• 분석과학
• /
• 제8권4호
• /
• pp.731-738
• /
• 1995

Toxic air pollutants are investigated in a petrochemical industrial park in Taiwan by using a movable open path FTIR. The results show the qualitative and quantitative analysis of emission gases from plants, and also provide the emission rate of different compounds. More than twenty compounds under usual operation are found from this industrial park. The concentration variation with time can be correlated exactly with wind direction. It means that by changing the measuring points, the source of emission can be unambiguously identified. An EPA proved PAL model is applied to estimate the emission rate of either a point or an area source. Local atmospheric stability is determined by releasing the $SF_6$ tracer. The origins of errors come mainly from the uncertainty of source's configuration and the variation of meteorological condition. Through the continuous measurement (half an hour base in this study) of OP-FTIR sensor, the maximum value of emission rate and the annual amount of emission can be derived. The emission rate of the measured toxic gases are derived by the model technique and the results show that the emission amount are in the order of ten to hundred tons per year.

• 대한치과의사협회지
• /
• 제51권3호
• /
• pp.138-147
• /
• 2013

Orthodontic tooth movement is a unique process which tooth, solid material is moving into hard tissue, bone. Orthodontic force in general provides the strain to the PDL and alveolar bone, which in turn generates the interstitial fluid flow(in detail, fluid flow in PDL and canaliculi). As a results of matrix strain, periodontal ligament cells and bone cells are deformed, releasing variety of cytokines, chemokines, and growth factors. These molecules lead to the orthodontic tooth movement(OTM). In these inflammation and tissue remodeling sites, all of the cells could closely communicate with one another, flowing the information for tissue remodeling. To accelerate the rate of OTM in future, local injection of single growth factor(GF) or a combination of multiple GFs in the periodontal tissues might intervene to stimulate the rate of OTM. Corticotomy is effective and safe to accelerate OTM.

• Asian-Australasian Journal of Animal Sciences
• /
• 제13권2호
• /
• pp.236-243
• /
• 2000

A number of developments have occurred over recent years that are being used commercially or have the potential to increase the milk yield and consequently the efficiency of dairy cows. Bovine growth hormone is the most widely known of several attempts that have been made to alter the metabolic endocrinology of dairy cows to increase the rate of milk secretion. The factors affecting the milk yield response to growth hormone, growth hormone-releasing factor, thyroxine and placental lactogen as well as to the immuno-neutralization of somatostatin are briefly considered. Secondly, the recent greater understanding of the mechanism by which the milk yield is increased following more frequent milking, which has resulted from the identification and characterization of the feedback inhibitor of lactation (FIL) protein, is reviewed. The identification of this protein provides new avenues of research which may lead to a reduction in the rate of decline in milk yield with advancing lactation or to undiminished milk yields despite a reduction in frequency with which the animals are milked.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권12호
• /
• pp.1794-1802
• /
• 2001

Biotechnology will play critical role in improving animal productivity. Animal growth rate and muscle deposition potential can be greatly improved by the application of biotechnology and biotechnological products. Administration of recombinant somatotropin (ST) or other compounds such as IGF-1 and growth hormone-releasing peptides (GHRPs) can enhance growth rate and carcass lean percentage. Gene transfer offers a powerful approach to manipulate endocrine system and metabolic pathways toward faster growth and better feed efficiency. Biotechnology is also extensively used for improving metabolism and activity of gut microorganisms for better nutrient digestibility. Knockout of growth-inhibiting genes such as myostatin results in considerable acceleration of body weight and muscle growth. Animal growth can also be improved by the use of gene therapy. Immunomodulation is another approach for efficient growth through controlling the activity of endogenous anabolic hormones. All the above aspects will be discussed in this review.

• Journal of Pharmaceutical Investigation
• /
• 제23권4호
• /
• pp.207-211
• /
• 1993

Reservoir type devices were designed for long-term implantable drug delivery system. The reservoir type device was prepared with the polymethacrylic acid gel coated with polyurethane membrane. Release controlling agent (RCA) were employed to control drug release from devices via generation of micropores in the membranes. The polyurethane membrane functioned as a rate controlling barrier. The drug release pattern of hydrogel demonstrated zero order kinetics. The release rate of drugs could be regulated by varying hydrophobicity/hydrophilicity and content of the RCA, as well as the thickness of the polyurethane membrane. The release of drugs from this system was governed by pore mechanism via simple diffusion and osmotic pressure.

• Toxicological Research
• /
• 제9권1호
• /
• pp.45-60
• /
• 1993

The present study was carried out to evaluate the cytotoxicity of cadmium on cultured rat fibroblasts. The colorimetric assays of neutral red and tetrazolium MTT, the lactatedehydrogenase activity, the amounts of total protein, the rate of DNA synthesis, the amounts of unscheduled DNA synthesis, the frequency of sister chromatid exchange, the releasing rate of intracellular calcium, and light and electron microscopic studies were performed on cultured rat fibroblasts maintained in the media containing various concentrations of cadmium. The results were as follows: The neutral red(NR) and MTT values were decreased dose-dependently by cadmium, and the NR90, NR50, MTT90 and MTT50 values of cadmium were 0.2mM, 21.5mM, 1.0Mm and 60.0Mm, respectively.

• Clinical and Experimental Reproductive Medicine
• /
• 제37권3호
• /
• pp.253-259
• /
• 2010

목 적: 과배란유도 환자에서의 우성난포의 성장속도와 임상인자들과의 연관성을 평가하고자 하였다. 연구방법: 체외수정시술을 위한 과배란유도 313주기를 대상으로 혈중 호르몬 농도를 측정하고 과배란유도 주기 중 난포 직경의 변화를 초음파를 이용하여 연속적으로 측정하였다. 우성난포의 성장 속도를 계산하고, 임상지표와의 연관성을 분석하였다. 결 과: Gonadotropin releasing hormone 작용제와 길항제 주기 사이에 우성난포의 성장속도의 유의한 차이는 관찰되지 아니하였다. 우성난포의 성장속도와 환자의 연령, 체질량 지수, 생리 시작 3일의 follicle stimulating hormone, luteinizing hormone, 에스트라디올, 획득 난자의 수, 수정률 등의 임상지표는 유의한 연관성이 없었다. 결 론: 본 연구 결과는 우성난포의 성장속도는 난소 반응을 포함한 임상지표와 연관성이 없는 독립적인 변수임을 시사한다.

• 한국작물학회지
• /
• 제58권1호
• /
• pp.8-14
• /
• 2013

벼 재배시 본답의 기비와 분얼비를 대체하여 묘판에 1회 시비하는 용출제어형 입상배합(Bulk Blending) 피복비료를 시용 후 벼 생육과 수량, 품질, 경제성 등 완효성비료의 처리효과를 검토한 결과는 다음과 같다. 1. 개발된 육묘상비료의 T-N용출량은 온도가 높을수록 빨라졌고 온도에 관계 없이 분얼비 시용 시점인 14일경부터 높아져 21일경 최고에 달했다. 2. 이앙 후 60일에서 질소흡수이용율은 표준시비 28.6%에 비하여 개발된 육묘상 비료가 높았으며 200 g시비구에서 73.1%, 300 g시비구에서 66.1%로 나타났다. 3. 생육단계별(최고분얼기, 유슈형성기 등) 초장, 경수, SPAD값 생육상황은 개발된 육묘상비료 300 g/상자 시비에서 표준과 대등하였다. 4. 성숙기에도 간장, 수장, 단위면적당 수수는 개발된 육묘상비료 300 g/상자 이상 시비구에서 표준과 같거나 많았다. 5. 10a당 백미수량은 개발된 육묘상비료 시용량이 많을수록 증가하였다. 시비량별로 보면 표준시비 528 kg 대비 개발된 육묘상 비료 300 g/상자 이상 시비구에서 525~552 kg으로 대등하거나 많았다. 6. 백미 품질은 개발된 육묘상비료 시용량이 많을 수록 단백질함량은 증가하였으며 완전미율, 아밀로스함량, 백도, 투명도는 비료량이 적을수록 증가하는 경향이었다. 7. 따라서 표준시비량 이상의 수량과 품질 및 경제적인 측면을 고려한 개발된 육묘상 비료의 적정 시비량은 300 g/상자(실비. 9 kg/10 a)이었다. 8. 시비량은 육묘상비료가 표준시비에 비해 49.3% 절감되었고, 시비노동력도 49.2% 절감되었다.

• Fisheries and Aquatic Sciences
• /
• 제9권2호
• /
• pp.75-82
• /
• 2006

We evaluated the utility of applying isozyme analysis and two tagging methods, visible implant fluorescent elastomer (VIE) injection and uropod-cutting, to monitor the effects of releasing nursery-reared fleshy prawn (Fenneropenaeus chinensis) into natural habitat in Korea. One hundred thousand farmed prawns (70 mm long) were tagged by clipping off the outer left uropod and injecting them with VIE. This marked seed population was released at Muchangpo, Korea, on 11 and 19 July 2002. Two months later, total catch and catch per unit effort (CPUE) at three locations (Hongwon, Muchangpo, and Anmyundo) were determined. Total catch and CPUE increased nearly 18% over the previous year in Hongwon and Muchangpo. The mixing rate, estimated by uropod regeneration pattern, was 0.33% at Hongwon, 0.53% at Muchangpo, and 0.21% at Anmyundo. The recapture rate was about 3.5%. Isozyme analysis confirmed that the mixing rate was highest at Muchangpo. Moreover, fleshy prawns from Muchangpo were genetically most related to the seed population, indicating that the released prawns had largely remained near the released site. We also confirmed that isozyme genes are valuable as genetic markers for qualitative analyses of a released seed population.

• 한국수산과학회지
• /
• 제42권1호
• /
• pp.63-67
• /
• 2009

The effects of adhesive substrates and bottom materials on the release of fertilized eggs by the Pacific cod, (Gadus macrocephalus) were examined to find an effective release method. Palm twin as an adhesive substrate displayed a significantly elevated adhesive rate compared to gulf weed. However, the survival rate of the fertilized eggs attached to palm twin was as low as 17.5% 8 days after fertilization (DAF). In contrast, fertilized eggs in the absence of adhesive substrate displayed the highest survival rate (47.0%). Concerning bottom materials, the survival rate of fertilized eggs on sand was significantly high (approximately 51.1%) on 8 and 9 DAF. The observations indicates that adhesive substrates are not needed and spawning ground bottom materials such as sand or mud should be considered when releasing fertilized eggs of Pacific cod.