• Title/Summary/Keyword: Releasing Temperature

Search Result 116, Processing Time 0.026 seconds

Swelling and Drug Release Characteristics of PVP Hydrogel Polymerized by $\gamma$-Irradiation Method (김마선 조사법으로 합성한 PVP하이드로겔의 팽윤과 약물방출특성)

  • 심창구;오정숙;신병철
    • YAKHAK HOEJI
    • /
    • v.37 no.5
    • /
    • pp.511-519
    • /
    • 1993
  • The short and variabke transit of drug throught GI tracj and the inter-and intra-subject variations of the transit restrict the sustained drug absorption after oral adminstration. These restrictions may be solved by retaining the dosage forms in the stomach. Then the dosage form will act as a platform which releases the drug slowly and makes the GI absorption occur for a long time. In this study, as the platforms, PVP hydrogels were synthesized by chemical and y-irradiation method in the cylindrical test tube. The chemical method means the synthesis of the hydrogel by heating the mixed solution of N-vinyl-2-pyrrolidone [monomer], acrylated albumin [crosslinking agent], 2, 2'-agobis(2-methylpropionitrile) [initiator] and proxyphylline [drug] at $65^{\circ}C$ for 5 hr. The $\gamma$-irradiation method means the synthesis of the hydrogel by irradiation with $^{60}$ Co $\gamma$-ray of the mixed solution of the monomer, acrylated albumin, and flurbiprofen [drug] at room temperature with total 0.2 Mrad for 3 hr. Our intention is to design the hydrogel tablet (diameter : 1.20 cm, thickness : 0.60 cm) which swells in the gastric fluid after oral administration to such a size that passing through the pylorus could be inhibited during the period of drug release. After releasing drug, the hydrogel should be degraded by the enzymeatic digestion in the stomach, or by hydrolysis and eventually solubilized. Thus, in votro tests were performed to examine the factors that affect swelling and drug release from the PVP hydrogels. Experimental results show that the hydrogels swell to a size larger than the diameter of the pylorus(l.3$\pm$0.7 cm) and the hydrogel prepared by the chemical method is digested by pepsin. But the hydrogel prepared by the $\gamma$-irradiation method was not digested by the pepsin and just collapsed with time. Thus, the swelling of the hydrogel synthesized by $\gamma$-irradiation was independent albumin acrylation time and pepsin concentration. But drug content and radiation dose affected the swelling and drug release kinetics of the hydrogel. Drug release from the hydrigels was prolonged up to about 24 hr. Therefore, it was concluded that by adjusting these factors, the albumin-crosslinked PVP hydrogel synthesized by $\gamma$-irradiation method is expected to be retained in the stomach for up to 60hr and be a potential platform of drugs for long-term GI absorption.

  • PDF

Calculation of non-condensable gases released in a seawater evaporating process (해수 증발과정에서의 기체방출량 계산)

  • Jeong, Kwang-Woon;Chung, Hanshik;Jeong, Hyomin;Choi, Soon-Ho
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.41 no.3
    • /
    • pp.182-190
    • /
    • 2017
  • All liquids contain a small amount of gaseous components and the amount of gases dissolved in a liquid is in accordance with Henry's Law. In a multi-stage thermal-type seawater desalination plant, as the supplied seawater undergoes variations in temperature and pressure in each evaporator, the gases dissolved in the seawater are discharged from the liquid. The discharged gases are carbon dioxide, nitrogen, oxygen, and argon, and these emitted gases are non-condensable. From the viewpoint of convective heat transfer, the evaluation of non-condensable gas released during a vacuum evaporation process is a very important design factor because the non-condensable gases degrade the performance of the cooler. Furthermore, in a thermal-type seawater desalination plant, most evaporators operate under vacuum, which maintained through vacuum system such as a steam ejector or a vacuum pump. Therefore, for the proper design of a vacuum system, estimating the non-condensable gases released from seawater is highly crucial. In the study, non-condensable gases released in a thermal-type seawater desalination plant were calculated quantitatively. The calculation results showed that the NCG releasing rate decreased as the stage comes getting a downstream and it was proportional to the freshwater production rate.

Physico-chemical properties and biological activity of controlled-release granular formulations for the herbicide dicamba (방출조절형 dicamba 입제의 물리화학성 및 생물효과)

  • Oh, Kyeong-Seok;Oh, Byung-Youl;Park, Seung-Soon;Lee, Jae-Koo
    • The Korean Journal of Pesticide Science
    • /
    • v.3 no.1
    • /
    • pp.37-45
    • /
    • 1999
  • Dicamba (3,6-dichloro-o-anisic acid) granular formulations for controlled release (DGFCRs) were prepared with biodegradable polymers, corn starch and pregelatinized starch, to minimize harmful side effects, extend weed control performance, and control the releasing rate of the active ingredient. Physico-chemical properties and biological activity of DGFCRs were studied. Six different granules were formulated by applying two processes, granulation and extrusion. Formulation efficiencies of active ingredient (A.I.) in the granules prepared by granulating and extruding were $90.0{\sim}96.3%$. Incorporation ratios of A.I. in the granules prepared by granulating and extruding showed $89.5{\sim}94.5%$ and $46.7{\sim}82.0%$, respectively. The highest swellability was DG-2 formulation prepared with corn starch. Whereas, the lowest floatability in water was DG-2 formulation, while the highest one was DG-1 formulation prepared with pregelatinized starch, Miragel 463. The degradation rates of dicamba in the granules under the elevated temperature of $50^{\circ}C$ were less than 5% for DG-1 and DG-2 formulations even after 90 days, meanwhile, those of DE-1 formulations prepared with pregelatinized starch, Mirasperse, were more than 5%. The release rates of A.I. from the granules into water under a static condition were about 100% after 2 weeks. Weeding effects of the granules on broad leaf weeds tested in greenhouse were more than 90% after 30 days.

  • PDF

Preparation and Characterizatino of Nano-sized Liposome Containing Proteins Derived from Coptidis rhizoma (황련유래 단백질이 함유된 나노리포좀의 제조 및 특성)

  • Oh, Seng Ryong;Lee, Sang Bong;Cho, Kye Min;Choi, Moon Jae;Jin, Byung Suk;Han, Yong Moon;Lee, Young Moo;Shim, Jin Kie
    • Applied Chemistry for Engineering
    • /
    • v.17 no.1
    • /
    • pp.52-57
    • /
    • 2006
  • Coptidis Rhizoma, an antimicrobial agent from natural source, is known to have the antiviral effect on the Candida albicans that causes the infectious dermatitis. The valuable protein was extracted from the Coptidis Rhizoma, To prevent denaturalization from external stimulus and improve adsorption onto the skin, the nano-sized liposomes were prepared as a carrier. The CPR-containing liposomes showed an average diameter of 187 nm, surface charge of 3.337 mV and 33% encapsulation efficiency. The release behavior of CRP from the liposome was investigated with various temperature and releasing time. The PVA solution was coated on the surface of liposome to improve the stability. The coated liposome showed slow release behavior in comparison with the non-coated liposome. The CRP in the liposome maintained the effect on the Candida albicans after treating it at 50 and with ultraviolet for 24 h.

Study on the control technique for the heat transportation system using metal hydride (수소저장합금을 이용한 열수송시스템 제어기술 연구)

  • Sim, K.S.;Kim, J.W.;Kim, J.D.;Myung, K.S.
    • Transactions of the Korean hydrogen and new energy society
    • /
    • v.11 no.1
    • /
    • pp.43-49
    • /
    • 2000
  • The heat transportation from a complex of industry to a rural area needs more efficient method because the distance between them is usually more than 10km. Conventional heat transportation using steam or hot water via pipe line has limits in transportation distance (about 3~5 km) because of the heat loss and frictional loss in the pipe line. Metal hydride can absorb or discharge hydrogen through exothermic or endothermic reaction. After releasing hydrogen from metal hydride by means of the waste heat from industry, we can transport this hydrogen to urban area via pipe line. In urban areas, other metal alloy reacts with this hydrogen to form metal hydride and produces heat for heating. Cool heat is also obtained if it is possible to use metal hydride with low reaction temperature. Therefore, metal hydride can be used as a media for transportation and storage of heat. $MmNi_{4.5}Al_{0.5}Zr_{0.003}$, $LaNi_5$, $Zr_{0.9}Ti_{0.1}Cr_{0.6}Fe_{1.4}$, $MmNi_{4.7}Al_{0.1}Fe_{0.1}V_{0.1}$ alloys were selected for this purpose and the properties of those metal hydrides were discussed. The design and control techniques were proposed and discussed for this heat transportation system using metal hydride.

  • PDF

Maturity and Spawning of Korean Mandarin Fish, Siniperca scherzeri in Soyangho Lake (소양호에 서식하는 쏘가리 Siniperca scherzeri의 성숙과 산란 특성)

  • Shin, Ari;Park, Heewon;Lee, Wan-Ok;Song, Mi-Young
    • Korean Journal of Ichthyology
    • /
    • v.30 no.2
    • /
    • pp.84-91
    • /
    • 2018
  • The study about maturity and spawning of Korean Mandarin fish, Siniperca scherzeri collected using the set net and gill net in Soyangho Lake from April to November 2014 was conducted. The number of individuals was 401 (female: 204, male: 197). The total length of females ranged from 113 mm to 365 mm and that of males was from 140 mm to 342 mm. The water temperature in May which is the start of spawning season indicated about $15^{\circ}C$ and gradually increased to July ($26^{\circ}C$). Gonadosomatic index (GSI) of females indicated 2.3%, 4.6% and 3.1%, respectively, in May to July. Males' value showed the similar pattern recording 8.0%, 6.6% and 4.5% in the same time. According to histological observations of gonadal tissue, the most of female in May had the gonadal tissue of maturing and mature stage. And the ovary of June was mostly in the stage of ripe and spawning and a number of individuals in July was recovery stage. In the case of male, a number of males in May showed in the stage of mature. The testis of June showed that mature sperm was releasing. And the testis of July was mostly in recovery stage. The total length at 50% group maturity was estimated 245.16 mm. As shown in the above, the main spawning period of S. scherzeri was May to June.

A Novel Acid-Stable Endo-Polygalacturonase from Penicillium oxalicum CZ1028: Purification, Characterization, and Application in the Beverage Industry

  • Cheng, Zhong;Chen, Dong;Lu, Bo;Wei, Yutuo;Xian, Liang;Li, Yi;Luo, Zhenzhen;Huang, Ribo
    • Journal of Microbiology and Biotechnology
    • /
    • v.26 no.6
    • /
    • pp.989-998
    • /
    • 2016
  • Acidic endo-polygalacturonases are the major part of pectinase preparations and extensively applied in the clarification of fruits juice, vegetables extracts, and wines. However, most of the reported fungal endo-polygalacturonases are active and stable under narrow pH range and low temperatures. In this study, an acidic endo-polygalacturonase (EPG4) was purified and characterized from a mutant strain of Penicillium oxalicum. The N-terminal amino acid sequence of EPG4 (ATTCTFSGSNGAASASKSQT) was different from those of reported endo-polygalacturonases. EPG4 displayed optimal pH and temperature at 5.0 and 60-70℃ towards polygalacturonic acid (PGA), respectively, and was notably stable at pH 2.2-7.0. When tested against pectins, EPG4 showed enzyme activity over a broad acidic pH range (>15.0% activity at pH 2.2-6.0 towards citrus pectin; and >26.6% activity at pH 2.2-7.0 towards apple pectin). The Km and Vmax values were determined as 1.27 mg/ml and 5,504.6 U/mg, respectively. The enzyme hydrolyzed PGA in endo-manner, releasing oligo-galacturonates from PGA, as determined by TLC. Addition of EPG4 (3.6 U/ml) significantly reduced the viscosity (by 42.4%) and increased the light transmittance (by 29.5%) of the papaya pulp, and increased the recovery (by 24.4%) of the papaya extraction. All of these properties make the enzyme a potential application in the beverage industry.

Experimental validations of fire-resistant materials for protecting LPG small storage tank from building fires (건물 화재 시 LPG소형저장탱크 보호용 화재 저항 재료 성능 실증)

  • Kim, Seung-Hwan;Kim, Kyung-Sik;Heo, Seung-Geon;Lee, Jae-Hun
    • Journal of the Korean Institute of Gas
    • /
    • v.24 no.4
    • /
    • pp.18-24
    • /
    • 2020
  • The purpose of this study is to validate thermal hinderance effects, i.e., feasibilities, of fire-proof structure for LPG tank exposed to fire from adjacent burning building. The panel materials suggested for the fire-proof structure are (1) 10 mm-thick wood, (2) wood with fireproof coating, (3) 75 mm-thick Expanded Polystyrene, (4) 75 mm-thick glass wool filled sandwich panel, and (5) 75 mm-thick autoclaved lightweight concrete. The square planar fire source of 1 ㎡, a matrix of nozzles releasing 120-140 g/s of LPG, is used to heat up the wall and the tank beyond, mimicking heat transfer from burning exterior wall finishes. The feasibility is tested by inspecting structural integrity after test, and then by examining temperatures at both sides of panels and tank's front surface as well as heat fluxes. As a result, it can be concluded that, among the suggested sample materials, fire-proof wall with ALC panel only showed the feasibility for explosion prevention with the proven evidences of structural integrity and least increase in temperature of tank.

A study on Actinosporeans parasitized in Branchiura sowerbyi (Oligochaeta : Annelida) (아가미지렁이 (Branchiura sowerbyi)에 기생하는 포자충류에 관한 연구)

  • Kim, Young-Gill
    • Journal of fish pathology
    • /
    • v.8 no.1
    • /
    • pp.13-21
    • /
    • 1995
  • Four species of Actinosporeans, Aurantiactinomyxon sp. A, B, C and Neoctinomyxon sp. D were released from Oligochaete, Branchiura sowerbyi captured from three reserviors, where intestinal giant-cystic disease in carp had occured from June to September, 1994. All part of the intestinal epithelial tissue from the gullet to the anus of B. sowerbyi were infected by Actino-sporeans, and many mature Actinosporean were seen more easily at the posterior parts of the body. Just before releasing, mature Actinosporean sporozoites were divied into each individual from the intestinal epithelial tissue of Oligochaete, while immature ones had 6 spores ($20{\times}25{\mu}m$ in size) per each in the oocyst ($60{\times}65{\mu}m$ in size). A total of 1, 762 of B. sowerbyi were investigated in three reservoirs, 86 individuals (4.88%) of them were infected; 0. 74% (13 ind.) of Aurantiactinomyxon sp. A, 2. 27% (40 ind.) of Aurantiactinomyxon sp. B, 1. 59% (28 ind.) of Aurantiactinomyxon sp. C, and 0. 28% (5 ind.) of Neoactinomyxon sp. D. At the room temperature of 22.6-$30.7^{\circ}C$, number of extrusion dates of Actinosporeans from B. sowerbyi for 32 days are 1 day (23.3% of total, 1 time) or 5 days (11.7%. 5 times), and the majority was finished within 15 days, however, 6.7% of total were released for 32 days.

  • PDF

Early Sexual Maturation Through Temperature Stimulation and Development of Patinopecten yessoensis (큰가리비 (Patinopecten yessoensis)의 수온 자극에 의한 조기 성성숙 유도와 발생)

  • Kim, Young Dae;Lee, Chu;Min, Byung Hwa;Kim, MeeKyung;Kim, Gi Seung;Choi, Jae-Suk;An, Won Gun;Nam, Myung-Mo
    • The Korean Journal of Malacology
    • /
    • v.30 no.4
    • /
    • pp.311-319
    • /
    • 2014
  • Early sexual maturation through temperature stimulation was induced in female and male of yezo scallop. Gonadosomatic index (GSI) in female showed $9.12{\pm}2.9$ in January, $14.89{\pm}2.9$ in February and $21.3{\pm}1.4$ in March in experiment I. GSI in experiment I showed a significant increase (P < 0.05) and in experiments II and III were not show significant variations (P > 0.05). It also showed significant between the control and the experiments I, II, and III in February (P < 0.05) measurements. Experiment I has showed good results in sexual maturation and spawning when compared with other experiments II and III and the control. Histological observation showed that ovary condition was in a growing stage in all the experiments I, II, and III. In February, ovary condition through histological observation was a late mature stage in all the experiments I, II, and III except the control of a growing stage. GSI and gonad weight were $4.4{\pm}0.88$ and 2.8 g, respectively in November whereas it was $15.1{\pm}2.8$, and 11.7 g, respectively in January and $21.7{\pm}5.4$, and 19.4 g, respectively in February after rearing at a water bath of $12^{\circ}C$ depending on the condition of experiment I. It was possible early releasing of eggs and sperms of yezo scallop in February instead of the middle of April to the end of May being spawning period. Fertilized eggs have become a gastrula stage through a spiral cleavage and then become a trochophore larvae after 36 hours. After 10 days, D-shaped larvae have changed into an umbo stage larvae and attached to juveniles in the post larvae after 20-23 days.