• 한국패류학회지
• /
• 제21권1호
• /
• pp.13-17
• /
• 2005

In this study, the influence of water temperature and salinity on sand ejection of Manila clams, Ruditapes philippinarum, was investigated. The result showed that, under different water temperature, the highest quantity of sand ejection was at $20^{\circ}C$, the value of which was 0.091 g, while the smallest one was only 0.058 g at 0$^{\circ}C$. The highest releasing rate, 95.79%, could be seen in $20^{\circ}C$ group, while $0^{\circ}C$ group was the lowest one, 85.29%. Under different salinity, 30 psu group had the highest value, 0.057 g, and 0 psu (freshwater) group was the lowest one, only 0.026 g. At the same time, the highest releasing rate appeared at 25 psu, which was 90%. 0 psu group was the lowest one in releasing rate, 60.47%. According to these results, we recommend that the clams should be placed into the clear seawater with about 25 psu of salinity at near $20^{\circ}C$ to let the clams perform the self-depuration. Better quality of clams containing less impurity in the aquaculture and commerce could be obtained from this pre-treatment.

• 방사선산업학회지
• /
• 제7권2_3호
• /
• pp.171-176
• /
• 2013

In previous study, the novel nanosized curdlan-silica complex for a sustain-releasing effect was developed by using gamma-irradiation. It can be applicable to use in various sustainr-eleasing formulation in agriculture industry. This study was conducted to investigate its storage stability and environmental toxicity in an accelerated condition. The complex samples were treated with high temperature condition ($65^{\circ}C$) during 3 weeks, and then sustain-releasing property of complex was verified thereby using Ion Chromatography on a weekly basis. The morphology of the complex was characterized using scanning electron microscopy (SEM). Results of Ion Chromatography analysis showed that sample treated for 3 weeks was similar to sustain-releasing pattern of non-treatment sample. We verify concluded that the complex is able to keep its sustain-releasing property and sustained-releasing in 3 years. Also the formulation has no environmental toxicity.

• 한국환경농학회지
• /
• 제40권1호
• /
• pp.1-12
• /
• 2021

BACKGROUND: G protein-coupled receptors (GPCRs) are widely distributed in various organisms. Insect GPCRs shown as in vertebrate GPCRs are membrane receptors that coordinate or involve in various physiological processes such as learning/memory, development, locomotion, circadian rhythm, reproduction, etc. This study aimed to identify GPCRs expressed in fat body and compare the expression pattern of GPCRs in different temperature conditions. METHODS AND RESULTS: To identify GPCRs genes and compare their expression in different temperature conditions, total RNAs of fat body in Plutella xylostella larva were extracted and the transcriptomes have been analyzed via next generation sequencing method. From the fat body transcriptomes, genes that belong to GPCR Family A, B, and F were identified such as opsin, gonadotropin-releasing hormone receptor, neuropeptide F (NPF) receptor, muthuselah (Mth), diuretic hormone receptor, frizzled, etc. Under low temperature, expressions of GPCRs such as C-C chemokine receptor (CCR), opsin, prolactin-releasing peptide receptor, substance K receptor, Mth-like receptor, diuretic hormone receptor, frizzled and stan were higher than those at 25℃. They are involved in immunity, feeding, movement, odorant recognition, diuresis, and development. In contrast to the control (25℃), at high temperature GPCRs including CCR, gonadotropin-releasing hormone receptor, moody, NPF receptor, neuropeptide B1 receptor, frizzled and stan revealed higher expression whose biological functions are related to immunity, blood-brain barrier formation, feeding, learning, and reproduction. CONCLUSION: Transcriptome of fat body can provide understanding the pools of GPCRs. Identifications of fat body GPCRs may contribute to develop new targets for the control of insect pests.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.602-613
• /
• 2015

As one of the mission payloads to be verified through the cube satellite mission of Cube Laboratory for Space Technology Experimental Project (STEP Cube Lab), we developed a hinge driving separation nut-type holding and releasing mechanism. The mechanism offers advantages, such as a large holding capacity and negligible induced shock, although its activation principle is based on a nylon cable cutting mechanism triggered by a nichrome burn wire generally used for cube satellite applications for the purpose of holding and releasing onboard appendages owing to its simplicity and low cost. The basic characteristics of the mechanism have been measured through a release function test, static load test under qualification temperature limits, and shock measurement test. In addition, the structural safety and operational functionality of the mechanism module under launch and on-orbit environments have been successfully demonstrated through a vibration test and thermal vacuum test.

• 한국수산과학회지
• /
• 제36권4호
• /
• pp.365-371
• /
• 2003

The reared fries of black sea bream, Acanthopagrus schlegeli were released in Gamak Bay and initial adaptation to the environment was evaluated. Thirty thousand fries were marked with magnetic tag, released and recaptured and its stomach content were analysed; the neighboring zooplankton, beuthic algae and other young fishes were investigated. The fries were released on July 30, 2001 in summer season. Water temperature of surface and bottom were $24^{\circ}C\;and\;21^{\circ}C,$ respectively. $Chlorophyll\;\alpha$ content was 4.5 ${\mu}g/L$ with high primary production. Salinity was $32.0-32.5\%_{\circ}.$ Water depth of releasing site was about 30 m. The sea jungle was formed at the first point of releasing and it kept the fries for about 3 days in the bay with plenty of food organisms within 5 m depth. Stomach analysis of the fries revealed that real feeding started from the 15 days after releasing and full feeding took place after the tenth day.

• 대한화학회지
• /
• 제56권4호
• /
• pp.473-477
• /
• 2012

The novel chitosan-based thermosensitive hydrogels were prepared as control-releasing drug carriers. N-carboxyethyl chitosan (ACS) was synthesized by microwave heating for 1 h through Michael addition of CS to acrylic acid in a grafting yield of 52.97%, which was proved to be a faster and more efficient way than ordinary methods. 5-Fu was modified with formaldehyde to synthesize N,N'-Bis(hydroxymethyl)-5-fluorouracil (5-Fu-OH). Then an esterification was performed using ACS and 5-Fu-OH to give 5-Fu-ACS. The new thermosensitive hydrogels were prepared by adding sodium glycerophosphate to the solution of compounds under a certain constant temperature. Simultaneously, the hydrogels' swelling rate, in vitro drug release rate and thermosensitive were studied, and found that the 5-Fu-ACS composite hydrogel had more excellent releasing effect, higher drug loading and better thermosensitive.

• 대한의용생체공학회:의공학회지
• /
• 제14권3호
• /
• pp.283-290
• /
• 1993

In thls study, the effects of the composltional change of cast Ni-Ti alloys on its characteristics including mechanical properties, phase transformation temperature, and ion releasing rate were investigated. brittle:behavior was shown in the stress-strain curve of the alloy containing low Ti content (Ni-44.0%Ti). By increasing the Ti content, the trend in stress-strain curves changed from that of superelasticity to that of shape memory effect(Ni-44.4%Ti, Ni-45.1%Ti, Ni-45, 5%Ti). Phase transformation temperature ($A_f, {\;}M_5$ point) increased with increasing the Ti content. lon releasing rate of four types of Mi-Ti alloys was very low compared to that of the dental commerical Ni-Cr alloy.

• 한국작물학회지
• /
• 제65권4호
• /
• pp.477-484
• /
• 2020

This study was conducted to investigate the effects of slow-releasing fertilizer and sowing date on waxy corn propagated through double cropping without tillage. "Mibaek 2" was sown for first cropping on March 25^th, April 5^th, and April 15^th, and for second cropping on July 5^th, July 15^th, and July 25^th in 2018-2019. In order to save labor, slow-releasing fertilizer was utilized only one time before sowing. The accumulated temperature from sowing to silking was about 590-700℃. It took 65-77 days when "Mibaek 2" was sown in early April, but the one sown in early July took 42-52 days. In the first cropping, the culm length and ear length caused by the sowing date had no statistical significance, but the kernel set length was the highest at 123 cm in the sowing district on April 5^th. The weight of marketable ears was the highest at 100%, in addition to soil testing-based recommended fertilization. Meanwhile, in the second cropping, culm length, ear length, and yield were less compared to the first cropping. The culm length, kernel set length, ear length, and seed set length decreased as sowing date was delayed. The number and yield of marketable ears were the highest at 100%, in addition to soil testing-based recommended fertilization like in the first cropping. It has been found that securing yield by July 15^th to finish the second seeding of the crop in the central part of Korea is advantageous. These results of this study will be helpful to farmers for the double cropping of waxy corn cultivation and management.

• 한국토양비료학회지
• /
• 제40권5호
• /
• pp.377-382
• /
• 2007

완효성을 부여하려는 물질의 외부에 광물입자를 이용하여 피복형 구조체를 제조하고 이의 방출조절능력을 카리비료에 대한 용출실험을 통해 평가하였다. 황산칼륨을 구형의 펠릿으로 제조하고 이의 표면에 평균입도 $13.0{\mu}m$와 $27.4{\mu}m$인 두 가지 장석분말을 이용하여 구조체를 제조하였다. 구조체의 두께와 소성하는 온도를 달리하여 펠릿을 제조하고 용출실험을 통해 구조체의 완효성 발현능력을 평가하였다. 칼륨의 용출은 burst effect효과가 커서 초기 용출율이 높았는데, 소성온도가 낮고 구조체가 얇은 시료에서 크게 나타났다. $1{\sim}55{\mu}m$의 입도를 갖는 장석 보다 $1{\sim}130{\mu}m$의 입도를 갖는 장석에 의한 구조체가 더 높은 충진율에 의해 용출속도를 늦출 수 있었다. 용출속도는 약 7일부터 정상상태의 용출속도를 보이기 시작하였고 용출패턴은 펠릿에 남아있는 칼륨의 농도에 비례하는 first order kinetic의 패턴을 나타내었다. 평균입도 $27.4{\mu}m$인 장석으로 1~2.6mm두께의 피복형 구조체를 만들어 $1050^{\circ}C$에서 소성한 팰릿의 경우에는 40일의 용출율이 약 43%를 나타내었다.

• Ocean and Polar Research
• /
• 제40권2호
• /
• pp.69-75
• /
• 2018

We investigated the effects of environmental variations on the growth and survival rate of Stichopus japonicus to determine the optimum environmental conditions for its growth. Literature studies and a 12 month-long diver survey were carried out to understand the habitat, ecology and size of the surveyed area. Based on the collected data, we suggested optimum habitat conditions for releasing S. japonicus. Experiments on releasing S. japonicus were conducted in the breakwater of the Hwagye fishing cooperative in Hwagey-ri, Namhae-un, Gyeongsangnam-do, Korea. To implement the experiments, we divided the surveyed area into 4 sub-areas with different characteristics: (1) sand and silt zone; (2) artificial sea cucumber bank zone; (3) artificial rock bank zone; and (4) marine algae zone. The experiment lasted for 12 months. We released 32,000 sea cucumbers over $120m^2$ of each of the sand and silt zone, artificial rock bank zone and marine algae zone and released 6,000 sea cucumbers over $120m^2$ of the artificial sea cucumber bank zone. The average density of the released sea cucumbers from day 30 to day 360 after the releasing was conducted was the highest in the artificial sea cucumber bank zone ($23.7animal/m^2$), which was followed by artificial rock bank zone ($2.0animal/m^2$), marine algae zone ($1.9animal/m^2$) and sand and silt zone ($0.8animal/m^2$). The analysis on growth showed that the initial average weight of 2.3 g increased on day 360 after the releasing to 12.5 g in the artificial sea cucumber rank zone, 20.2 g in the sand and silt zone, 23.3 g in the artificial rock bank zone and 22.9 g in the marine algae zone. Results from the experiment along with the literature analysis suggest the following optimum habitat conditions: $10-15^{\circ}C$ water temperature; 28-34 psu salinity; 5-10 m water depth; 0.2-0.5 m/s velocity; rock, stone and muddy sand as substrate; and less than 20% mud in the substrate.