• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.1
• /
• pp.168-186
• /
• 2016

In this paper, we investigate the degrees of freedom (DoF) of a two-cluster multiple-input multiple-output (MIMO) multiway relay interference channel (mRIC), where there are two relays and two users per cluster. In this channel, users within the same cluster exchange messages among themselves with the help of two relays.We first obtain the DoF upper bound of the considered MIMO mRIC based on cut-set bound. Then, we propose a novel transmission strategy, blind interference neutralization (BIN), to approach the DoF upper bound. This new method utilizes the overheard information at two relays and focuses on the beamforming matrix designs at two relays so that the channel state information (CSI) at users is not required. Through theoretical analysis and numerical simulations, we show that the DoF upper bound can be obtained by using the BIN scheme. From simulation results, we show that the proposed BIN scheme can provide significant performance gain over the conventional time division multiple access (TDMA) scheme in terms of DoF. In addition, we show that the BIN scheme is a superior approach to the existing signal space alignment (SSA) schemes for the considered mRIC.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.655-659
• /
• 2010

In the conventional PNC scheme, the relay node requires simultaneous transmission of two source nodes with strict power control and carrier-phase matching between two received symbols. However, this pre-equalization process at source nodes is not practical in fading channels. In this letter, we propose a novel physical-layer network coding (PNC) scheme with log-likelihood ratio (LLR) conversion for fading channels, which utilizes not pre-equalizer at transmitters (source nodes) but joint detector at receiver (relay node). The proposed PNC requires only channel side information at the receiver (CSIR), which is far more practical assumption in fading channels. In addition, the proposed PNC scheme can use the conventional modulation scheme like M-QAM regardless of modulation order, while the conventional PNC scheme requires reconfiguration of modulation scheme at the source nodes for detection of the received signal at relay node. We consider the combination of the proposed PNC and channel coding, and find that the proposed PNC scheme is easily combined the linear channel codes such as turbo codes, LDPC, and convolutional codes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.3
• /
• pp.225-236
• /
• 2002

In this paper, to counteract a cross-polarization interference caused by co-channel dual polarization technique of digital radio relay system(DRRS), we analyze the theoretical model and digital design of cross-polarization interference canceller(XPIC). In addition a complex adaptive time domain equalizer(ATDE) is designed using a finite impulse response filter, and the structure of XPIC and its control method are also illustrated including ATDE. Our computer simulation shows that about 25 dB signature and more than 23 dB XPIC improvement factor can be obtained with XPIC and ATDE. In order to verify the operation of designed XPIC, we review the simulated results in view of tap number, algorithm convergence, system signature, and XPlC improvement factor in connection with 64-QAM DRRS with co-channel dual polarization.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.67-71
• /
• 2015

In this Paper, we proposed optimization of system performance, power splitting protocols applied to relay in the cooperative communication undergo co-channel interference. When relay adjust power distribution factors undergo co-channel interference, it is possible to optimize and maximize the channel capacity of the receiver. Because of energy haversting, interfence transfer to new power source. If finding the optimal power levels, to solve inability in system, and to increase the efficiency of the network. Finally, performance of the proposed protocol is analyzed in terms of outage probability, capacity of system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5410-5426
• /
• 2019

With the advent of the fifth-generation (5G) era, Massive multiple-input multiple-output (MIMO) relay systems have experienced the rapid development. Recently, the performance analysis models of Massive MIMO relay systems have been proposed, which are mostly based on Rayleigh fading channels. In order to create a more suitable model for 5G Internet of Things scenarios, our study is based on the Rician fading channels, where line-of-sight (LOS) path exists in the channels. In this paper, we assume the channel state information (CSI) is perfect. In this case, we use statistical information to derive the analytical exact closed-form expression for the achievable sum rate of the uplink for the Massive MIMO two-hop relay system over Rician fading channels. Moreover, considering the different communication scenarios, we derive the analytical exact closed-form expression for the achievable sum rates of the uplink for other three scenarios. Finally, based on these expressions, we make simulations and analyze the performance under different transmit powers and Rician-factors, which provides a theoretical basis and reference for further research.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.3
• /
• pp.1301-1312
• /
• 2020

Using decode-and-forward relaying in the cognitive radio networks, the spectrum efficiency can improve furthermore. The optimization algorithm of the spectrum sensing estimation time is presented for the cognitive relay networks in this paper. The longer sensing time will bring two aspects of the consequences. On the one hand, the channel parameters are estimated more accurate so as to reduce the interferences to the authorized users and to improve the throughput of the cognitive users. On the other hand, it shortens the transmission time so as to decease the system throughput. In this time, it exists an optimal sensing time to maximize the throughput. The channel state information of the sub-bands is considered as the exponentially distributed, so a stochastic programming method is proposed to optimize the sensing time for the cognitive relay networks. The computer simulation results using the Matlab software show that the algorithm is effective, which has a certain engineering application value.

• Journal of information and communication convergence engineering
• /
• v.11 no.4
• /
• pp.229-234
• /
• 2013

Diversity-multiplexing tradeoff (DMT) characterizes the fundamental relationship between the diversity gain in terms of outage probability and the multiplexing gain as the normalized rate parameter r, where the limiting transmission rate is give by rlog SNR (here, SNR denote the received signal-to-noise ratio). In this paper, we analyze the DMT and performance of an underwater network with a cooperative relay. Since over an acoustic channel, the propagation delay is commonly considerably higher than the processing delay, the existing transmission protocols need to be explained accordingly. For this underwater network, we briefly describe two well-known relay transmissions: decode-and-forward (DF) and amplify-and-forward (AF). As our main result, we then show that an instantaneous DF relay scheme achieves the same DMT curve as that of multiple-input single-output channels and thus guarantees the DMT optimality, while using an instantaneous AF relay leads at most only to the DMT for the direct transmission with no cooperation. To validate our analysis, computer simulations are performed in terms of outage probability.

• Journal of IKEEE
• /
• v.27 no.4
• /
• pp.411-417
• /
• 2023

Unmanned aerial vehicle (UAV)-assisted relay has the advantages of ease of deployment, good communication channels, and mobility over traditional terrestrial relay, which greatly improves wireless connectivity. In this paper, we design a UAV-enabled relay network that can utilize radio frequency bands to harvest energy from sources and utilize terahertz (THz) bands to transmit information between secondary transmitters and receivers. Next, we solve the optimal position of the UAV that maximizes the relay channel capacity, and propose an algorithm to design two trajectories of UAV (a straight and an elliptical trajectory) using the derived solution. Numerical results show that the straight trajectory is better in terms of harvested energy and channel capacity.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.25-28
• /
• 2001

In this paper. to eliminate a cross-polarization interference caused by co-channel dual polarization technique of digital radio relay system(DRRS), a cross-polarization interference canceller(XPIC) is analysed in terms of the analytical modeling, digital design, and its performance. By virtue of a 13-tap adaptive equalizer and XPIC, about 23dB in XPIC improvement can be obtained by computer simulation. To show the operation of designed XPIC, some simulated results are reviewed under 64-QAM DRRS with co -channel dual Polarization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.215-222
• /
• 2011

In this paper, we propose a power control scheme for effective serving cell selection in Relay environment of 3GPP (3rd Generation Partnership Project) LTE (Long Tenn Evolution)-Advanced system. A conventional serving cell selection scheme which does not use channel states of backhaul link has a problem that this scheme does not select serving cell supporting maximum throughput. Also, conventional proposed serving cell selection schemes that eNB or RN transmits channel states of backhaul link have problems that conventional schemes need to additional data transmission, serving cell selection process complexity is increased because UE considers channel states of backhaul link, and received signal is degraded because strong interference which is transmission signal from RN. Therefore, for solve these problems, we propose power control scheme that RN control transmission power according to received SINR (Signal to Interference plus Noise Ratio) of backhaul link. By extensive computer simulation, we verify that the power control Relay scheme is attractive and suitable for the Relay environment.