• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.13-20
• /
• 2008

Power quality problems such as momentary interruptions and voltage sags do not great influence on loads at past. However, the interests in power quality problems increase as the use of sensitive loads with microprocessor like computers increases recently. Accordingly, power system reliability research focusing to sustained interruption and momentary interruption partially needs more accurate evaluation methods including momentary and instantaneous problems. That is, many sensitive loads being tripped by voltage sags result in interruption costs. In this paper, new reliability worth evaluation method is presented considering voltage sags. We calculated the magnitude of voltage sags using fault studies and the duration of voltage sags using the trip time of protective relays for each fault. Moreover, we includes the customer interruption cost resulted from sensitive load trip by voltage sags. Through case studies, we evaluate the effects of voltage sags for permanent faults.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.3
• /
• pp.520-526
• /
• 2018

In this paper, considering the superposition transmission-based wireless cooperative multicast communication system (ST-CMS) with multiple relays and destinations, we propose a relay selection scheme to improve the data rate of multicast communication. In addition, we adopt the optimal power allocation coefficient for the superposition transmission to maximize the data rate of the proposed relay selection scheme. To propose the relay selection scheme, we derive an approximate expression for the data rate of the ST-CMS, and present the relay selection scheme using only partial channel state information based on the approximate expression. Moreover, we derive an approximate average data rate of the proposed relay selection scheme. Through numerical investigation, comparing the average data rates of the proposed relay selection scheme and the optimal relay selection scheme using full channel state information, we show that the proposed scheme provides extremely similar performance to the optimal scheme in the high signal-to-noise power ratio region.

• Journal of Korea Multimedia Society
• /
• v.11 no.7
• /
• pp.986-996
• /
• 2008

The home network environment based on the power line communication has some unexpected events. The noise source from the home appliances makes the network impedance increased, and the transmission packets distorted. Therefore the packet transmission from the source node may not be delivered to the destination node directly. In this paper we propose a new self-healing mechanism which relays the packet to the directly unreachable destination automatically with the help of intermediate nodes. In order to choose the minimum required intermediate nodes our mechanism makes a spanning tree with both the directly reachable nodes and indirectly reachable nodes via the intermedia nodes. We developed the network simulator in order to compare its performance to the Echelon's repeater selecting mechanism. Though it required more packet relations than Echelon's but the reachable probability to the destination was highly increased about two times.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.70-80
• /
• 2012

In this paper, we consider the amplify-and-forward relaying systems with the relay selection (AF-RS) using full channel information (FCI) and using partial channel information (PCI), respectively, in which the direct communication link between a source and a destination is available. And, the outage probabilities for the AF-RS using FCI and using PCI are investigated in Rayleigh fading channels, respectively. We provide exact outage probabilities, tight outage probability lower bounds, and asymptotic outage probabilities, respectively. And also, we present coding gains achievable by the AF-RS using FCI and using PCI. Through numerical investigation, all the analytic expressions are verified, and the coding gains are respectively evaluated with different average channel powers for the first and the second hop as well as different numbers of relays.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.39-45
• /
• 2019

Recently, Cognitive radio (CR) has been focused for the effective utilization of the limited spectrum. Since an overlay CR system shares the given spectrum with the unlicensed system simultaneously, its spectral efficiency is high. However, most of the studies on an overlay CR system have been focused on the performance enhancement of the licensed receiver (LR). Correspondingly, the performance of the unlicensed receiver (UR) is degraded. Therefore, we propose an overlay CR NOMA system to improve the performance both of the LR and UR, which has a selected relay for the UR and adjusts the power allocation for the LR. The analytical performance of the proposed system is derived and verified the results through simulation. It is noticed that the UR can be obtained signal-to-noise ratio (SNR) gains by the selected relay, consequently, the system performance can be improved. Also, we show that the performance of the proposed system can be controlled by the number of the relays as well as the power allocation ratio. The results reveal that the required performance of the system can be satisfied with the use of the selected relay under the limited transmit power.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.547-550
• /
• 2009

This paper presents a digital based input/output interface circuit for controlling and monitoring the Diesel Engine Generator for Emergency. In order to monitor and control of the Emergency Diesel Engine Generator, controlling and monitoring circuits need 5 analog input channels, 2 pick-up coil measuring circuits, 10 digital input channels containing Broken Wire Detect function, and 7 relay control signal output channels. This system performs signal processing of input signal taking advantage of simple filter circuit, photo-coupler and comparator circuit at analog input parts, and output signals for main relay is designed acting by double control, so it prevents malfunction completely. And it improves accuracy of speed input signal by applying digital circuit that processes pick-up coil signal.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.6
• /
• pp.211-223
• /
• 2018

Mobile relay systems have been adopted by $4^{th}$ generation mobile systems as an alternative method to extend cell coverage as well as to enhance the system throughput at cell-edges. In order to achieve such performance gains, the mobile relay systems require path selection and resource allocation schemes that are specifically designed for these systems which make use of additional radio resources not needed in single-hop systems. This paper proposes an integrated path selection and resource allocation scheme for LTE-Advanced relay systems using collaborative communication. We first define the problem of maximizing the downlink throughput of LTE-Advanced relay systems using collaborative communication and transform it into a multi-dimensional multi-choice backpacking problem. The proposed Lagrange multiplier-based heuristic algorithm is then applied to derive the approximate solution to the maximization problem. It is shown through simulations that the approximate solution obtained by the proposed scheme can achieve a near-optimal performance.

• Biomedical Engineering Letters
• /
• v.8 no.4
• /
• pp.365-371
• /
• 2018

Uninterrupted monitoring of multiple subjects is required for mass causality events, in hospital environment or for sports by medical technicians or physicians. Movement of subjects under monitoring requires such system to be wireless, sometimes demands multiple transmitters and a receiver as a base station and monitored parameter must not be corrupted by any noise before further diagnosis. A Bluetooth Piconet network is visualized, where each subject carries a Bluetooth transmitter module that acquires vital sign continuously and relays to Bluetooth enabled device where, further signal processing is done. In this paper, a wireless network is realized to capture ECG of two subjects performing different activities like cycling, jogging, staircase climbing at 100 Hz frequency using prototyped Bluetooth module. The paper demonstrates removal of baseline drift using Fast Fourier Transform and Inverse Fast Fourier Transform and removal of high frequency noise using moving average and S-Golay algorithm. Experimental results highlight the efficacy of the proposed work to monitor any vital sign parameters of multiple subjects simultaneously. The importance of removing baseline drift before high frequency noise removal is shown using experimental results. It is possible to use Bluetooth Piconet frame work to capture ECG simultaneously for more than two subjects. For the applications where there will be larger body movement, baseline drift removal is a major concern and hence along with wireless transmission issues, baseline drift removal before high frequency noise removal is necessary for further feature extraction.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.562-567
• /
• 2020

In this paper, this is a study on the correction of protection relays to monitor temporary power facilities for storage tanks especially transformers to block and protect faults such as insulation breakdown. When an abnormality such as a short circuit or a ground fault occurs in the power system, it is important to detect this quickly cut off the device and equipment in which the fault occurred and separate it from the power system to correct the protection relay so that it does not interfere with power supply. In addition the fault current calculation that accurately applies the fault type and the cause of the fault for protection cooperation will be the most important factor in the correction of the protection relay. For protection coordination a study was conducted on the method of coordination for protection of power facility protection for storage tanks such as over current relay, ground over current relay, under voltage relay, and ground over voltage relay applied to temporary.

• Journal of the Institute of Convergence Signal Processing
• /
• v.22 no.4
• /
• pp.199-205
• /
• 2021

The distributing board in directly installed on the ground or the bottom surface of the building, and when vibrations such as earthquakes or external shocks occur, the possibility of damage or malfunction of electric components such as internal power devices, wiring, and protection relays increases. Recently, the need for a seismic type distributing board is increasing, and research and development of a distributing board having a vibration damping function and product launch are being conducted. In this paper, an IoT-based data collection device system capable of measuring vibration and environmental data of distributing board was designed and implemented. When vibration occurred on the distributing board, data was stored and visualized in the MySQL DB through Node-RED for monitoring and data storage using the MQTT protocol for reliable messaging transmission. The test was conducted by attaching the IoT device of the distributing board, and data was collected in real-time and monitored through Node-RED.