• Asian Journal of Turfgrass Science
• /
• v.21 no.2
• /
• pp.177-182
• /
• 2007

When a football field is constructed using sand medium, the fertilizer management has to be adjusted because of the low nutrient holding capacity and higher leaching rate. The objective of this study was to test the effects of slow release fertilizers on Kentucky bluegrass (Poa pratensis L.) growth in simulated sport field rootzones with PVC pipe pots. Data of turfgrass color, uniformity, growth rate, biomass above ground, and the nitrate content in the leaching solution was collected at different growing stages and during four simulated rain fall periods. The result showed that the nutrient release rate of urea was the highest and that of controlled release nitrogen fertilizer was the lowest. Effects of the controlled release nitrogen fertilizer lasted 14 days more than other lawn fertilizers and 28 days longer than regular urea with acceptable quality levels of turf. The slow release fertilizer also restrained excessive growth of the grass, reduced the times of mowing. Slow release fertilizer used in this study reduced $NO_3$-N leaching by almost 50% at the beginning of turf establishment.

• Fire Science and Engineering
• /
• v.20 no.2 s.62
• /
• pp.14-20
• /
• 2006

The aim of this study is to predict the ignition times and the HRR(heat release rate) for building interior materials. By using the literature data and RSM(response surface methodology), the new equations for predicting the ignition time and the HRR of building interior materials are proposed. The A.A.P.E.(average absolute percent error) and the A.A.D.(average absolute deviation) of the reported and the calculated ignition times by means of the thickness and the density were 4.35 sec and 1.57 sec, and the correlation coefficient was 0.987. The correlation coefficient of the reported and the calculated the net HRR by means of burner width and power was 0.983. Also the correlation coefficient of the reported and the calculated the total HHR by means of burner width and power was 0.999. The correlation coefficient of the reported and the calculated the maximum flame height by means of burner width and power was 0.999. The values calculated by the proposed equations were in good agreement with the literature data.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.111-119
• /
• 2011

This study was designed to provide basic data applicable to fire investigation through consideration of combustion products and propose vulnerability of combustibles through analysis of $CO_2$ emission. In order to achieve these research objectives, characteristics of combustion products such as smoke release rate of each part(raw leaves, branches and barks), $CO_2$ emission and ash production were considered targeting on 6 oak species(Quercus variabilis Blume, Quercus aliena Blume, Quercus serrata, Quercus mongolica Fisch, Quercus dentata Sapling and Quercus acutissima) using cone calorimeter and smoke density tester. As a result, it was found that raw leaves release smoke more relatively than branches and barks, when they burn, and that Quercus variabilis Blume has the highest smoke density. Also, Quercus acutissima released CO and $CO_2$ which are respectively, 6.67 times and 1.43 times more than Quercus variabilis Blume with low $CO_2$ emission. In addition, branches released CO and $CO_2$ more relatively. There was a big difference in ash production among raw leaves(3.1 g), branches(10.5 g) and barks(16.43 g). It was identified that Quercus serrata produces ashes which are nearly 9.95 times more than Quercus variabilis Blume. It demonstrates that Quercus serrata contains relatively higher minerals and that Quercus variabilis Blume can leave lots of traces like stain and carbonization, as it releases smoke a lot and it's difficult to predict visibility, when a forest fire breaks out in its community area. It is also considered that smoke particles containing oil in the air leave strain on the surface of a tree, and that CO and $CO_2$ emission increases, when crown fire to burn branches breaks out.

• Korean Journal of Hydrosciences
• /
• v.4
• /
• pp.11-19
• /
• 1993

The peak flood discharge at a downstream station and the flood travel time between a pair of dams due to a specific flood release from the upper reservoir are computed using a hydraulic river channel routing method. The study covered the whole large reservoir system in the Han River, Korea. The computed flood discharges and the travel times between dams were correlated with the duration and the magnitude of flood release rate at the upstream reservoir, and hence a multiple regression model is proposed for each river reach between a pair of dams. The peak flood discharge at a downstream location can be converted to the peak flood stage by a rating curve. Hence, the proposed regression model could be used to forecast the peak flood stage at a downstream location and the flood travel time between dams using the information on the flood travel time, release rate and duration from the upper dam.

• Journal of the military operations research society of Korea
• /
• v.16 no.2
• /
• pp.135-150
• /
• 1990

This paper classifies faults into three types : simple, degenerated, and regenerated faults. This paper also deals with the characteristics of each type of fault to determine the software reliability based on the assumption; i. e., a system consisting of several subsystems (modules) which may be debugged simultaneously. For each type of fault, several formulas are developed to obtain the failure rate and the expected number of failures found during debugging. A model is developed based on the formulas of the failure rate and the expected number of failures to decide the optimal release time of a new software: minimizing the total cost with constraints restricting to the failure rate of each module in the software. By using this model, optimal release times are found for some cases; the eliminated faults are assumed simple faults only, regenerated faults only, simple and degenerated faults, and so on.

• The Korean Journal of Pharmacology
• /
• v.29 no.2
• /
• pp.263-274
• /
• 1993

Potassium $(K^+)$ channels are present in airway smooth muscle cells, and their activation results in hyperpolarization and relaxation. Because these effects may have therapeutic relevance to hypersensitivity and asthma, we examined the effect of a potassium channel activator, cromakalim (BRL 34915, CK) on the release of mediators from superfused tracheal and parenchymal strips after passive sensitization with $IgG_1$ antibody. Both tissues were superfused with CK $(2{\times}10^{-6}\;M)$ for 30 min and challenged with CK and antigen (Ox-HSA). Using monodispersed, partially purified, highly purified guinea pig lung mast cells, we also examined the effect of CK on mediator release from these cells after passive sensitization with $IgG_{1}$ antibody $({\alpha}-OA)$. Guinea pig lung mast cells were purified using enzyme digestion method, count current elutriation, and discontinuous Percoll density gradient. After CK pretreatment, passively sensitized mast cells were challenged with varying concentration of antigen (OA, immunological stimuli) or with varying concentration of calcium ionophore (CaI, non-immunological stimuli). Histamine (Hist) release was determined by spectrophotofluorometry, and leukotrienes (LT) by radioimmunoassy. CK pretreatment decreased Hist by 35% and LT release by 40% in the antigen-induced tracheal tissue after $IgG_1$ sensitization but did not decrease the contractile response. In the antigen-induced parenchymal tissue CK decreased Hist release by 25% but poorly decreased LT. Both immunologic and non-immunologic stimuli caused a dose-dependent release of Hist and LT from monodispersed, partially purified and highly purified lung mast cells. Verification of LT release was obtained by the use of 5-lipoxygenase inhibitor, A64077 (Zileuton). CK decreased Hist and LT release by 20% respectively in the OA-induced guinea pig lung mast cells after $IgG_1$ sensitization. The inhibitory effects of CK on the Hist and LT release in the Ox-HSA-induced airway smooth muscle tissues or in the OA-induced and CaI-induced mast cells after $IgG_1$ sensitization were completely blocked by TEA and GBC. These studies show that guinea pig lung mast cells seem to be an important contributor to LT release, and that CK (which has been known as an airway smooth muscle relaxant) can in part act to inhibit mediator release in the antigen-induced airway smooth muscle, and that CK may also act to inhibit mediator release in the OA-induced and CaI-induced highly purified mast cells. These results suggest that Hist and LT release evoked by mast cell activation might in part be associated with $K{^+}4 channel activity.

• Archives of Pharmacal Research
• /
• v.20 no.4
• /
• pp.324-329
• /
• 1997

AB-type amphiphilic copolymers (abbreviated as LE) composed of poly (L-leucine) (PLL) as the A component and poly (ethylene oxide) (PEO) as the B component were synthesized by the ring-opening polymerization of L-leucine N-carboxy-anhydride initiated by methoxy polyoxyethylene amine $(Me-PEO-NH_2)$ and characterized. Core-shell type nanoparticles were prepared by the diafiltration method. Particle size distribution obtained by dynamic light scattering was dependent on PLL composition and the size for LE-1, LE-2 and LE-3 was $369.6{\pm}267$, $523.4{\pm}410$ and $561.2{\pm}364 nm$, respectively. Shapes of the nanoparticies observed by transmission electron microscope (TEM) were almostly spherical. The critical micelle concentration (CMC) of the nanoparticles determined by a fluorescence probe technique was dependent on the composition of hydrophobic PLL, and the CMC for LE-1, LE-2 and LE-3 was $2.0{\times}10^{-6},1.7{\times}10^{-6}$ and $1.5{\times}10^{-6}(mol/l) $, respectively. Clonazepam release from core-shell type nanoparticles in vitro was dependent on PLL composition and drug loading content.

• Microbiology and Biotechnology Letters
• /
• v.13 no.4
• /
• pp.403-408
• /
• 1985

Enhancement of surfactant on release of secretory enzyme, such as $\alpha$-amylase, acid phosphatase and alkaline phosphatase, was investigated during submerged culture of Rhizopus oryzae. Morphological changes of colony was occured; small pelletal form in 0.18mM of sodium dodecyl sulfate, pulpy form in 0.48mM of sodium deoxycholate, and filamentous form in absence of surfactant. It. Supplement of sodium dodecyl sulfate induced 9 times increasing activity of $\alpha$-amylase and that of acid phosphatase 25 times in cultural fluids. Alkaline phosphatase was increased 11 times in cultural fluid and also stimulated in cytoplasm with supplement of sodium deoxycholate.

• YAKHAK HOEJI
• /
• v.55 no.4
• /
• pp.284-288
• /
• 2011

The test method for biologics of lot release system is based on 'Test procedure and specification for biological products,' generally, thimerosal content is measured by chemical analysis using O.D. In this study, the comparative analysis was carried out using the gold amalgamation method for thimerosal content was compared to the existing methods, which are described above. The gold amalgamation method, which uses atomic absorption spectrophotometry, was meets all the method validation acceptance criteria. It is considered to be proper as the assay and identification test for thimerosal. In this study, the comparative analysis was performed three times. As a result, gold amalgamation method is more convenient and easy to perform as this assay doesn't have pre-treatment procedure. Also this assay showed good precision and reproducibility compared to the conventional method. Therefore, it is appropriate to alternate the assay method of thimerosal from the conventional chemical analysis to gold amalgamation method to improve the credibility of lot release system and the quality control of biologics, by standardizing test method.

• Korean Journal of Ecology and Environment
• /
• v.38 no.3 s.113
• /
• pp.372-381
• /
• 2005

This study was conducted to test the efficiency of water quality improvement using the dissolved air flotation (DAF) technique in a shallow eutrophic reservoir. The application of DAF was followed by the addition of a chemical coagulant (poly aluminum chloride; PAC). The experiment was conducted in the mesocosm scale (wide ${\times}$ length ${\times}$ depth: 6 m ${\times}$ 6 m ${\times}$ 3 m). Suspended solids (SS) and volatile SS (VSS) concentration decreased by 54 ${\sim}$ 71% and 57 ${\sim}$ 79% of the initial concentrations, respectively. Total phosphorus and Chl- a concentration also decreased by 74 ${\sim}$ 92% and 54 ${\sim}$ 98%, respectively. BOD decreased by>86% while COD decrease ranged 29 ${\sim}$ 63%. Dissolved inorganic P (DIP) and dissolved total P (DTP) concentration decreased by 34 ${\sim}$ 88% and 62 ${\sim}$ 88%, respectively. After DAF application further onto the sediment, DIP-release rates from the sediment decreased by 17% (0.82 ${\to}$ 0.68 mg $m^{-2}$$day^{-1}$ in the oxic condition and 23% (2.27 ${\to}$ 1.76 mg $m^{-2}$$day^{-1}$) in the anoxic condition, compared to the release rate from the untreated sediment. DTP-release rate from both the oxic and anoxic sediments also decreased by 33% (5.62 ${\to}$ 3.78 mg $m^{-2}$$day^{-1}$) and 20% (6.23 ${\to}$ 4.99 mg $m^{-2}$$day^{-1}$), respectively. These results suggest that the DAF application both to the water column and onto the sediment be effective to improve water quality by removing particulate matters in the water column as well as reducing P-release from the sediment.