5\%$.

• 한국약용작물학회지
• /
• 제25권4호
• /
• pp.244-251
• /
• 2017

Background: The application of crop rotation systems may reduce the occurrence of soil-borne diseases by releasing allelochemicals and by subsequent microbial decomposition. Methods and Results: For reduction of ginseng root rot by the crop rotation system, after harvesting 6-year-old ginseng, fresh ginseng was grown along with continuous cultivation of sweet potato, peanut, and bellflower. Growth of 2-year-old ginseng was significantly inhibited in the continuous cultivation than in the first cultivation. Sweet potato, peanut and bellflower cultivations assisted in obtaining normal yields of ginseng in the first year after the harvest of 6-year-old ginseng. Salt concentration, potassium and sodium contents were gradually decreased, and, organic matter was gradually increased through cirp rotation. Phosphate, calcium and magnesium contents were not altered. The density of the root rot fungus was gradually decreased by the increase in crop rotation; however it was decreased distinctly in the first year compared to the second and third year. The severity of root rot disease tended to decrease gradually by the increase of crop rotation. Conclusions: Short-term crop rotation for three years promoted the growth of ginseng, however root rot infection was not inhibited significantly, although it was somewhat effective in lowering the density of the root rot pathogen.