• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.145-145
• /
• 2008

High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).

• Journal of the Korea Concrete Institute
• /
• v.18 no.6 s.96
• /
• pp.819-825
• /
• 2006

The objective of the present study is to verify the validity of a new truss model for evaluating the contribution by arch action to shear resistance in shear-critical reinforced concrete beams. The new truss model is based on the relationship between shear and bending moment in a beam subjected to combined shear and bending. The compatibility condition of the shear deformation that deviates from Bernoulli bending plane is formulated utilizing the smeared truss idealization with an inclined compression chord. The Modified Compression Filed Theory is employed to calculate the shear deformation of the web, and the relative axial displacements of the compression and the tension chord by the shear flow are also calculated. From this shear compatibility condition in a beam, the shear contribution by the arch action is numerically decoupled. Then the validity of the model is examined by applying the model to some selected test beams in literatures. On the basis of the analytical results, the contribution by the web to shear resistance can be constant and have an excellent linear correlation with the web reinforcement ratio. The present decoupling approach may provide a simple way for the assessment of the role of each parameter or mechanism that affects the ultimate shear behavior of reinforced concrete beams.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.159-168
• /
• 2019

This study aims to find out the causal factors associated with vitamin D levels of Koreans after research. The data used in the study by KNHANES VI-2. Cross-analysis was performed to find factors related to serum vitamin D and relative risk was assessed by logistic regression. The estimated summary Odds ratio of groups under 40 was 4.1, Spring and Winter was 4.2, of region was 2.1, of Smoker was 1.8, of not supplementation intake was 2.1, and of sedentary lifestyle 1.1 in male group. And the estimated summary OR of group under 40 was 1.9, of occupation was 4.5, of not supplementation intake was 3.0 in female group. Different results by gender are thought to be related to lifestyle and behavior. It is considered that supplementation intake and outdoor activities should be increased as an important means to recover. It is expected to be used as basic data for preventing disease of Koreans and to conduct further experimental research.

• Journal of Environmental Science International
• /
• v.17 no.3
• /
• pp.287-296
• /
• 2008

A comprehensive quality survey for heavy metals, organophosphorous and organochlorine residual pesticides, and coplanar PCBs in samples such as water, sediments and soils as well as spiders has been implemented. The samples were undertaken at nine stream sites and their vicinity in August 2006, representing different surrounding environments. The levels of PCBs were expressed as concentrations and WHO-TEFs. Among 12 coplanar PCBs as target compounds in this study, 2,3', 4,4', 5-PentaCB (IUPAC # 118) was the congener with the highest concentration. The total concentrations and TEF values of coplanar PCBs in Siheung stream sediment (heavy industrial complex site located in Ansan city) were 3915.50 pg/g and 0.8366 pg-TEQ/g on a dry weight basis, respectively. Such levels were around 40 times higher compared to sediment from Gapyung stream (green site located in the upper of Myunggi mountain). It is probably due to the direct input of PCBs trom PCBs treatment materials. Organophosphorous (EPN, dementon-s-methyl, diazinon, parathion, and phenthoate) and organochlorine (alpha-BHC, aldrin, 4,4'-DDT, 4,4'-DDE, endosulfan alpha and etc.) pesticides were not detected above 5 ppb of detection limits. The concentrations of Cu and Cd in water and sediment samples from Siheung stream were 44.11 and $0.17ug/m\ell$ and $713.42{\mu}g/g$ and $3.73{\mu}g/g$, respectively, which contained $20\sim40$ times higher concentrations than those from Gapyung stream. In addition to the water and sediment samples, the levels of heavy metals in spider from designated sampling sites were also determined. Heavy metals in spider collected near Siheung stream was appeared to be equivalent and/or a little higher levels with respect to other spiders. Furthermore, the ratio of relative heavy metals (Cu, Cd, and Pb) in spider from each stream site showed a correlation as similar as that of heavy metals in soil samples.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.1
• /
• pp.71-82
• /
• 1996

In this paper, the Doppler phase error due to the relative velocity between a satellite and the earth station in communications using a low earth orbit mobile satellite is detected. The performance of BPSK system in the presence of Rician fading with Doppler phase error and interference, noise is compared with that of the system disturbed by Doppler phase error and noise only. The expression of error rate performance of BPSK system is derived as the type of complementary error function. The numerical calculation of the induced equation are performed in terms of satellite-height, orbit-eccentricity, the velocity of the earth, Rician fading parameter, signal to interference rateio (SIR), the ratio of carrier frequency and base band bit rate. The main conclusion that can be drawn from this analysis is that Rician fading channel environment with Doppler phase error and interference effect yields severe performance degradation than Do- ppler phase error and noise effect in satellite communication channel. And using the numerical calculation, we give a quantitative insight how much the satellite communication channel parameters degrade the system performance. Furthermore it is shown that an appropriate transmission power control for the performance enhancement is beneficial to the new satellite communication system planning.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.7
• /
• pp.689-695
• /
• 2012

The friction factor in a rod bundle and the loss coefficient at a spacer grid were examined. As a test section, 25 smooth rods, 9.5 mm in diameter and 2000 mm in length, were prepared and installed in a $5{\times}5$ square array in a square channel. In this case, the P/D (Pitch-to-Diameter ratio) was 1.35. In this work, plain (i.e., no mixing vanes), split-vane, and hybrid-vane spacer grids were tested. In a bare rod bundle (i.e., no spacer grid), the measured friction factors were in good agreement with the previous correlations. Among the spacer grids tested, the hybrid-vane spacer grid presented the largest friction factor in the rod bundle and loss coefficient. This may be because of the flow pattern change induced by large relative plugging of the flow cross section and mixing vane geometry. At Re=$5{\times}10^5$, the predicted loss coefficients of plain, splitvane, and hybrid-vane spacer grids were approximately 0.79, 0.80, and 0.88, respectively.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.145-152
• /
• 2010

This study evaluated the fatigue degradation in a SUS316L specimen using the nonlinear ultrasonic method. The nonlinearity of the ultrasonic wave was estimated by a relative nonlinear parameter defined as the ratio of the amplitudes for the fundamental wave to the second harmonic wave. In the experiment, a measurement system with contact transducers was constructed; reliable measurements were assured by keeping measurement conditions consistent and reducing extra harmonics generated in the measurement system. Two types of SUS316L specimen were used in experiments; a rotating bar fatigue specimen and a tensile fatigue specimen. The fatigue condition used was high cycle fatigue. The former specimen had a cylindrical shape and was used to observe the change in the nonlinear parameter after fatigue accumulation in a specimen. The latter was a plate-shaped specimen and was used to confirm the change in the nonlinear parameter at the position where the fatigue stress was concentrated. The measured nonlinear parameter showed a strong correlation to the damage level in both fatigue tests.

• Journal of Preventive Medicine and Public Health
• /
• v.42 no.5
• /
• pp.331-336
• /
• 2009

Objectives : The objectives of this study were to determine the relationship between lifestyle-implementation and metabolic syndrome in an electronics research and development company, and to provide a foundation for health providers of health management programs for setting priorities. Methods : From July 1 to July 16, 2008 we carried out a descriptive cross-sectional survey. Consecutive workers of one R & D company in Seoul, Korea (N=2,079) were enrolled in study. A checklist for lifestyle (from the National Health Insurance Corporation) consisted of questions regarding diet, drinking, smoking and exercise. After the survey, researchers obtained data from health profiles for metabolic syndrome(waist-circumference, triglycerides, HDL cholesterol, blood pressure and fasting blood sugar level). Lifestyle was recorded as good or not good. Statistical analysis of metabolic syndrome and the lifestyle of subjects was done using multiple logistic regression analysis. Results : The prevalence of metabolic syndrome in our study gropu was 13.3% (N=277). After adjustment for age, the adjusted odds ratios (odds ratio, 95% confidence intervals) for metabolic syndrome increased in proportion to the number of bad habits: two (1.72, 1.23-2.44), three (2.47, 1.73-3.56), and four (3.63, 2.03-6.34). Relative to subjects eating both vegetables and meat', the OR for 'meat' eaters was 1.66 (1.18-2.31). Compared with 'nonsmokers and ever-smoker', the OR for 'current-smoker' was 1.62 (1.25-2.10). Compared with 'Healthy drinker', the OR for 'unhealthy drinker' was 1.38 (1.05-1.83). Conclusions : Poor lifestyle was associated with an increased likelihood of metabolic syndrome. These findings suggest that lifestyle-based occupational health interventions for young employees should include a specific diet, smoking cessation, and healthy-drinking programs.

• Korean Journal of Ecology and Environment
• /
• v.36 no.3 s.104
• /
• pp.257-268
• /
• 2003

Daily monitoring was conducted to elucidate the changes in turbidity and distribution of particles in the turbid water of a river-type reservoir (Paltang Reservoir) from 1999 to 2001. Water turbidity and the particle distribution of turbid water were principally affected by meteorological factors particularly rainfall patterns and hydrological factors such as inflow and outflow. The mean concentration of turbidity was constant each year, with the concentration of less than 10 NTU accounting for 85%. Seasonal characteristics were remarkable, with winter and spring having < 5 NTU, autumn 5 ${\sim}$ 10 NTU, and summer > 20 NTU. Unlike hydrological changes, maximum turbidity was observed from late July to early August and continuously increased from 1999 to 2001. In particular, the maximum turbidity of reservoirs remarkably increased toward the lower part of reservoir in 2001. Discharge and turbidity increased or decreased slowly in 1999; in contrast, turbidity rapidly increased in the early rainfall period of 2000 and 2001 but later decreased as discharge increased. In the particles of turbid water, clay ingredients were more densely distributed and more dominant in all stations. Of the total particles in turbid water, clay constituted 63.9${\sim}$66.6% and silt 33.4${\sim}$36.1% to account for a combined total of 98.9 ${\sim}$ 100%. Sand made up less than 1.1%. The turbidity of river-type reservoir was also found to be mainly affected by the biomass of plankton in a non-rainfall period. During a rainfall period, however, the quantity and relative ratio of inorganic particles depending on the soil components affected turbidity.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.3
• /
• pp.313-321
• /
• 2004

Separation-concentration of sulfur containing heterocyclic compounds(SCHC) from many reaction meat flavors manufactured with Maillard reaction was carried out. Profile of SCHC was identified and analyzed by GC and GC-MSD. The results were as follows. 1. Profile of SCHC could be identified 7 kinds thiazole and 11 kinds thiophene, the major produced compounds were thiophene, thiazolidine, 4-methyl-5-thiazole ethanol. 2. In the case of SCHC, relationship between changes of reaction conditions and the kind of produced components were as same, but produced amounts appeared the difference. Producing amount of complexed SCHC and caramellike note as well as oxygen containing heterocyclic compounds were high level more than high reaction temperature and long time reaction period. 3. Producing ratio of comparative simple structural SCHC were the highest level at reaction conditions of moisture content 50%, reaction temperature 100$^{\circ}C$ and reaction time 2 hours. Reaction conditions for the revelation of reaction meat flavor were below 110$^{\circ}C$ and less than 2 hours. 4. Relationship between moisture content and reaction temperature as well as reaction time had very relative relation. From the change of moisture content and reaction conditions could be obtained the simultaneously profile. Signal presentation for production of reaction meat flavor could be from extraction-separation-concentration of SCHC through simplification of raw-materials in the flavor and seasoning food industry.