• 한국음향학회지
• /
• 제33권1호
• /
• pp.54-59
• /
• 2014

본 논문은 비정상 (nonstationary)특성을 가지는 잡음환경에서 마이크간 전달함수 비 (RTF, Relative Transfer Function) 추정 알고리즘을 제안한다. 음성을 이용한 다양한 기기에 다중 마이크를 이용한 잡음제거 기술은 널리 사용되며, 이때 각 마이크간의 입력 신호 사이의 관계는 필수적으로 추정되어야 한다. 본 논문에서는 기존의 OM-LSA(Optimally-Modified Log-Spectral Amplitude)기반의 추정 방식에 CASA (Computational Auditory Scene Analysis)를 접목시킨 방식을 제안한다. 제안한 방법의 성능 검증을 위하여 비정상 백색 잡음 (nonstationary white Gaussian noise) 환경에서 10명 화자 발음을 이용한 마이크간 전달함수 비 추정 성능 평가 실험을 수행하였다. 잡음 신호가 초당 8dB 증감하는 환경에서 SBF (Signal Blocking Factor)가 평균 2.65dB 개선됨을 확인하였다.

• 한국자동차공학회논문집
• /
• 제5권4호
• /
• pp.84-92
• /
• 1997

Among the various sources of vehicle interior noise, this paper concerns the road induced noise ; the identification of its transfer path by using experimental method. Multiple input and single output model is taken as a noise generation model. Because it is impossible to measure the road imput forces directly, the acceleration signals are measured on four axle;three directions for each point. By considering the cross correlations of input signals, four uncorrelated source groups are taken. Multiple coherence function is employed to investigate the contribution of each group. In addtion, to identify the detailed path through the suspension systems, the contributions of all possible paths are ranked by using the coherence functions between interior noise and the relative accelerations of connections such as bushings and mountings. Measurements are performed with passenger vehicle traveling on concrete and asphalt roads at 60㎞/h.

• 대한교통학회지
• /
• 제27권1호
• /
• pp.35-42
• /
• 2009

환승센터의 계획이나 개선시 제일 먼저 부딧히는 문제의 하나는 어느 수단을 얼마나 가깝게 위치시켜야 하는가 하는 것이다. 이때의 목표는 중심 수단을 이용하는 승객이 가능한 한 최단거리를 걸어서 다른 수단으로 연결될 수 있게 하는 것이다. 이 문제가 결정되고 난 후에 라야 연결 통로에 대한 서비스 수준을 향상시키는 문제를 제기할 수 있다. 물리적인 접근 거리가 너무 긴 경우 개별 통로의 서비스수준을 아무리 높여도 전체적인 환승만족도가 일정수준이상 향상되기 어렵기 때문이다. 본 연구에서는 한 수단의 도착지에서 다른 수단의 출발지까지의 전 과정 (환승패스)을 외부보도구간, 계단구간, 실내통로구간으로 나누어 이용자 설문조사를 통하여 상대적인 저항감을 구하여 합산된 환승저항을 계산하고, 이를 전반적인 환승만족도와 연결시켜 환승효용함수를 구하고 이를 토대로 환승패스의 개선 방향을 결정하는 방법을 논하였다.

• ETRI Journal
• /
• 제39권1호
• /
• pp.76-86
• /
• 2017

In this study, we propose an automatic contrast enhancement method based on transfer function modification (TFM) by histogram equalization. Previous histogram-based global contrast enhancement techniques employ histogram modification, whereas we propose a direct TFM technique that considers the mean brightness of an image during contrast enhancement. The mean point shifting method using a transfer function is proposed to preserve the mean brightness of an image. In addition, the linearization of transfer function technique, which has a histogram flattening effect, is designed to reduce visual artifacts. An attenuation factor is automatically determined using the maximum value of the probability density function in an image to control its rate of contrast. A new quantitative measurement method called sparsity of a histogram is proposed to obtain a better objective comparison relative to previous global contrast enhancement methods. According to our experimental results, we demonstrated the performance of our proposed method based on generalized measures and the newly proposed measurement.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.9-14
• /
• 2001

A new model utilizing a transfer function is introduced in the present paper for analizing motion errors of hydrostatic tables. Relationship between film reaction force in a single hydrostatic pad and form error of a guide rail is derived at various spacial frequencies by finite element analysis, and it is expressed as a transfer function. This transfer function clarifies so called averaging effect of the oil film quantitively. For example, it is found that the amplitide of the film reaction force is reduced as the spacial frequency increases or relative width of the pocket is reduced. Motion errors of a multiple pad table is estimated from transfer function, geometric relationship between each pads and form errors of a guide rail, which is named as Transfer Function Method. Calculated motion errors by TFM show good agreement with motion errors calculated by Multi Pad Method, which is considered entire table as an analysis object. From the results, it is confirmed that the proposed TFM is very effective to analyze the motion errors of hydrostatic tables.

• 한국정밀공학회지
• /
• 제19권5호
• /
• pp.56-63
• /
• 2002

A new model utilizing a transfer function is introduced in the present paper for analizing motion errors of hydrostatic tables. Relationship between film reaction force in a single hydrostatic pad and form error of a guide rail is derived at various spacial frequencies by finite element analysis, and it is expressed as a transfer function. This transfer function clarifies so called averaging effect of the oil film quantitively. For example, it is found that the amplitide of the film reaction farce is reduced as the spacial frequency increases or relative width of the pocket is reduced. Motion errors of a multiple pad table is estimated from transfer function, geomatric relationship between each pads and form errors of a guide rail, which is named as Transfer Function Method(TFM). Calculated motion errors by TFM show good agreement with motion errors calculated by Multi Pad Method, which is considered entire table as an analysis object. From the results, it is confirmed that the proposed TFM is very effective to analyze the motion errors of hydrostatic tables.

• International Journal of Precision Engineering and Manufacturing
• /
• 제4권2호
• /
• pp.64-70
• /
• 2003

A new method using a transfer function is introduced in the present paper for analyzing the motion errors of hydrostatic bearing tables. The relationship between film reaction force in a single-side hydrostatic pad and the form error of guide rail is derived at various spatial frequencies by finite element analysis, and it is expressed as a transfer function. This transfer function clarifies so called 'the averaging effect of an oil film' quantitively. It is found that the amplitude of film force is reduced as the spatial frequency increases or the relative width of the pocket is reduced. The motion errors of a multi pad type table are estimated using a transfer function, the form errors of a guide rail and the geometric relationship between the pads. The method is named as the Transfer Function Method (TFM). The motion errors calculated by the TFM show good agreement with the motion errors calculated by the Multi Pad Method considering the entire table as an analysis object. From the results, it is confirmed that the proposed TFM is very effective to analyze the motion errors of hydrostatic tables.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.1051-1059
• /
• 1992

Two types of digital repetitive control systems are analyzed and designed to reduce the error spectrum including not only harmonic but also non-harmonic components. First, a novel gain scheduling algorithm is suggested for conventional and modified repetitive controller is scheduled to reduce the infinite norm of error in frequency domain. For this, the relative error transfer function is mewly defined as the ratio of the error spectrum for the system with a repetitive controller to the error spectrum for the system with a repetitive controller to the error spectrum for the system without a repetitive controller. Secondly, as an alternative of a repetitive control system with the gain scheduling, a repetitive control system with higher order repetitve function is analyzed and designed, where instead of equal weightings, weightings of the higher order repetitive function is determined in such a way that the infinite norm of relative error transfer function is minimized. To show the validities of proposed methods, computer simulation results are illustrated for a typical disk drive head positioning servo system.

• 반도체디스플레이기술학회지
• /
• 제1권1호
• /
• pp.1-7
• /
• 2002

Modem technology depends on the reliability of extremely high precision equipments. In the production of semiconductor wafer, optical and electron microscopes, ion-beam, laser device must maintain their alignments within a sub-micrometer. This equipment requires a vibration free environment to provide its proper function. Therefore, this high technology equipments require very strict environmental vibration criteria because it is used as basic data for the design of building structure and structural dynamics of equipment. In this paper, the new approach is proposed to investigate the mismatch problem of time and frequency domain for vibration criteria of sensitive equipment. The proposed approach is based on a vibration measurement data and a relative transfer function which can be obtained by experiment or analysis.

• 한국지반환경공학회 논문집
• /
• 제2권4호
• /
• pp.51-61
• /
• 2001

본 논문에서는 지반의 상대다짐도(RC)와 매입말뚝의 근입비에 따른 하중-침하 거동을 연구하기 위하여 모형실험과 하중전이 함수를 이용한 해석을 수행하였다. 모형시험에서 말뚝은 근입비(L/D)를 15, 20, 25로 설치하였고, 지반의 상대다짐도를 85%, 95%로 각각 조성하였으며 말뚝주면은 시멘트를 주입하였다. 본 논문은 매입말뚝의 해석을 위하여 Vijayvergia의 하중전이 모델, Castelli 모델, Gwizdala의 탄소성-완전소성 모델, coyle의 제안식 등을 사용하여 실험결과와 비교하였으며, 매입말뚝의 하중-침하 거동을 예측하는데 가장 적합한 하중전이 방법을 제안하였다. 하중전이 함수에 의한 지지력 예측 결과 매입말뚝의 극한 지지력은 Coyle의 제안식이 실측값에 가장 근접한 것으로 나타났으며, 초기 하중-침하 거동은 Castelli에 의한 함수가 가장 유사하게 하중-침하 거동을 평가하는 것으로 나타났다. 매입말뚝의 축하중 해석결과 하중전이법에 의해 평가된 주면마찰력이 실측값보다 과소평가 되는 것으로 나타났다.